Public bug reported:
While watching a YouTube video, screen went blank. Audio cut out, after
a few seconds the audio started playing normally for a few more seconds
then kept repeating the last half a second of audio for a few more
seconds. Then it stopped and nothing responded.
It did this a few times over the course of an hour. Had to power off the
PC to get a reboot. Last time it did this I ssh'd from another PC to get
dmesg and syslog info as it happened. Attaching those captures.
clickwir@mach:~$ uname -a
Linux mach 4.13.0-25-generic #29-Ubuntu SMP Mon Jan 8 21:14:41 UTC 2018 x86_64
x86_64 x86_64 GNU/Linux
clickwir@mach:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 17.10
Release: 17.10
Codename: artful
#### dmesg ####
[ 10.136445] bond0: Enslaving enp7s0f1 as an active interface with an up link
[ 10.136497] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 10.144317] e1000e 0000:07:00.0 enp7s0f0: changing MTU from 1500 to 9000
[ 10.310070] e1000e 0000:07:00.1 enp7s0f1: changing MTU from 1500 to 9000
[ 10.625965] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.730200] r8169 0000:02:00.0 eth0: link down
[ 10.730246] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.573052] e1000e: enp7s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 12.633055] e1000e: enp7s0f1 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 16.875586] FS-Cache: Loaded
[ 16.896010] FS-Cache: Netfs 'nfs' registered for caching
[ 16.914353] NFS: Registering the id_resolver key type
[ 16.914364] Key type id_resolver registered
[ 16.914364] Key type id_legacy registered
[ 17.485539] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.513074] Ebtables v2.0 registered
[ 17.564084] radeon_dp_aux_transfer_native: 74 callbacks suppressed
[ 17.863232] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 17.864899] virbr0: port 1(virbr0-nic) entered blocking state
[ 17.864903] virbr0: port 1(virbr0-nic) entered disabled state
[ 17.864995] device virbr0-nic entered promiscuous mode
[ 17.960322] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 18.038385] virbr0: port 1(virbr0-nic) entered blocking state
[ 18.038388] virbr0: port 1(virbr0-nic) entered listening state
[ 18.095412] virbr0: port 1(virbr0-nic) entered disabled state
[ 89.815180] radeon_dp_aux_transfer_native: 74 callbacks suppressed
[ 92.062606] show_signal_msg: 27 callbacks suppressed
[ 92.062608] xembedsniproxy[2507]: segfault at 2 ip 000055ea4a6890d7 sp
00007fff6c7a7c30 error 4 in xembedsniproxy[55ea4a67d000+13000]
[ 95.955166] radeon_dp_aux_transfer_native: 74 callbacks suppressed
### abnormal begins here ###
[ 1429.496584] sched: RT throttling activated
[ 1429.706303] clocksource: timekeeping watchdog on CPU3: Marking clocksource
'tsc' as unstable because the skew is too large:
[ 1429.706305] clocksource: 'hpet' wd_now: c4741f2e
wd_last: c3bcdb60 mask: ffffffff
[ 1429.706306] clocksource: 'tsc' cs_now: 4acf553cc2d
cs_last: 4ac71a54967 mask: ffffffffffffffff
[ 1429.706309] tsc: Marking TSC unstable due to clocksource watchdog
[ 1434.739539] nfs: server 10.1.0.4 not responding, still trying
[ 1437.469449] nfs: server 10.1.0.4 OK
[ 1439.143494] TSC found unstable after boot, most likely due to broken BIOS.
Use 'tsc=unstable'.
