Hi Robert,
I tried several paths and rmr before.
It stopped after 1-2 minutes. There was an exception on the shell.
Sorry, should have attached to the last mail.
Thanks,
Konstnatin
On 05.04.2016 11:22, Robert Metzger wrote:
> I've tried reproducing the issue on a test cluster, but everything
> worked fine.
>
> Have you tried different values for "recovery.zookeeper.path.root" or
> only one? Maybe the path you've put contains invalid data?
>
> Regarding the client log you've send: Did you manually stop the client
> or did it stop after a few minutes?
> The JobManager stops after a few minutes because the client requested a
> shutdown. Usually, the client only shuts down on an exception or when
> the user stops the yarn session.
> There is no exception in the client log. Was there an exception printed
> to the shell?
>
> This log message:
>
> 2016-04-05 08:48:34,912 DEBUG org.apache.flink.yarn.FlinkYarnCluster
> - Received message option None
>
> Should not be an issue.
>
>
> On Tue, Apr 5, 2016 at 10:14 AM, Ufuk Celebi <[email protected]
> <mailto:[email protected]>> wrote:
>
> Hey Konstantin,
>
> just looked at the logs and the cluster is started, but the job is
> indeed never submitted.
>
> I've forwarded this to Robert, because he is familiar with the YARN
> client. I will look into how the client interacts with the ZooKeeper
> root path.
>
> – Ufuk
>
>
> On Tue, Apr 5, 2016 at 9:18 AM, Konstantin Knauf
> <[email protected] <mailto:[email protected]>>
> wrote:
> > Hi Ufuk, Hi Stephan,
> >
> > sorry for the late response Attached the client logs.
> >
> > Cheers,
> >
> > Konstantin
> >
> > On 04.04.2016 21 <tel:04.04.2016%2021>:20, Stephan Ewen wrote:
> >> This seems to the the critical part in the logs:
> >>
> >> 2016-03-31 09:01:52,234 INFO org.apache.flink.yarn.YarnJobManager
> >> - Re-submitting 0 job graphs.
> >> 2016-03-31 09:02:51,182 INFO org.apache.flink.yarn.YarnJobManager
> >> - Stopping YARN JobManager with status FAILED and
> >> diagnostic Flink YARN Client requested shutdown.
> >>
> >> The YarnJobManager starts up properly, but the Client never sends
> >> anything, shuts down at some point, and tears down the YARN cluster.
> >>
> >> Client logs would help a lot there...
> >>
> >>
> >>
> >>
> >> On Sat, Apr 2, 2016 at 12:43 PM, Ufuk Celebi <[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected] <mailto:[email protected]>>> wrote:
> >>
> >> Hey Konstantin,
> >>
> >> That's weird. Can you please log the client output on DEBUG
> level and
> >> provide that as well? I'm wondering whether the client uses a
> >> different root path.
> >>
> >> The following seems to happen:
> >> - you use ledf_recovery as the root namespace
> >> - the task managers are connecting (they resolve the JM
> address via
> >> ZooKeeper in this case as well, which means they correctly
> use the
> >> same namespace)
> >> - but the client, which started the YARN session, does not
> ever submit
> >> the job to the cluster.
> >>
> >> – Ufuk
> >>
> >> On Thu, Mar 31, 2016 at 9:23 AM, Konstantin Knauf
> >> <[email protected]
> <mailto:[email protected]>
> <mailto:[email protected]
> <mailto:[email protected]>>>
> >> wrote:
> >> > Hi everyone,
> >> >
> >> > we are running in some problems with multiple per-job yarn
> >> sessions, too.
> >> >
> >> > When we are are starting a per-job yarn session (Flink 1.0,
> Hadoop
> >> 2.4)
> >> > with recovery.zookeeper.path.root other than /flink, the
> yarn session
> >> > starts but no job is submitted, and after 1 min or so the
> session
> >> > crashes. I attached the jobmanager log.
> >> >
> >> > In Zookeeper the root-directory is created and child-nodes
> >> >
> >> > leaderlatch
> >> > jobgraphs
> >> >
> >> > /flink does also exist, but does not have child nodes.
> >> >
> >> > Everything runs fine, with the default
> recovery.zookeeper.root.path.
> >> >
> >> > Does anyone have an idea, what is going on?
> >> >
> >> > Cheers,
> >> >
> >> > Konstnatin
> >> >
> >> >
> >> > On 23.11.2015 17:00, Gwenhael Pasquiers wrote:
> >> >> We are not yet using HA in our cluster instances.
