1) There are ways to connect two VPCs using VPN. 2) About the connectivity using public IP. Can you ping the one public ip from another one in a different region. If ping works, please check port connectivity using telnet. You can start a temp server on a port using netcat. If connectivity fails, you need to looks into your routing tables to allow connectivity on the public ip addresses.
On Tue, Aug 11, 2015 at 7:51 PM, Asher Newcomer <asher...@gmail.com> wrote: > X-post w/ SO: link > <https://stackoverflow.com/questions/31949043/cassandra-change-from-single-region-ec2-to-multi-region> > > I have (had) a working 4 node Cassandra cluster setup in an EC2 VPC. Setup > was as follows: > > 172.18.100.110 - seed - DC1 / RAC1 > > 172.18.100.111 - DC1 / RAC1 > > 172.18.100.112 - seed - DC1 / RAC2 > > 172.18.100.113 - DC1 / RAC2 > > All of the above nodes are in East-1D, and I have configured it using the > GossipingPropertyFileSnitch (I would rather not use the EC2 specific > snitches). > > listen_address & broadcast_address were both set to the node's private IP. > > I then wanted to expand the cluster into a new region (us-west). Because > cross-region private IP communication is not supported in EC2, I attempted > to change the settings to have the nodes communicate through their public > IPs. > > listen_address remained set to private IP > broadcast_address was changed to the public IP > seeds_list IPs were changed to the appropriate public IPs > > I restarted the nodes one by one expecting them to simply 'work', but now > they only see themselves and not the other nodes. > > nodetool status consistently returns: > > Datacenter: DC1 > =============== > Status=Up/Down > |/ State=Normal/Leaving/Joining/Moving > -- Address Load Tokens Owns Host ID Rack > DN 172.18.100.112 ? 256 ? 968aaa8a-32b7-4493-9747-3df1c3784164 r1 > DN 172.18.100.113 ? 256 ? 8e03643c-9db8-4906-aabc-0a8f4f5c087d r1 > UN [public IP of local node] 75.91 GB 256 ? > 6fdcc85d-6c78-46f2-b41f-abfe1c86ac69 RAC1 > DN 172.18.100.110 ? 256 ? fb7b78a8-d1cc-46fe-ab18-f0d3075cb426 r1 > > On each individual node, the other nodes seem 'stuck' using the private IP > addresses. > > *How do I force the nodes to look for each other at their public > addresses?* > > I have fully opened the EC2 security group/firewall as a test to rule out > any problems there - and it hasn't helped. > > Any ideas most appreciated. >
