On Mon, Nov 2, 2009 at 7:52 AM, CymruAmBydd <morusni...@hotmail.com> wrote: > Thank you Cefn, excellent work around. > > I have just installed 9.10 having previously used Gutsy, Hardy, Intrepid > and Jaunty and having to replace my trusty iiyama vision master pro 512 > with a Sony Multiscan 520GS and swapping out my Belkin Omniview E-series > KVM for the Avocent Switchview 100 KVM; which has sound. Kept the FX5200 > graphics card. Somewhere along the line I lost control of the monitor > refresh rate. > > I found the tech specs for my Sony Multiscan 520GS i.e. max resolution > of 1600 x 1200 @75Hz etc. > > gtf to generate the modeline > > and edited xorg.conf in a terminal (sudo nano /etc/X11/xorg.conf): > > > Section "Monitor" > Identifier "Sony CPD-520GS" > HorizSync 30-96 > VertRefresh 48-160 > Modeline "1600x1200_75.00" 205.99 1600 1720 1896 2192 1200 1201 > 1204$ > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Default Device" > Monitor "Sony CPD-520GS" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "1600x1200_75.00" > EndSubSection > EndSection > > Section "Module" > Load "glx" > EndSection > > Section "Device" > Identifier "Default Device" > Driver "nvidia" > Option "NoLogo" "True" > EndSection > > > NOW at last I have control! > > It shouldn't be like this. > > The only minor wrinkle is that I can't get the max resolution. > > The best I can do is 1400 x 1050 @ 70Hz but at least it's workable i.e. > the I have control and the screen doesn't wobble any more. > > Failure to get the max res may be down to the KVM switch but having > spent hours this morning I'm not about to put the monitor directly onto > the pc to test this - I might do it later. > > NB. 1400 x 1050 @ 75Hz doesn't work and 1400 x 1050 @ 85Hz doesn't work, > none of the 4:3 aspect ratio 1600 x 1200's work i.e. very strange > distorted and dulled or absent image which luckily reverts back to the > previous setting after a short while to give me the chance of another > attempt. > > Thank you. >
This is why Ubuntu, and X.org in general, needs to have a way to manually select what type of monitor you have in a GUI. This problem has persisted long enough, when will this be resolved? Its now beyond time for this to be fixed. Its ridiculous that such a simple matter as this has been allowed to molder this long, and its such a vital component of the operating system ... the Display. Without it you can't use Ubuntu at all. Why hasn't this problem been resolved? This problem has existed in Ubuntu since 8.04. Having to edit a config file (ie; xorg.conf) to get something as simple as this to work properly in a Modern Day Operating System is absolutely unacceptable. Canonical needs to stop putting their heads in the sand and fix this embarrassment. -- Michael "TheZorch" Haney thezo...@gmail.com http://thezorch.googlepages.com/home Twitter: TheZorch | Skype: thezorch AIM: thezo...@gmail.com | Yahoo IM: zorchhaney ICQ: 343230252 | GoogleTalk: thezorch MSN Messeger: haneymich...@hotmail.com Free Your PC from the Bondage of Windows http://www.ubuntu.com -- can't configure display resolution (monitor, graphics card) manually in gui https://bugs.launchpad.net/bugs/240916 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to x-kit in ubuntu. _______________________________________________ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