> >> >>
> >> >> But yes, we will have to change the zookeeper.path.root J
> >> >>
> >> >>
> >> >>
> >> >> We package our jobs with their own config folder (we don’t
> rely on
> >> >> flink’s config folder); we can put the maven project name
> into this
> >> >> property then they will have different values J
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> *From:*Till Rohrmann [mailto:[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected] <mailto:[email protected]>>]
> >> >> *Sent:* lundi 23 novembre 2015 14:51
> >> >> *To:* [email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
> >> >> *Subject:* Re: YARN High Availability
> >> >>
> >> >>
> >> >>
> >> >> The problem is the execution graph handle which is stored in
> >> ZooKeeper.
> >> >> You can manually remove it via the ZooKeeper shell by
> simply deleting
> >> >> everything below your `recovery.zookeeper.path.root`
> ZNode. But you
> >> >> should be sure that the cluster has been stopped before.
> >> >>
> >> >>
> >> >>
> >> >> Do you start the different clusters with different
> >> >> `recovery.zookeeper.path.root` values? If not, then you should
> >> run into
> >> >> troubles when running multiple clusters at the same time. The
> >> reason is
> >> >> that then all clusters will think that they belong together.
> >> >>
> >> >>
> >> >>
> >> >> Cheers,
> >> >>
> >> >> Till
> >> >>
> >> >>
> >> >>
> >> >> On Mon, Nov 23, 2015 at 2:15 PM, Gwenhael Pasquiers
> >> >> <[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected]
> <mailto:[email protected]>>
> >> >> <mailto:[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected]
> <mailto:[email protected]>>>> wrote:
> >> >>
> >> >> OK, I understand.
> >> >>
> >> >> Maybe we are not really using flink as you intended. The
> way we are
> >> >> using it, one cluster equals one job. That way we are sure
> to isolate
> >> >> the different jobs as much as possible and in case of
> crashes /
> >> bugs /
> >> >> (etc) can completely kill one cluster without interfering with
> >> the other
> >> >> jobs.
> >> >>
> >> >> That future behavior seems good :-)
> >> >>
> >> >> Instead of the manual flink commands, is there to manually
> delete
> >> those
> >> >> old jobs before launching my job ? They probably are
> somewhere in
> >> hdfs,
> >> >> aren't they ?
> >> >>
> >> >> B.R.
> >> >>
> >> >>
> >> >>
> >> >> -----Original Message-----
> >> >> From: Ufuk Celebi [mailto:[email protected]
> <mailto:[email protected]> <mailto:[email protected] <mailto:[email protected]>>
> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>]
> >> >> Sent: lundi 23 novembre 2015 12:12
> >> >> To: [email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>
> >> >> Subject: Re: YARN High Availability
> >> >>
> >> >> Hey Gwenhaël,
> >> >>
> >> >> the restarting jobs are most likely old job submissions.
> They are not
> >> >> cleaned up when you shut down the cluster, but only when
> they finish
> >> >> (either regular finish or after cancelling).
> >> >>
> >> >> The workaround is to use the command line frontend:
> >> >>
> >> >> bin/flink cancel JOBID
> >> >>
> >> >> for each RESTARTING job. Sorry about the inconvenience!
> >> >>
> >> >> We are in an active discussion about addressing this. The
> future
> >> >> behaviour will be that the startup or shutdown of a
> cluster cleans up
> >> >> everything and an option to skip this step.
> >> >>
> >> >> The reasoning for the initial solution (not removing
> anything) was to
> >> >> make sure that no jobs are deleted by accident. But it
> looks like
> >> this
> >> >> is more confusing than helpful.
> >> >>
> >> >> – Ufuk
> >> >>
> >> >>> On 23 Nov 2015, at 11:45, Gwenhael Pasquiers
> >> >> <[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected]
> <mailto:[email protected]>>
> >> >> <mailto:[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected]
> <mailto:[email protected]>>>> wrote:
> >> >>>
> >> >>> Hi again !
> >> >>>
> >> >>> On the same topic I'm still trying to start my streaming job
> >> with HA.
> >> >>> The HA part seems to be more or less OK (I killed the
> JobManager and
> >> >> it came back), however I have an issue with the TaskManagers.
> >> >>> I configured my job to have only one TaskManager and 1
> slot that
> >> does
> >> >> [source=>map=>sink].
> >> >>> The issue I'm encountering is that other instances of my
> job appear
> >> >> and are in the RESTARTING status since there is only one
> task slot.
> >> >>>
> >> >>> Do you know of this, or have an idea of where to look in
> order to
> >> >> understand what's happening ?
> >> >>>
> >> >>> B.R.
