Hi Gursimran, Thanks so much for the reply. It ultimately turned out that the bug was a hardware issue! I really appreciate all your work for the ubuntu project in general.
Thanks a lot, Tomás 2010/11/4 Gursimran singh Mohar <simar....@gmail.com> > Hi Thomas > Thank you for taking the time to report this bug and helping to make Ubuntu > better. We are sorry that we do not always have the capacity to look at all > reported bugs in a timely manner. There have been many changes in Ubuntu > since that time you reported the bug and your problem may have been fixed > with some of the updates. If you could test the current Ubuntu stable > release(maverick ubuntu 10.10), this would help us a lot. If you can test > it, and it is still an issue, we would appreciate if you could upload > updated logs by running apport-collect <bug #>, and any other logs that are > relevant for this particular issue. > > ** Changed in: xserver-xorg-input-synaptics (Ubuntu) > Status: New => Incomplete > > ** Changed in: xserver-xorg-input-synaptics (Ubuntu) > Importance: Undecided => Low > > -- > Touchpad does not work after recent update > https://bugs.launchpad.net/bugs/528214 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “xserver-xorg-input-synaptics” package in Ubuntu: Incomplete > > Bug description: > Binary package hint: xserver-xorg-input-synaptics > > bios-version:V1.03 > system-manufacturer:eMachines > system-product-name:eMachines D620 > system-version:0100 > > Linux tomas-laptop 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC > 2010 i686 GNU/Linux > > Ubuntu 2.6.31-19.56-generic > > 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge > [1002:7910] > Subsystem: Gateway 2000 Device [107b:0185] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 64 > Kernel modules: ati-agp > > 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge > (Internal gfx) [1002:7912] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 00009000-00009fff > Memory behind bridge: f0000000-f01fffff > Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [b0] Subsystem: ATI Technologies Inc RS690 PCI to PCI > Bridge (Internal gfx) [1002:7912] > Kernel modules: shpchp > > 00:04.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7914] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 > I/O behind bridge: 0000a000-0000afff > Memory behind bridge: f0200000-f02fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- > CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive+ BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surpise- > > To unsubscribe from this bug, go to: > > https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/528214/+subscribe > -- Touchpad does not work after recent update https://bugs.launchpad.net/bugs/528214 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to xserver-xorg-input-synaptics in ubuntu. _______________________________________________ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
