Udo, One thing to get out of the way - you're running task trackers on all of your cassandra nodes, right? That is the first and foremost way to get good performance. Otherwise you don't have data locality, which is really the point of map/reduce, co-locating your data and your processes operating over that data. You're probably already doing that, but I had forgotten to ask that before.
Besides that... You might try messing with those values a bit more as well as the input split size - cassandra.input.split.size which defaults to ~65k. So you might try rpc timeout of 30s just to see if that helps and try reducing the input split size significantly to see if that helps. For your setup I don't see the range batch size as being meaningful at all with your narrow rows, so don't worry about that. Also, the capacity of your nodes and the number of mappers/reducers you're trying to use will also have an effect on whether it has to timeout. Essentially it's getting overwhelmed for some reason. You might lower the number of mappers and reducers you're hitting your cassandra cluster with to see if that helps. Jeremy On May 2, 2011, at 6:25 AM, Subscriber wrote: > Hi Jeremy, > > thanks for the link. > I doubled the rpc_timeout (20 seconds) and reduced the range-batch-size to > 2048, but I still get timeouts... > > Udo > > Am 29.04.2011 um 18:53 schrieb Jeremy Hanna: > >> It sounds like there might be some tuning you can do to your jobs - take a >> look at the wiki's HadoopSupport page, specifically the Troubleshooting >> section: >> http://wiki.apache.org/cassandra/HadoopSupport#Troubleshooting >> >> On Apr 29, 2011, at 11:45 AM, Subscriber wrote: >> >>> Hi all, >>> >>> We want to share our experiences we got during our Cassandra plus Hadoop >>> Map/Reduce evaluation. >>> Our question was whether Cassandra is suitable for massive distributed data >>> writes using Hadoop's Map/Reduce feature. >>> >>> Our setup is described in the attached file 'cassandra_stress_setup.txt'. >>> >>> <cassandra_stress_setup.txt> >>> >>> The stress test uses 800 map-tasks to generate data and store it into >>> cassandra. >>> Each map task writes 500.000 items (i.e. rows) resulting in totally >>> 400.000.000 items. >>> There are max. 8 map tasks in parallel on each node. An item contains >>> (beside the key) two long and two double values, >>> so that items are a few 100 bytes in size. This leads to a total data size >>> of approximately 120GB. >>> >>> The Map-Tasks uses the Hector API. Hector is "feeded" with all three data >>> nodes. The data is written in chunks of 1000 items. >>> The ConsitencyLevel is set to ONE. >>> >>> We ran the stress tests in several runs with different configuration >>> settings (for example I started with cassandra's default configuration and >>> I used Pelops for another test). >>> >>> Our observations are like this: >>> >>> 1) Cassandra is really fast - we are really impressed about the huge write >>> throughput. A map task writing 500.000 items (appr. 200MB) usually finishes >>> under 5 minutes. >>> 2) However - unfortunately all tests failed in the end >>> >>> In the beginning there are no problems. The first 100 (in some tests the >>> first 300(!)) map tasks are looking fine. But then the trouble starts. >>> >>> Hadoop's sample output after ~15 minutes: >>> >>> Kind % Complete Num Tasks Pending Running Complete >>> Killed Failed/Killed Task Attempts >>> map 14.99% 800 680 24 96 0 >>> 0 / 0 >>> reduce 3.99% 1 0 1 0 >>> 0 0 / 0 >>> >>> Some stats: >>>> top >>> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND >>> >>> >>> >>> 31159 xxxx 20 0 2569m 2.2g 9.8m S 450 18.6 61:44.73 java >>> >>> >>> >>> >>>> vmstat 1 5 >>> procs -----------memory---------- ---swap-- -----io---- -system-- >>> ----cpu---- >>> r b swpd free buff cache si so bi bo in cs us sy id wa >>> 2 1 36832 353688 242820 6837520 0 0 15 73 3 2 3 0 96 >>> 0 >>> 11 1 36832 350992 242856 6852136 0 0 1024 20900 4508 11738 19 1 >>> 74 6 >>> 8 0 36832 339728 242876 6859828 0 0 0 1068 45809 107008 69 10 >>> 20 0 >>> 1 0 36832 330212 242884 6868520 0 0 0 80 42112 92930 71 8 >>> 21 0 >>> 2 0 36832 311888 242908 6887708 0 0 1024 0 20277 46669 46 7 >>> 47 0 >>> >>>> cassandra/bin/nodetool -h tirdata1 -p 28080 ring >>> Address Status State Load Owns Token >>> >>> >>> 113427455640312821154458202477256070484 >>> 192.168.11.198 Up Normal 6.72 GB 33.33% 0 >>> >>> 192.168.11.199 Up Normal 6.72 GB 33.33% >>> 56713727820156410577229101238628035242 >>> 192.168.11.202 Up Normal 6.68 GB 33.33% >>> 113427455640312821154458202477256070484 >>> >>> >>> Hadoop's sample output after ~20 minutes: >>> >>> Kind % Complete Num Tasks Pending Running Complete >>> Killed Failed/Killed Task Attempts >>> map 15.49% 800 673 24 103 0 >>> 6 / 0 >>> reduce 4.16% 1 0 1 0 >>> 0 0 / 0 >>> >>> What went wrong? It's always the same. The clients cannot reach the nodes >>> anymore. >>> >>> java.lang.RuntimeException: work failed >>> at >>> com.zfabrik.hadoop.impl.HadoopProcessRunner.work(HadoopProcessRunner.java:109) >>> at >>> com.zfabrik.hadoop.impl.DelegatingMapper.run(DelegatingMapper.java:40) >>> at org.apache.hadoop.mapred.MapTask.runNewMapper(MapTask.java:625) >>> at org.apache.hadoop.mapred.MapTask.run(MapTask.java:305) >>> at org.apache.hadoop.mapred.Child.main(Child.java:170) >>> Caused by: java.lang.reflect.InvocationTargetException >>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) >>> at >>> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) >>> at >>> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) >>> at java.lang.reflect.Method.invoke(Method.java:597) >>> at >>> com.zfabrik.hadoop.impl.HadoopProcessRunner.work(HadoopProcessRunner.java:107) >>> ... 4 more >>> Caused by: java.lang.RuntimeException: >>> me.prettyprint.hector.api.exceptions.HUnavailableException: : May not be >>> enough replicas present to handle consistency level. >>> at >>> com.zfabrik.hadoop.impl.DelegatingMapper$1.run(DelegatingMapper.java:47) >>> at com.zfabrik.work.WorkUnit.work(WorkUnit.java:342) >>> at >>> com.zfabrik.impl.launch.ProcessRunnerImpl.work(ProcessRunnerImpl.java:189) >>> ... 9 more >>> Caused by: me.prettyprint.hector.api.exceptions.HUnavailableException: : >>> May not be enough replicas present to handle consistency level. >>> at >>> me.prettyprint.cassandra.service.ExceptionsTranslatorImpl.translate(ExceptionsTranslatorImpl.java:52) >>> at >>> me.prettyprint.cassandra.service.KeyspaceServiceImpl$1.execute(KeyspaceServiceImpl.java:95) >>> at >>> me.prettyprint.cassandra.service.KeyspaceServiceImpl$1.execute(KeyspaceServiceImpl.java:88) >>> at >>> me.prettyprint.cassandra.service.Operation.executeAndSetResult(Operation.java:101) >>> at >>> me.prettyprint.cassandra.connection.HConnectionManager.operateWithFailover(HConnectionManager.java:221) >>> at >>> me.prettyprint.cassandra.service.KeyspaceServiceImpl.operateWithFailover(KeyspaceServiceImpl.java:129) >>> at >>> me.prettyprint.cassandra.service.KeyspaceServiceImpl.batchMutate(KeyspaceServiceImpl.java:100) >>> at >>> me.prettyprint.cassandra.service.KeyspaceServiceImpl.batchMutate(KeyspaceServiceImpl.java:106) >>> at >>> me.prettyprint.cassandra.model.MutatorImpl$2.doInKeyspace(MutatorImpl.java:203) >>> at >>> me.prettyprint.cassandra.model.MutatorImpl$2.doInKeyspace(MutatorImpl.java:200) >>> at >>> me.prettyprint.cassandra.model.KeyspaceOperationCallback.doInKeyspaceAndMeasure(KeyspaceOperationCallback.java:20) >>> at >>> me.prettyprint.cassandra.model.ExecutingKeyspace.doExecute(ExecutingKeyspace.java:85) >>> at >>> me.prettyprint.cassandra.model.MutatorImpl.execute(MutatorImpl.java:200) >>> at >>> sample.cassandra.itemrepo.mapreduce.HectorBasedMassItemGenMapper._flush(HectorBasedMassItemGenMapper.java:122) >>> at >>> sample.cassandra.itemrepo.mapreduce.HectorBasedMassItemGenMapper.map(HectorBasedMassItemGenMapper.java:103) >>> at >>> sample.cassandra.itemrepo.mapreduce.HectorBasedMassItemGenMapper.map(HectorBasedMassItemGenMapper.java:1) >>> at org.apache.hadoop.mapreduce.Mapper.run(Mapper.java:144) >>> at >>> com.zfabrik.hadoop.impl.DelegatingMapper$1.run(DelegatingMapper.java:45) >>> ... 11 more >>> Caused by: UnavailableException() >>> at >>> org.apache.cassandra.thrift.Cassandra$batch_mutate_result.read(Cassandra.java:16485) >>> at >>> org.apache.cassandra.thrift.Cassandra$Client.recv_batch_mutate(Cassandra.java:916) >>> at >>> org.apache.cassandra.thrift.Cassandra$Client.batch_mutate(Cassandra.java:890) >>> at >>> me.prettyprint.cassandra.service.KeyspaceServiceImpl$1.execute(KeyspaceServiceImpl.java:93) >>> ... 27 more >>> >>> ------- >>> Task attempt_201104291345_0001_m_000028_0 failed to report status for 602 >>> seconds. Killing! >>> >>> >>> I also observed also that when connecting to cassandra-cli during the >>> stress test, it was not possible to list the items written so far: >>> >>> [default@unknown] use ItemRepo; >>> Authenticated to keyspace: ItemRepo >>> [default@ItemRepo] list Items; >>> Using default limit of 100 >>> Internal error processing get_range_slices >>> >>> >>> It seems to me that from the point I performed the read operation in the >>> cli tool, the node becomes somehow confused. >>> Looking on the jconsole shows that up to this point the heap is well: it >>> grows and gcs clears it again. >>> But from this point on, gcs doesn't really help anymore (see attached >>> screenshot). >>> >>> >>> <Bildschirmfoto 2011-04-29 um 18.30.14.png> >>> >>> >>> This has also impact on the other nodes as one can see in the second >>> screenshot. The CPU Usage goes down as well as the heap memory usage. >>> <Bildschirmfoto 2011-04-29 um 18.36.34.png> >>> >>> I'll run another stress test at the weekend with >>> >>> * MAX_HEAP_SIZE="4G" >>> * HEAP_NEWSIZE="400M" >>> >>> Best Regards >>> Udo >>> >> >