[ 1439.143498] sched_clock: Marking unstable (1439092126811,
50992985)<-(1439477690212, -334199655)
[ 1440.403916] clocksource: Switched to clocksource hpet
[ 1443.553969] hrtimer: interrupt took 629117003 ns
[ 1454.039245] INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to
run: 209.684 msecs
[ 1454.454671] INFO: NMI handler (perf_event_nmi_handler) took too long to run:
44.646 msecs
[ 1454.454673] perf: interrupt took too long (349007 > 2500), lowering
kernel.perf_event_max_sample_rate to 500
[ 1455.293492] INFO: NMI handler (perf_event_nmi_handler) took too long to run:
61.329 msecs
[ 1455.293494] perf: interrupt took too long (479410 > 436258), lowering
kernel.perf_event_max_sample_rate to 250
[ 1463.284343] INFO: NMI handler (perf_event_nmi_handler) took too long to run:
172.103 msecs
[ 1463.284345] perf: interrupt took too long (1344829 > 599262), lowering
kernel.perf_event_max_sample_rate to 250
[ 1465.175694] INFO: NMI handler (perf_event_nmi_handler) took too long to run:
209.709 msecs
[ 1479.788229] perf: interrupt took too long (1849954 > 1681036), lowering
kernel.perf_event_max_sample_rate to 250
[ 1481.889284] INFO: NMI handler (perf_event_nmi_handler) took too long to run:
209.761 msecs
[ 1481.889284] perf: interrupt took too long (3252104 > 2312442), lowering
kernel.perf_event_max_sample_rate to 250
[ 1491.745472] INFO: NMI handler (perf_event_nmi_handler) took too long to run:
401.897 msecs
[ 1491.745472] perf: interrupt took too long (4443157 > 4065130), lowering
kernel.perf_event_max_sample_rate to 250
[ 1500.339407] watchdog: BUG: soft lockup - CPU#7 stuck for 23s!
[kworker/u16:5:228]
[ 1500.339410] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ipt_REJECT nf_reject_ipv4
xt_tcpudp bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables
iptable_filter nfsv3 nfs_acl cfg80211 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs
lockd grace fscache zram binfmt_misc nls_iso8859_1 snd_hda_codec_hdmi
edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel pcbc aesni_intel aes_x86_64 input_leds snd_hda_intel
snd_hda_codec crypto_simd glue_helper snd_hda_core cryptd snd_hwdep
snd_seq_midi snd_seq_midi_event fam15h_power eeepc_wmi asus_wmi snd_rawmidi
sparse_keymap video wmi_bmof k10temp snd_ctxfi snd_pcm snd_seq i2c_piix4
snd_seq_device
[ 1500.339445] snd_timer snd soundcore shpchp mac_hid bonding parport_pc ppdev
lp parport sunrpc ip_tables x_tables autofs4 btrfs xor raid6_pq hid_generic
usbhid hid amdkfd amd_iommu_v2 radeon i2c_algo_bit ttm e1000e drm_kms_helper
syscopyarea firewire_ohci ptp sysfillrect firewire_core sysimgblt crc_itu_t
fb_sys_fops pps_core ahci drm r8169 libahci mii wmi
[ 1500.339465] CPU: 7 PID: 228 Comm: kworker/u16:5 Not tainted
4.13.0-25-generic #29-Ubuntu
[ 1500.339465] Hardware name: To be filled by O.E.M. To be filled by
O.E.M./M5A97 EVO, BIOS 1604 10/16/2012
[ 1500.339492] Workqueue: events_power_efficient radeon_fence_check_lockup
[radeon]
[ 1500.339493] task: ffff99df17762e80 task.stack: ffffb91f43de4000
[ 1500.339512] RIP: 0010:evergreen_is_display_hung+0x125/0x1b0 [radeon]
[ 1500.339513] RSP: 0018:ffffb91f43de7d80 EFLAGS: 00000286 ORIG_RAX:
ffffffffffffff10
[ 1500.339515] RAX: 00000000ffffffff RBX: 0000000000000008 RCX: 0000000000000003
[ 1500.339515] RDX: 0000000000000003 RSI: 00000000000112a0 RDI: 00000000000550a7
[ 1500.339516] RBP: ffffb91f43de7dd8 R08: 0000000000000001 R09: 0000000000000000
[ 1500.339517] R10: ffff99df173f4000 R11: 0000000000000000 R12: ffff99df173f4000
[ 1500.339517] R13: 0000000000000002 R14: 000000000000003f R15: 0000000000000001
[ 1500.339518] FS: 0000000000000000(0000) GS:ffff99df3edc0000(0000)
knlGS:0000000000000000
[ 1500.339519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1500.339520] CR2: 00007f048862b000 CR3: 0000000560b5e000 CR4: 00000000000406e0