> >> >>>
> >> >>> Gwenhaël PASQUIERS
> >> >>>
> >> >>> -----Original Message-----
> >> >>> From: Maximilian Michels [mailto:[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected] <mailto:[email protected]>>
> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>]
> >> >>> Sent: jeudi 19 novembre 2015 13:36
> >> >>> To: [email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>
> >> >>> Subject: Re: YARN High Availability
> >> >>>
> >> >>> The docs have been updated.
> >> >>>
> >> >>> On Thu, Nov 19, 2015 at 12:36 PM, Ufuk Celebi
> <[email protected] <mailto:[email protected]>
> >> <mailto:[email protected] <mailto:[email protected]>>
> >> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>> wrote:
> >> >>>> I’ve added a note about this to the docs and asked Max
> to trigger a
> >> >> new build of them.
> >> >>>>
> >> >>>> Regarding Aljoscha’s idea: I like it. It is essentially
> a shortcut
> >> >> for configuring the root path.
> >> >>>>
> >> >>>> In any case, it is orthogonal to Till’s proposals. That
> one we need
> >> >> to address as well (see FLINK-2929). The motivation for
> the current
> >> >> behaviour was to be rather defensive when removing state
> in order
> >> to not
> >> >> loose data accidentally. But it can be confusing, indeed.
> >> >>>>
> >> >>>> – Ufuk
> >> >>>>
> >> >>>>> On 19 Nov 2015, at 12:08, Till Rohrmann
> <[email protected] <mailto:[email protected]>
> >> <mailto:[email protected] <mailto:[email protected]>>
> >> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>> wrote:
> >> >>>>>
> >> >>>>> You mean an additional start-up parameter for the
> >> `start-cluster.sh`
> >> >> script for the HA case? That could work.
> >> >>>>>
> >> >>>>> On Thu, Nov 19, 2015 at 11:54 AM, Aljoscha Krettek
> >> >> <[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>> wrote:
> >> >>>>> Maybe we could add a user parameter to specify a
> cluster name that
> >> >> is used to make the paths unique.
> >> >>>>>
> >> >>>>>
> >> >>>>> On Thu, Nov 19, 2015, 11:24 Till Rohrmann
> >> <[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
> >> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>> wrote:
> >> >>>>> I agree that this would make the configuration easier.
> However, it
> >> >> entails also that the user has to retrieve the randomized path
> >> from the
> >> >> logs if he wants to restart jobs after the cluster has
> crashed or
> >> >> intentionally restarted. Furthermore, the system won't be
> able to
> >> clean
> >> >> up old checkpoint and job handles in case that the cluster
> stop was
> >> >> intentional.
> >> >>>>>
> >> >>>>> Thus, the question is how do we define the behaviour in
> order to
> >> >> retrieve handles and to clean up old handles so that ZooKeeper
> >> won't be
> >> >> cluttered with old handles?
> >> >>>>>
> >> >>>>> There are basically two modes:
> >> >>>>>
> >> >>>>> 1. Keep state handles when shutting down the cluster.
> Provide
> >> a mean
> >> >> to define a fixed path when starting the cluster and also
> a mean to
> >> >> purge old state handles. Furthermore, add a shutdown mode
> where the
> >> >> handles under the current path are directly removed. This
> mode would
> >> >> guarantee to always have the state handles available if not
> >> explicitly
> >> >> told differently. However, the downside is that ZooKeeper
> will be
> >> >> cluttered most certainly.
> >> >>>>>
> >> >>>>> 2. Remove the state handles when shutting down the cluster.
> >> Provide
> >> >> a shutdown mode where we keep the state handles. This will
> keep
> >> >> ZooKeeper clean but will give you also the possibility to
> keep a
> >> >> checkpoint around if necessary. However, the user is more
> likely
> >> to lose
> >> >> his state when shutting down the cluster.
> >> >>>>>
> >> >>>>> On Thu, Nov 19, 2015 at 10:55 AM, Robert Metzger
> >> >> <[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>> wrote:
> >> >>>>> I agree with Aljoscha. Many companies install Flink
> (and its
> >> config)
> >> >> in a central directory and users share that installation.
> >> >>>>>
> >> >>>>> On Thu, Nov 19, 2015 at 10:45 AM, Aljoscha Krettek
> >> >> <[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>
> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>> wrote:
> >> >>>>> I think we should find a way to randomize the paths
> where the HA
> >> >> stuff stores data. If users don’t realize that they store
> data in the
> >> >> same paths this could lead to problems.
> >> >>>>>
> >> >>>>>> On 19 Nov 2015, at 08:50, Till Rohrmann
> <[email protected] <mailto:[email protected]>
> >> <mailto:[email protected] <mailto:[email protected]>>
> >> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>> wrote:
> >> >>>>>>
> >> >>>>>> Hi Gwenhaël,
> >> >>>>>>
> >> >>>>>> good to hear that you could resolve the problem.
