>
> You probably generated the wrong token type. Look for a murmur token
> generator on the Datastax site.
What Colin is saying is that the tool you used to create the token, is not
> creating tokens usable for the Murmur3Partitioner. That tool is probably
> generating tokens for the (original) RandomPartitioner, which has a
> different range.
Thanks guys for your input. And I apologize for reading Colin's initial
response too quickly which lets me know that I was probably using the wrong
token generator for the wrong partition type. That of course was the case.
So what I've done is use this token generator form the datastax website:
python -c 'print [str(((2**64 / number_of_tokens) * i) - 2**63) for i
in range(number_of_tokens)]
That algorithm generated a token I could use to start Cassandra on my
second node.
However at this stage I have both nodes running and I believe their
gossiping if I understand what I see here correctly:
INFO 02:44:13,823 No gossip backlog; proceeding
However I've setup web pages for each of the two web servers that are
running Cassandra. And it looks like the seed node with all the data
is rendering correctly. But the node that's downstream from the seed
node is not receiving any of its data despite the message that I've
just shown you.
And if I go to the seed node and do a describe keyspaces I see the
keyspace that drives the website listed. It's called 'joke_fire1'
cqlsh> describe keyspaces;
system joke_fire1 system_traces
And if I go to the node that's downstream from the seed node and run
the same command:
cqlsh> describe keyspaces;
system system_traces
I don't see the important keyspace that runs the site.
I have the seed node's IP listed in 'seeds' in the cassandra.yaml on
the downstream node. So I'm not really sure why its' not receiving the
seed's data. If there's some command I need to run to flush the system
or something like that.
And if I do a nodetool ring command on the first (seed) host I don't
see the IP of the downstream node listed:
[root@beta-new:~] #nodetool ring | head -10
Note: Ownership information does not include topology; for complete
information, specify a keyspace
Datacenter: datacenter1
==========
Address Rack Status State Load Owns
Token
10.10.1.94 rack1 Up Normal 150.64 KB 100.00%
-9173731940639284976
10.10.1.94 rack1 Up Normal 150.64 KB 100.00%
-9070607847117718988
10.10.1.94 rack1 k Up Normal 150.64 KB 100.00%
-9060190512633067546
10.10.1.94 rack1 Up Normal 150.64 KB 100.00%
-8935690644016753923
And if I look on the downstream node and run nodetool ring I see only
the IP of the downstream node and not the seed listed:
[root@beta:/var/lib/cassandra] #nodetool ring | head -15
Datacenter: datacenter1
==========
Address Rack Status State Load Owns
Token
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-9223372036854775808
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-9151314442816847873
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-9079256848778919937
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-9007199254740992001
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-8935141660703064065
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-8863084066665136129
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-8791026472627208193
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-8718968878589280257
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-8646911284551352321
10.10.1.98 rack1 Up Normal 91.06 KB 99.99%
-8574853690513424385
Yet in my seeds entry in cassandra.yaml I have the correct IP of my
seed node listed:
seed_provider:
- class_name: org.apache.cassandra.locator.SimpleSeedProvider
# seeds is actually a comma-delimited list of addresses.
- seeds: "10.10.1.94"
So I'm just wondering what I'm missing in trying to get these two
nodes to communicate via gossip at this point.
Thanks!
Tim
On Sat, May 17, 2014 at 8:54 PM, Dave Brosius <dbros...@mebigfatguy.com>wrote:
> What Colin is saying is that the tool you used to create the token, is
> not creating tokens usable for the Murmur3Partitioner. That tool is
> probably generating tokens for the (original) RandomPartitioner, which has
> a different range.
>
>
>
> On 05/17/2014 07:20 PM, Tim Dunphy wrote:
>
> Hi and thanks for your response.
>
> The puzzling thing is that yes I am using the murmur partition, yet I am
> still getting the error I just told you guys about:
>
> [root@beta:/etc/alternatives/cassandrahome] #grep -i partition
> conf/cassandra.yaml | grep -v '#'
> partitioner: org.apache.cassandra.dht.Murmur3Partitioner
>
> Thanks
> Tim
>
>
> On Sat, May 17, 2014 at 3:23 PM, Colin <colpcl...@gmail.com> wrote:
>
>> You may have used the old random partitioner token generator. Use the
>> murmur partitioner token generator instead.
>>
>> --
>> Colin
>> 320-221-9531
>>
>>
>> On May 17, 2014, at 1:15 PM, Tim Dunphy <bluethu...@gmail.com> wrote:
>>
>> Hey all,
>>
>> I've set my initial_token in cassandra 2.0.7 using a python script I
>> found at the datastax wiki.
>>
>> I've set the value like this:
>>
>> initial_token: 85070591730234615865843651857942052864
>>
>> And cassandra crashes when I try to start it:
>>
>> [root@beta:/etc/alternatives/cassandrahome] #./bin/cassandra -f
>> INFO 18:14:38,511 Logging initialized
>> INFO 18:14:38,560 Loading settings from
>> file:/usr/local/apache-cassandra-2.0.7/conf/cassandra.yaml
>> INFO 18:14:39,151 Data files directories: [/var/lib/cassandra/data]
>> INFO 18:14:39,152 Commit log directory: /var/lib/cassandra/commitlog
>> INFO 18:14:39,153 DiskAccessMode 'auto' determined to be mmap,
>> indexAccessMode is mmap
>> INFO 18:14:39,153 disk_failure_policy is stop
>> INFO 18:14:39,153 commit_failure_policy is stop
>> INFO 18:14:39,161 Global memtable threshold is enabled at 251MB
>> INFO 18:14:39,362 Not using multi-threaded compaction
>> ERROR 18:14:39,365 Fatal configuration error
>> org.apache.cassandra.exceptions.ConfigurationException: For input string:
>> "85070591730234615865843651857942052864"
>> at
>> org.apache.cassandra.dht.Murmur3Partitioner$1.validate(Murmur3Partitioner.java:178)
>> at
>> org.apache.cassandra.config.DatabaseDescriptor.applyConfig(DatabaseDescriptor.java:440)
>> at
>> org.apache.cassandra.config.DatabaseDescriptor.<clinit>(DatabaseDescriptor.java:111)
>> at
>> org.apache.cassandra.service.CassandraDaemon.setup(CassandraDaemon.java:153)
>> at
>> org.apache.cassandra.service.CassandraDaemon.activate(CassandraDaemon.java:471)
>> at
>> org.apache.cassandra.service.CassandraDaemon.main(CassandraDaemon.java:560)
>> For input string: "85070591730234615865843651857942052864"
>> Fatal configuration error; unable to start. See log for stacktrace.
>>
>> I really need to get replication going between 2 nodes. Can someone
>> clue me into why this may be crashing?
>>
>> Thanks!
>> Tim
>>
>> --
>> GPG me!!
>>
>> gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B
>>
>>
>
>
> --
> GPG me!!
>
> gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B
>
>
>
--
GPG me!!
gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B