[ 1500.339520] Call Trace:
[ 1500.339542] evergreen_gpu_check_soft_reset+0xc5/0x120 [radeon]
[ 1500.339560] evergreen_gfx_is_lockup+0x17/0x40 [radeon]
[ 1500.339574] radeon_fence_check_lockup+0x93/0x180 [radeon]
[ 1500.339577] ? __schedule+0x293/0x880
[ 1500.339580] process_one_work+0x1e7/0x410
[ 1500.339581] worker_thread+0x4b/0x420
[ 1500.339583] kthread+0x125/0x140
[ 1500.339585] ? process_one_work+0x410/0x410
[ 1500.339586] ? kthread_create_on_node+0x70/0x70
[ 1500.339588] ret_from_fork+0x1f/0x30
[ 1500.339589] Code: ca 8b 04 95 40 90 70 c0 05 a0 6e 00 00 49 3b 84 24 b0 01
00 00 48 89 c6 72 07 3d ff ff 00 00 77 41 49 03 84 24 e8 01 00 00 8b 00 <39> 44
95 b8 74 05 f7 d3 41 21 de 83 c1 01 41 39 8c 24 98 26 00
[ 1504.114131] radeon 0000:01:00.0: ring 0 stalled for more than 30404msec
[ 1504.114139] radeon 0000:01:00.0: GPU lockup (current fence id
0x000000000001c40a last fence id 0x000000000001c40b on ring 0)
#### end dmesg ####
#### syslog ####
Jan 11 21:50:55 mach PackageKit: refresh-cache transaction /1263_aaaabccc from
uid 1000 finished with success after 2337ms
Jan 11 21:50:58 mach PackageKit: get-updates transaction /1264_aaabeebe from
uid 1000 finished with success after 2528ms
Jan 11 21:50:58 mach PackageKit: get-updates transaction /1265_cadbcaec from
uid 1000 finished with success after 655ms
Jan 11 21:50:59 mach PackageKit: get-updates transaction /1266_abecebda from
uid 1000 finished with success after 606ms
Jan 11 21:53:07 mach systemd[1]: Started Session 6 of user clickwir.
Jan 11 21:53:07 mach udev-acl.ck[4215]: g_slice_set_config: assertion
'sys_page_size == 0' failed
Jan 11 21:53:07 mach console-kit-daemon[2348]: missing action
Jan 11 21:53:17 mach systemd[1]: Started Session 7 of user clickwir.
Jan 11 21:53:17 mach udev-acl.ck[4309]: g_slice_set_config: assertion
'sys_page_size == 0' failed
Jan 11 21:53:17 mach console-kit-daemon[2348]: missing action
Jan 11 21:57:45 mach dbus[1073]: [system] Activating via systemd: service
name='org.bluez' unit='dbus-org.bluez.service'
Jan 11 21:59:36 mach systemd[1]: Starting Cleanup of Temporary Directories...
Jan 11 21:59:36 mach systemd-tmpfiles[4804]: [/usr/lib/tmpfiles.d/var.conf:14]
Duplicate line for path "/var/log", ignoring.
Jan 11 21:59:36 mach systemd[1]: Started Cleanup of Temporary Directories.
Jan 11 22:04:15 mach systemd[1]: Starting Message of the Day...
Jan 11 22:04:15 mach systemd[1]: Started Run anacron jobs.
Jan 11 22:04:15 mach anacron[4897]: Anacron 2.3 started on 2018-01-11
Jan 11 22:04:15 mach anacron[4897]: Normal exit (0 jobs run)
Jan 11 22:04:16 mach 50-motd-news[4896]: * Ubuntu Updates for the Meltdown /
Spectre Vulnerabilities
Jan 11 22:04:16 mach 50-motd-news[4896]: - https://ubu.one/uMelt
Jan 11 22:04:16 mach systemd[1]: Started Message of the Day.
### abnormal begins here ###
Jan 11 22:08:10 mach kernel: [ 1429.496584] sched: RT throttling activated
Jan 11 22:08:10 mach kernel: [ 1429.706303] clocksource: timekeeping watchdog
on CPU3: Marking clocksource 'tsc' as unstable because the skew is too large:
Jan 11 22:08:10 mach kernel: [ 1429.706305] clocksource:
'hpet' wd_now: c4741f2e wd_last: c3bcdb60 mask: ffffffff
Jan 11 22:08:10 mach kernel: [ 1429.706306] clocksource:
'tsc' cs_now: 4acf553cc2d cs_last: 4ac71a54967 mask: ffffffffffffffff
Jan 11 22:08:10 mach kernel: [ 1429.706309] tsc: Marking TSC unstable due to
clocksource watchdog
Jan 11 22:08:15 mach kernel: [ 1434.739539] nfs: server 10.10.10.10 not
responding, still trying
Jan 11 22:08:20 mach kernel: [ 1437.469449] nfs: server 10.10.10.10 OK
Jan 11 22:08:20 mach kernel: [ 1439.143494] TSC found unstable after boot, most
likely due to broken BIOS. Use 'tsc=unstable'.
