Hi, I’m afraid not. You would have to wait for one job to finish before starting the next one.
Best, Aljoscha > On 15. Jun 2017, at 20:11, Flavio Pompermaier <[email protected]> wrote: > > Hi Aljoscha, > we're still investigating possible solutions here. Yes, as you correctly said > there are links between data of different keys so we can only proceed with > the next job only once we are sure at 100% that all input data has been > consumed and no other data will be read until this last jobs ends. > There should be some sort of synchronization between these 2 jobs...is that > possible right now in Flink? > > Thanks a lot for the support, > Flavio > > On Thu, Jun 15, 2017 at 12:16 PM, Aljoscha Krettek <[email protected] > <mailto:[email protected]>> wrote: > Hi, > > Trying to revive this somewhat older thread: have you made any progress? I > think going with a ProcessFunction that keeps all your state internally and > periodically outputs to, say, Elasticsearch using a sink seems like the way > to go? You can do the periodic emission using timers in the ProcessFunction. > > In your use case, does the data you would store in the Flink managed state > have links between data of different keys? This sounds like it could be a > problem when it comes to consistency when outputting to an external system. > > Best, > Aljoscha > >> On 17. May 2017, at 14:12, Flavio Pompermaier <[email protected] >> <mailto:[email protected]>> wrote: >> >> Hi to all, >> there are a lot of useful discussion points :) >> >> I'll try to answer to everybody. >> >> @Ankit: >> right now we're using Parquet on HDFS to store thrift objects. Those objects >> are essentially structured like >> key >> alternative_key >> list of tuples (representing the state of my Object) >> This model could be potentially modeled as a Monoid and it's very well >> suited for a stateful streaming computation where updates to a single key >> state are not as expansive as a call to any db to get the current list of >> tuples and update back that list with for an update (IMHO). Maybe here I'm >> overestimating Flink streaming capabilities... >> serialization should be ok using thrift, but Flink advice to use tuples to >> have better performance so just after reading the data from disk (as a >> ThriftObject) we convert them to its equivalent representation as >> Tuple3<String, String, List<Tuple4>> version >> Since I currently use Flink to ingest data that (in the end) means adding >> tuples to my objects, it would be perfect to have an "online" state of the >> grouped tuples in order to: >> add/remove tuples to my object very quickly >> from time to time, scan the whole online data (or a part of it) and >> "translate" it into one ore more JSON indices (and put them into >> Elasticsearch) >> @Fabian: >> You're right that batch processes are bot very well suited to work with >> services that can fail...if in a map function the remote call fails all the >> batch job fails...this should be less problematic with streaming because >> there's checkpointing and with async IO is should be the possibile to add >> some retry/backoff policies in order to not overload remote services like db >> or solr/es indices (maybe it's not already there but it should be possible >> to add). Am I wrong? >> >> @Kostas: >> >> From what I understood Queryable state is usefult for gets...what if I need >> to scan the entire db? For us it could be better do periodically dump the >> state to RocksDb or HDFS but, as I already said, I'm not sure if it is safe >> to start a batch job that reads the dumped data while, in the meantime, a >> possible update of this dump could happen...is there any potential problem >> to data consistency (indeed tuples within grouped objects have references to >> other objects keys)? >> >> Best, >> Flavio >> >> On Wed, May 17, 2017 at 10:18 AM, Kostas Kloudas >> <[email protected] <mailto:[email protected]>> wrote: >> Hi Flavio, >> >> For setting the retries, unfortunately there is no such setting yet and, if >> I am not wrong, in case of a failure of a request, >> an exception will be thrown and the job will restart. I am also including >> Till in the thread as he may know