I should also add, that you could use Bash instead to add some parallelism to the startup of all your servers...
#!/bin/bash # add pre-processing logic, env. setup, whatever here gfsh -e "start server --name=Server1 ..." & gfsh -e "start server --name=Server2 ..." & ... gfsh -e "start server --name=ServerN ..." & # do whatever post processing you want here... You are only really limited by your imagination/creativity, :) Cheers, -j On Sun, Jul 24, 2016 at 3:30 AM, John Blum <jb...@pivotal.io> wrote: > It is easy to script it as a *Gfsh* shell script, for example... > start-my-servers.gfsh > > #!/bin/gfsh > > start server --name=Server1 --log-level=config ... > start-server --name=Server2 --port=11235 ... > start-server --name=Server3 ... > ... > start server --name=ServerN > > Then, from within *Gfsh*, you can... > > gfsh>run --file=/path/to/start-my-servers.gfsh > > > File extension of the *Gfsh* shell script file does not matter but, using > .gfsh is descriptive. > > Hope this helps. > > -John > > > > On Sun, Jul 24, 2016 at 3:03 AM, Gal Palmery <gal.palm...@amdocs.com> > wrote: > >> Hi, >> >> >> >> Is there a way to start all the geode servers that are configured in my >> environment simultaneously and not one after the other? >> >> Startup takes a while when there is a large number of servers.. >> >> >> >> Thanks, >> >> Gal >> This message and the information contained herein is proprietary and >> confidential and subject to the Amdocs policy statement, you may review at >> http://www.amdocs.com/email_disclaimer.asp >> > > > > -- > -John > 503-504-8657 > john.blum10101 (skype) > -- -John 503-504-8657 john.blum10101 (skype)