Jan 11 22:08:20 mach kernel: [ 1439.143498] sched_clock: Marking unstable
(1439092126811, 50992985)<-(1439477690212, -334199655)
Jan 11 22:08:20 mach kernel: [ 1440.403916] clocksource: Switched to
clocksource hpet
Jan 11 22:08:26 mach kernel: [ 1443.553969] hrtimer: interrupt took 629117003
ns
Jan 11 22:08:29 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
snd_pcm_avail() returned a value that is exceptionally large: 1196568 bytes
(6232 ms).
Jan 11 22:08:35 mach kernel: [ 1454.039245] INFO: NMI handler
(nmi_cpu_backtrace_handler) took too long to run: 209.684 msecs
Jan 11 22:08:37 mach kernel: [ 1454.454671] INFO: NMI handler
(perf_event_nmi_handler) took too long to run: 44.646 msecs
Jan 11 22:08:37 mach kernel: [ 1454.454673] perf: interrupt took too long
(349007 > 2500), lowering kernel.perf_event_max_sample_rate to 500
Jan 11 22:08:37 mach kernel: [ 1455.293492] INFO: NMI handler
(perf_event_nmi_handler) took too long to run: 61.329 msecs
Jan 11 22:08:38 mach kernel: [ 1455.293494] perf: interrupt took too long
(479410 > 436258), lowering kernel.perf_event_max_sample_rate to 250
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: Most
likely this is a bug in the ALSA driver 'snd_ctxfi'. Please report this issue
to the ALSA developers.
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
snd_pcm_dump():
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: Hardware
PCM card 0 'Creative X-Fi' device 0 subdevice 0
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: Its setup
is:
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: stream
: PLAYBACK
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: access
: MMAP_INTERLEAVED
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: format
: S16_LE
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
subformat : STD
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
channels : 2
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: rate
: 48000
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: exact
rate : 48000 (48000/1)
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: msbits
: 16
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
buffer_size : 32768
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
period_size : 16384
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
period_time : 341333
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
tstamp_mode : ENABLE
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
tstamp_type : MONOTONIC
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
period_step : 1
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
avail_min : 31041
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
period_event : 0
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
start_threshold : -1
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
stop_threshold : 4611686018427387904
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
silence_threshold: 0
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
silence_size : 0
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
boundary : 4611686018427387904
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
appl_ptr : 5628650
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: hw_ptr
: 5895024
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
snd_pcm_delay() returned a value that is exceptionally large: -2045036 bytes
(-10651 ms).
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: Most
likely this is a bug in the ALSA driver 'snd_ctxfi'. Please report this issue
to the ALSA developers.