better. >> >> For consistency guarantees and concurrency control, this depends on your >> underlying backend. But if you want to >> have end-to-end control, then you could do as Ankit suggested at his point >> 3), i.e have a single job for the whole pipeline >> (if this fits your needs of course). This will allow you to set your own >> “precedence” rules for your operations. >> >> Now finally, there is no way currently to expose the state of a job to >> another job. The way to do so is either Queryable >> State, or writing to a Sink. If the problem for having one job is that you >> emit one element at a time, you can always group >> elements together and emit downstream less often, in batches. >> >> Finally, if you need 2 jobs, you can always use a hybrid solution where you >> keep your current state in Flink, and you dump it >> to a Sink that is queryable once per week for example. The Sink then can be >> queried at any time, and data will be at most one >> week old. >> >> Thanks, >> Kostas >> >>> On May 17, 2017, at 9:35 AM, Fabian Hueske <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Hi Ankit, just a brief comment on the batch job is easier than streaming >>> job argument. I'm not sure about that. >>> I can see that just the batch job might seem easier to implement, but this >>> is only one part of the whole story. The operational side of using batch is >>> more complex IMO. >>> You need a tool to ingest your stream, you need storage for the ingested >>> data, you need a periodic scheduler to kick of your batch job, and you need >>> to take care of failures if something goes wrong. >>> The streaming case, this is not needed or the framework does it for you. >>> >>> Just my 2 cents, Fabian >>> >>> 2017-05-16 20:58 GMT+02:00 Jain, Ankit <[email protected] >>> <mailto:[email protected]>>: >>> Hi Flavio, >>> >>> While you wait on an update from Kostas, wanted to understand the use-case >>> better and share my thoughts- >>> >>> >>> >>> 1) Why is current batch mode expensive? Where are you persisting the >>> data after updates? Way I see it by moving to Flink, you get to use >>> RocksDB(a key-value store) that makes your lookups faster – probably right >>> now you are using a non-indexed store like S3 maybe? >>> >>> So, gain is coming from moving to a better persistence store suited to your >>> use-case than from batch->streaming. Myabe consider just going with a >>> different data store. >>> >>> IMHO, stream should only be used if you really want to act on the new >>> events in real-time. It is generally harder to get a streaming job correct >>> than a batch one. >>> >>> >>> >>> 2) If current setup is expensive due to serialization-deserialization >>> then that should be fixed by moving to a faster format (maybe AVRO? - I >>> don’t have a lot of expertise in that). I don’t see how that problem will >>> go away with Flink – so still need to handle serialization. >>> >>> >>> >>> 3) Even if you do decide to move to Flink – I think you can do this >>> with one job, two jobs are not needed. At every incoming event, check the >>> previous state and update/output to kafka or whatever data store you are >>> using. >>> >>> >>> >>> >>> >>> Thanks >>> >>> Ankit >>> >>> >>> >>> From: Flavio Pompermaier <[email protected] >>> <mailto:[email protected]>> >>> Date: Tuesday, May 16, 2017 at 9:31 AM >>> To: Kostas Kloudas <[email protected] >>> <mailto:[email protected]>> >>> Cc: user <[email protected] <mailto:[email protected]>> >>> Subject: Re: Stateful streaming question >>> >>> >>> >>> Hi Kostas, >>> >>> thanks for your quick response. >>> >>> I also thought about using Async IO, I just need to figure out how to >>> correctly handle parallelism and number of async requests. >>> >>> However that's probably the way to go..is it possible also to set a number >>> of retry attempts/backoff when the async request fails (maybe due to a too >>> busy server)? >>> >>> >>> >>> For the second part I think it's ok to persist the state into RocksDB or >>> HDFS, my question is indeed about that: is it safe to start reading (with >>> another Flink job) from RocksDB or HDFS having an updatable state "pending" >>> on it? Should I ensure that state