> >> >>>>>>
> >> >>>>>> When you run multiple HA flink jobs in the same
> cluster, then you
> >> >> don’t have to adjust the configuration of Flink. It should
> work
> >> out of
> >> >> the box.
> >> >>>>>>
> >> >>>>>> However, if you run multiple HA Flink cluster, then
> you have
> >> to set
> >> >> for each cluster a distinct ZooKeeper root path via the option
> >> >> recovery.zookeeper.path.root in the Flink configuraiton.
> This is
> >> >> necessary because otherwise all JobManagers (the ones of the
> >> different
> >> >> clusters) will compete for a single leadership.
> Furthermore, all
> >> >> TaskManagers will only see the one and only leader and
> connect to it.
> >> >> The reason is that the TaskManagers will look up their
> leader at
> >> a ZNode
> >> >> below the ZooKeeper root path.
> >> >>>>>>
> >> >>>>>> If you have other questions then don’t hesitate asking me.
> >> >>>>>>
> >> >>>>>> Cheers,
> >> >>>>>> Till
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> On Wed, Nov 18, 2015 at 6:37 PM, Gwenhael Pasquiers
> >> >> <[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected]
> <mailto:[email protected]>>
> >> >> <mailto:[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected]
> <mailto:[email protected]>>>> wrote:
> >> >>>>>> Nevermind,
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> Looking at the logs I saw that it was having issues
> trying to
> >> >> connect to ZK.
> >> >>>>>>
> >> >>>>>> To make I short is had the wrong port.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> It is now starting.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> Tomorrow I’ll try to kill some JobManagers *evil*.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> Another question : if I have multiple HA flink jobs, are
> >> there some
> >> >> points to check in order to be sure that they won’t collide on
> >> hdfs or ZK ?
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> B.R.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> Gwenhaël PASQUIERS
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> From: Till Rohrmann [mailto:[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected] <mailto:[email protected]>>
> >> >> <mailto:[email protected]
> <mailto:[email protected]> <mailto:[email protected]
> <mailto:[email protected]>>>]
> >> >>>>>> Sent: mercredi 18 novembre 2015 18:01
> >> >>>>>> To: [email protected]
> <mailto:[email protected]> <mailto:[email protected]
> <mailto:[email protected]>>
> >> <mailto:[email protected] <mailto:[email protected]>
> <mailto:[email protected] <mailto:[email protected]>>>
> >> >>>>>> Subject: Re: YARN High Availability
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> Hi Gwenhaël,
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> do you have access to the yarn logs?
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> Cheers,
> >> >>>>>>
> >> >>>>>> Till
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> On Wed, Nov 18, 2015 at 5:55 PM, Gwenhael Pasquiers
> >> >> <[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected]
> <mailto:[email protected]>>
> >> >> <mailto:[email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected]
> <mailto:[email protected]>>>> wrote:
> >> >>>>>>
> >> >>>>>> Hello,
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> We’re trying to set up high availability using an existing
> >> >> zookeeper quorum already running in our Cloudera cluster.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> So, as per the doc we’ve changed the max attempt in
> yarn’s config
> >> >> as well as the flink.yaml.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> recovery.mode: zookeeper
> >> >>>>>>
> >> >>>>>> recovery.zookeeper.quorum:
> host1:3181,host2:3181,host3:3181
> >> >>>>>>
> >> >>>>>> state.backend: filesystem
> >> >>>>>>
> >> >>>>>> state.backend.fs.checkpointdir: hdfs:///flink/checkpoints
> >> >>>>>>
> >> >>>>>> recovery.zookeeper.storageDir: hdfs:///flink/recovery/
> >> >>>>>>
> >> >>>>>> yarn.application-attempts: 1000
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> Everything is ok as long as recovery.mode is commented.
> >> >>>>>>
> >> >>>>>> As soon as I uncomment recovery.mode the deployment on
> yarn is
> >> >> stuck on :
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> “Deploying cluster, current state ACCEPTED”.
> >> >>>>>>
> >> >>>>>> “Deployment took more than 60 seconds….”
> >> >>>>>>
> >> >>>>>> Every second.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> And I have more than enough resources available on my yarn
> >> cluster.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> Do you have any idea of what could cause this, and/or
> what logs I
> >> >> should look for in order to understand ?
