Here is output from cfstats: http://pastebin.com/W4FVd4RW
The keyspace was created as described in https://github.com/cloudius-systems/osv/wiki/Benchmarking-Cassandra-and-other-NoSQL-databases-with-YCSB Data was loaded by using ycsb. Cheers On Wed, Feb 10, 2016 at 12:26 PM, Jack Krupansky <jack.krupan...@gmail.com> wrote: > Sorry, I didn't realize you were still living in the stone age with DSE - > and Cassandra 2.1. Chnage "table" to "cf" (column family.) > > -- Jack Krupansky > > On Wed, Feb 10, 2016 at 3:23 PM, Ted Yu <yuzhih...@gmail.com> wrote: > >> I don't see tablestats sub-command: >> >> http://pastebin.com/XwwCAqh4 >> >> This is DSE 4.8.4 >> >> Cheers >> >> On Wed, Feb 10, 2016 at 12:05 PM, Jack Krupansky < >> jack.krupan...@gmail.com> wrote: >> >>> What do your partition and cluster keys look like? >>> >>> Check a nodetool tablestats to see number of partition keys on the >>> nodes. Also check nodetool tablehistograms to see if you have a lot of >>> too-wide rows due to the balance of data between the partition key and >>> clustering columns. >>> >>> -- Jack Krupansky >>> >>> On Wed, Feb 10, 2016 at 2:54 PM, Ted Yu <yuzhih...@gmail.com> wrote: >>> >>>> Hi, >>>> I am following this guide on a 5 node cluster: >>>> >>>> https://github.com/cloudius-systems/osv/wiki/Benchmarking-Cassandra-and-other-NoSQL-databases-with-YCSB >>>> >>>> I am using ycsb-0.5.0 >>>> >>>> I found that some node receives above average writes, leading to disk >>>> full condition. >>>> >>>> I want to get some suggestion on how the load can be better distributed. >>>> >>>> Thanks >>>> >>> >>> >> >