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
snd_pcm_dump():
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: Hardware
PCM card 0 'Creative X-Fi' device 0 subdevice 0
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: Its setup
is:
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: stream
: PLAYBACK
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: access
: MMAP_INTERLEAVED
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: format
: S16_LE
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
subformat : STD
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
channels : 2
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: rate
: 48000
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: exact
rate : 48000 (48000/1)
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: msbits
: 16
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
buffer_size : 32768
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
period_size : 16384
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
period_time : 341333
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
tstamp_mode : ENABLE
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
tstamp_type : MONOTONIC
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
period_step : 1
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
avail_min : 31041
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
period_event : 0
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
start_threshold : -1
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
stop_threshold : 4611686018427387904
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
silence_threshold: 0
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
silence_size : 0
Jan 11 22:08:38 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
boundary : 4611686018427387904
Jan 11 22:08:44 mach kernel: [ 1463.284343] INFO: NMI handler
(perf_event_nmi_handler) took too long to run: 172.103 msecs
Jan 11 22:08:44 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c:
appl_ptr : 5655530
Jan 11 22:08:45 mach kernel: [ 1463.284345] perf: interrupt took too long
(1344829 > 599262), lowering kernel.perf_event_max_sample_rate to 250
Jan 11 22:08:48 mach kernel: [ 1465.175694] INFO: NMI handler
(perf_event_nmi_handler) took too long to run: 209.709 msecs
Jan 11 22:08:48 mach pulseaudio[2525]: [alsa-sink-ctxfi] alsa-util.c: hw_ptr
: 6186922
Jan 11 22:08:49 mach sSMTP[5014]: Creating SSL connection to host
Jan 11 22:08:49 mach sSMTP[5014]: SSL connection using
ECDHE_RSA_AES_256_GCM_SHA384
Jan 11 22:08:51 mach sSMTP[5014]: Sent mail for netd...@clickwir.com (221 2.0.0
Bye) uid=999 username=netdata outbytes=9296
Jan 11 22:08:51 mach sSMTP[5028]: Creating SSL connection to host
Jan 11 22:08:51 mach sSMTP[5028]: SSL connection using
ECDHE_RSA_AES_256_GCM_SHA384
Jan 11 22:08:53 mach sSMTP[5028]: Sent mail for netd...@clickwir.com (221 2.0.0
Bye) uid=999 username=netdata outbytes=9326
Jan 11 22:09:00 mach kernel: [ 1479.788229] perf: interrupt took too long
(1849954 > 1681036), lowering kernel.perf_event_max_sample_rate to 250
#### end syslog ####
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: xorg 1:7.7+19ubuntu3
ProcVersionSignature: Ubuntu 4.13.0-25.29-generic 4.13.13
Uname: Linux 4.13.0-25-generic x86_64
ApportVersion: 2.20.7-0ubuntu3.7
Architecture: amd64
CompizPlugins: No value set for
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: None
Date: Thu Jan 11 22:46:24 2018
DistUpgraded: 2017-10-17 21:26:23,088 DEBUG icon theme changed, re-reading
DistroCodename: artful
DistroVariant: ubuntu
ExtraDebuggingInterest: I just need to know a workaround
GraphicsCard:
Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670]
[1002:6758] (prog-if 00 [VGA controller])
Subsystem: Dell Radeon HD 6670 [1028:0b0e]
InstallationDate: Installed on 2015-02-14 (1063 days ago)
InstallationMedia: Kubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
LightdmGreeterLogOld:
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: No such
file or directory
QFileSystemWatcher: failed to add paths: /var/lib/lightdm/.config/ibus/bus
Bus::open: Can not get ibus-daemon's address.
IBusInputContext::createInputContext: no connection to ibus-daemon
MachineType: To be filled by O.E.M. To be filled by O.E.M.
ProcEnviron:
LANGUAGE=
TERM=xterm-256color
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-25-generic.efi.signed
root=UUID=d68d35a1-918f-429a-815c-49d116bac1b5 ro
SourcePackage: xorg
Symptom: display
UpgradeStatus: Upgraded to artful on 2017-10-18 (86 days ago)
dmi.bios.date: 10/16/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 1604
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: M5A97 EVO
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr1604:bd10/16/2012:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKCOMPUTERINC.:rnM5A97EVO:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.family: To be filled by O.E.M.
dmi.product.name: To be filled by O.E.M.
dmi.product.version: To be filled by O.E.M.
dmi.sys.vendor: To be filled by O.E.M.
version.compiz: compiz N/A
version.libdrm2: libdrm2 2.4.83-1
version.libgl1-mesa-dri: libgl1-mesa-dri 17.2.2-0ubuntu1
version.libgl1-mesa-glx: libgl1-mesa-glx 17.2.2-0ubuntu1
version.xserver-xorg-core: xserver-xorg-core 2:1.19.5-0ubuntu2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.5-1ubuntu1
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.10.0-1
version.xserver-xorg-video-intel: xserver-xorg-video-intel
2:2.99.917+git20170309-0ubuntu1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2
** Affects: xorg (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug artful ubuntu
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1742867
Title:
Screen blank, audio choppy, system locked
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1742867/+subscriptions
_______________________________________________
Mailing list: https://launchpad.net/~ubuntu-x-swat
Post to : ubuntu-x-swat@lists.launchpad.net
Unsubscribe : https://launchpad.net/~ubuntu-x-swat
More help : https://help.launchpad.net/ListHelp