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> B.R.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> Gwenhaël PASQUIERS
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>
> >> >>> <unwanted_jobs.jpg>
> >> >>
> >> >>
> >> >>
> >> >
> >> > --
> >> > Konstantin Knauf * [email protected]
> <mailto:[email protected]>
> >> <mailto:[email protected]
> <mailto:[email protected]>> * +49-174-3413182
> <tel:%2B49-174-3413182>
> >> <tel:%2B49-174-3413182>
> >> > TNG Technology Consulting GmbH, Betastr. 13a, 85774
> Unterföhring
> >> > Geschäftsführer: Henrik Klagges, Christoph Stock, Dr.
> Robert Dahlke
> >> > Sitz: Unterföhring * Amtsgericht München * HRB 135082
> >>
> >>
> >
> > --
> > Konstantin Knauf * [email protected]
> <mailto:[email protected]> * +49-174-3413182
> <tel:%2B49-174-3413182>
> > TNG Technology Consulting GmbH, Betastr. 13a, 85774 Unterföhring
> > Geschäftsführer: Henrik Klagges, Christoph Stock, Dr. Robert Dahlke
> > Sitz: Unterföhring * Amtsgericht München * HRB 135082
>
>
--
Konstantin Knauf * [email protected] * +49-174-3413182
TNG Technology Consulting GmbH, Betastr. 13a, 85774 Unterföhring
Geschäftsführer: Henrik Klagges, Christoph Stock, Dr. Robert Dahlke
Sitz: Unterföhring * Amtsgericht München * HRB 135082
org.apache.flink.client.program.ProgramInvocationException: The program
execution failed: Communication with JobManager failed: Lost connection to the
JobManager.
at org.apache.flink.client.program.Client.runBlocking(Client.java:381)
at org.apache.flink.client.program.Client.runBlocking(Client.java:355)
at
org.apache.flink.streaming.api.environment.StreamContextEnvironment.execute(StreamContextEnvironment.java:65)
at
de.telefonica.anonymization.edf.EventDataFilter.start(EventDataFilter.java:77)
at
de.telefonica.anonymization.ledf.LedfStarter.main(LedfStarter.java:15)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at
org.apache.flink.client.program.PackagedProgram.callMainMethod(PackagedProgram.java:505)
at
org.apache.flink.client.program.PackagedProgram.invokeInteractiveModeForExecution(PackagedProgram.java:403)
at org.apache.flink.client.program.Client.runBlocking(Client.java:248)
at
org.apache.flink.client.CliFrontend.executeProgramBlocking(CliFrontend.java:866)
at org.apache.flink.client.CliFrontend.run(CliFrontend.java:333)
at
org.apache.flink.client.CliFrontend.parseParameters(CliFrontend.java:1189)
at org.apache.flink.client.CliFrontend.main(CliFrontend.java:1239)
Caused by: org.apache.flink.runtime.client.JobExecutionException: Communication
with JobManager failed: Lost connection to the JobManager.
at
org.apache.flink.runtime.client.JobClient.submitJobAndWait(JobClient.java:140)
at org.apache.flink.client.program.Client.runBlocking(Client.java:379)
... 15 more
Caused by:
org.apache.flink.runtime.client.JobClientActorConnectionTimeoutException: Lost
connection to the JobManager.
at
org.apache.flink.runtime.client.JobClientActor.handleMessage(JobClientActor.java:244)
at
org.apache.flink.runtime.akka.FlinkUntypedActor.handleLeaderSessionID(FlinkUntypedActor.java:88)
at
org.apache.flink.runtime.akka.FlinkUntypedActor.onReceive(FlinkUntypedActor.java:62)
at
akka.actor.UntypedActor$$anonfun$receive$1.applyOrElse(UntypedActor.scala:167)
at akka.actor.Actor$class.aroundReceive(Actor.scala:465)
at akka.actor.UntypedActor.aroundReceive(UntypedActor.scala:97)
at akka.actor.ActorCell.receiveMessage(ActorCell.scala:516)
at akka.actor.ActorCell.invoke(ActorCell.scala:487)
at akka.dispatch.Mailbox.processMailbox(Mailbox.scala:254)
at akka.dispatch.Mailbox.run(Mailbox.scala:221)
at akka.dispatch.Mailbox.exec(Mailbox.scala:231)
at scala.concurrent.forkjoin.ForkJoinTask.doExec(ForkJoinTask.java:260)
at
scala.concurrent.forkjoin.ForkJoinPool$WorkQueue.pollAndExecAll(ForkJoinPool.java:1253)
at
scala.concurrent.forkjoin.ForkJoinPool$WorkQueue.runTask(ForkJoinPool.java:1346)
at
scala.concurrent.forkjoin.ForkJoinPool.runWorker(ForkJoinPool.java:1979)
at
scala.concurrent.forkjoin.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:107