updates are not possible until the other >>> Flink job hasn't finish to read the persisted data? >>> >>> >>> >>> And another question...I've tried to draft such a processand basically I >>> have the following code: >>> >>> >>> >>> DataStream<MyGroupedObj> groupedObj = tuples.keyBy(0) >>> >>> .flatMap(new RichFlatMapFunction<Tuple4, MyGroupedObj>() { >>> >>> >>> >>> private transient ValueState<MyGroupedObj> state; >>> >>> >>> >>> @Override >>> >>> public void flatMap(Tuple4 t, Collector<MyGroupedObj> out) throws >>> Exception { >>> >>> MyGroupedObj current = state.value(); >>> >>> if (current == null) { >>> >>> current = new MyGroupedObj(); >>> >>> } >>> >>> .... >>> >>> current.addTuple(t); >>> >>> ... >>> >>> state.update(current); >>> >>> out.collect(current); >>> >>> } >>> >>> >>> >>> @Override >>> >>> public void open(Configuration config) { >>> >>> ValueStateDescriptor<MyGroupedObj> descriptor = >>> >>> new ValueStateDescriptor<>( >>> "test",TypeInformation.of(MyGroupedObj.class)); >>> >>> state = getRuntimeContext().getState(descriptor); >>> >>> } >>> >>> }); >>> >>> groupedObj.print(); >>> >>> >>> >>> but obviously this way I emit the updated object on every update while, >>> actually, I just want to persist the ValueState somehow (and make it >>> available to another job that runs one/moth for example). Is that possible? >>> >>> >>> >>> >>> >>> On Tue, May 16, 2017 at 5:57 PM, Kostas Kloudas >>> <[email protected] <mailto:[email protected]>> wrote: >>> >>> Hi Flavio, >>> >>> >>> >>> From what I understand, for the first part you are correct. You can use >>> Flink’s internal state to keep your enriched data. >>> >>> In fact, if you are also querying an external system to enrich your data, >>> it is worth looking at the AsyncIO feature: >>> >>> >>> >>> https://ci.apache.org/projects/flink/flink-docs-release-1.2/dev/stream/asyncio.html >>> >>> <https://ci.apache.org/projects/flink/flink-docs-release-1.2/dev/stream/asyncio.html> >>> >>> >>> Now for the second part, currently in Flink you cannot iterate over all >>> registered keys for which you have state. A pointer >>> >>> to look at the may be useful is the queryable state: >>> >>> >>> >>> https://ci.apache.org/projects/flink/flink-docs-release-1.2/dev/stream/queryable_state.html >>> >>> <https://ci.apache.org/projects/flink/flink-docs-release-1.2/dev/stream/queryable_state.html> >>> >>> >>> This is still an experimental feature, but let us know your opinion if you >>> use it. >>> >>> >>> >>> Finally, an alternative would be to keep state in Flink, and periodically >>> flush it to an external storage system, which you can >>> >>> query at will. >>> >>> >>> >>> Thanks, >>> >>> Kostas >>> >>> >>> >>> >>> >>> On May 16, 2017, at 4:38 PM, Flavio Pompermaier <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> >>> >>> Hi to all, >>> >>> we're still playing with Flink streaming part in order to see whether it >>> can improve our current batch pipeline. >>> >>> At the moment, we have a job that translate incoming data (as Row) into >>> Tuple4, groups them together by the first field and persist the result to >>> disk (using a thrift object). When we need to add tuples to those grouped >>> objects we need to read again the persisted data, flat it back to Tuple4, >>> union with the new tuples, re-group by key and finally persist. >>> >>> >>> >>> This is very expansive to do with batch computation while is should pretty >>> straightforward to do with streaming (from what I understood): I just need >>> to use ListState. Right? >>> >>> Then, let's say I need to scan all the data of the stateful computation >>> (key and values), in order to do some other computation, I'd like to know: >>> >>> how to do that? I.e. create a DataSet/DataSource<Key,Value> from the >>> stateful data in the stream >>> is there any problem to access the stateful data without stopping incoming >>> data (and thus possible updates to the states)? >>> Thanks in advance for the support, >>> >>> Flavio >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> -- >>> >>> Flavio Pompermaier >>> Development Department >>> >>> OKKAM S.r.l. >>> Tel. +(39) 0461 1823908 <tel:+39%200461%20182%203908> >> >> > >
