-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Seif Attar wrote:
| Hello,
|
| Thanks for the email, somehow Michael's email slipped though my
| fingers! :S and your email made go back to look for his email!
|
| On Tue, 2008-02-05 at 21:57 +0000, Neil Greenwood wrote:
|> On 05/02/2008, Michael Holloway <[EMAIL PROTECTED]> wrote:
|>> A log file that might help you diagnose is /var/log/messages - if there
|>> is anything interesting in there, post it here and we'll have a look.
|>>
|> Something that Michael didn't make clear, just in case you're new to
|> Linux, is that messages written to /var/log/messages survive past a
|> reboot, so you don't have to worry about losing anything when you have
|> to do the hard shutdown.
|
| I have looked in /var/log/messages, couldn't find anything there,
| anyways, it didn't crash today, maybe because I was home all day and was
| using it all the time (or the kernel headers update?). It'll probably be
| crashed by tomorrow morning, and i'll messages again.
|
|> Another reference that might help is this forum page
|> http://ubuntuforums.org/showthread.php?t=617349
|> It describes some key presses you can use to save information to the
|> disk before doing the hard shutdown/reboot - it helps to stop you
|> needing to fsck (i.e. check the disk) when you next boot.
|> One final thing to try: when the machine 'locks up', try swapping to a
|> virtual terminal (Ctrl+Alt+F1), logging in and typing 'dmesg'. If the
|> machine isn't totally dead, that might give you some info that would
|> help debug the problem.
|
| thanks for that, I can't really check this right now, as we are watching
| a movie on mythtv (nice) and i dont want to crash it! so I'll check this
| later, but I highly doubt that it will work, as not even the num lock or
| caps lock buttons work.
|
| It could be a power problem as Michael suggested, I havent disabled
| anything in the bios, will try that on next crash. One thing worth
| mentioning is that I do notice weird behaviour with my external hard
| drive, if i restart the computer, it is mounted normally (/home in fstab
| using uuid, XFS), but if i shutdown let the drives power off, and then
| power on again, it fails to mount. and i have to manually change tty and
| mount it, but since I wasn't planning on powering the machine off often,
| this didn't bother me, but maybe it's realted to the hanging? could it
| be that ubuntu puts hard drivers to sleep and doesn't get them back on?
| maybe, anyways, i'll keep you up to date as soon as i get anything.
| thanx for the help.
Ok, morning came and that machine hadn't crashed, so I started the
unison sync again to force the machine to crash, and something happened
while I had an ssh session open, the server didn't crash as it usually
does (without any errors), this time it returned an I/O error to unison
and then it crashed, but somehow my ssh session was still going! :) find
attached the output from dmesg, it says the XFS partition is corrupt, I
am not sure if that is what is causing the crash, or did all those
crashes cause the corruption? I am copying all my files over to a secure
place, and will try to repair the partition (xfs_repair sdb1).
thanx again!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (MingW32)
iD8DBQFHqczJmvTJTpv80GURAoMrAJwJWEkSX/pP2yUAuRv+cBOlr8Ed0wCfUR6q
nZ0xyJPXSc2y03xFcPj2RxI=
=RTwy
-----END PGP SIGNATURE-----
[ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Thu Jan 31
23:33:13 UTC 2008 (Ubuntu 2.6.22-14.51-generic)
[ 0.000000] Command line: root=UUID=ad26f6f9-61ae-414d-8bc3-ec484a74b50d ro
vga=769 splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8060 checksum 0
[ 0.000000] ACPI: RSDP 000F8060, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFB0000, 0034 (r1 A M I OEMRSDT 6000726 MSFT
97)
[ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 A M I OEMFACP 6000726 MSFT
97)
[ 0.000000] ACPI: DSDT 7FFB0450, 5319 (r1 4CDS2 4CDS2121 121 INTL
2002026)
[ 0.000000] ACPI: FACS 7FFC0000, 0040
[ 0.000000] ACPI: APIC 7FFB0390, 0078 (r1 A M I OEMAPIC 6000726 MSFT
97)
[ 0.000000] ACPI: MCFG 7FFB0410, 003C (r1 A M I OEMMCFG 6000726 MSFT
97)
[ 0.000000] ACPI: OEMB 7FFC0040, 0051 (r1 A M I AMI_OEM 6000726 MSFT
97)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ffb0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffb0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524208
[ 0.000000] On node 0 totalpages: 524111
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1125 pages reserved
[ 0.000000] DMA zone: 2818 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7110 pages used for memmap
[ 0.000000] DMA32 zone: 513002 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] Processor #2
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] Processor #3
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000e6000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:7ec00000)
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515820
[ 0.000000] Kernel command line:
root=UUID=ad26f6f9-61ae-414d-8bc3-ec484a74b50d ro vga=769 splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 32.041839] time.c: Detected 2304.267 MHz processor.
[ 32.041891] Console: colour dummy device 80x25
[ 32.041963] Checking aperture...
[ 32.041976] Calgary: detecting Calgary via BIOS EBDA area
[ 32.041978] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 32.068965] Memory: 2055804k/2096832k available (2274k kernel code, 40640k
reserved, 1181k data, 296k init)
[ 32.069025] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4,
Nodes=1
[ 32.147742] Calibrating delay using timer specific routine.. 4611.44
BogoMIPS (lpj=9222893)
[ 32.147780] Security Framework v1.0.0 initialized
[ 32.147790] SELinux: Disabled at boot.
[ 32.147956] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 32.149717] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 32.150543] Mount-cache hash table entries: 256
[ 32.150689] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 32.150696] CPU: L2 cache: 4096K
[ 32.150699] CPU 0/0 -> Node 0
[ 32.150702] using mwait in idle threads.
[ 32.150704] CPU: Physical Processor ID: 0
[ 32.150706] CPU: Processor Core ID: 0
[ 32.150713] CPU0: Thermal monitoring enabled (TM1)
[ 32.150726] SMP alternatives: switching to UP code
[ 32.151018] Early unpacking initramfs... done
[ 32.438357] ACPI: Core revision 20070126
[ 32.438395] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 32.915122] Using local APIC timer interrupts.
[ 32.958485] result 16001841
[ 32.958487] Detected 16.001 MHz APIC timer.
[ 32.959110] SMP alternatives: switching to SMP code
[ 32.959193] Booting processor 1/4 APIC 0x1
[ 32.969941] Initializing CPU#1
[ 33.046970] Calibrating delay using timer specific routine.. 4608.63
BogoMIPS (lpj=9217269)
[ 33.046975] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 33.046977] CPU: L2 cache: 4096K
[ 33.046979] CPU 1/1 -> Node 0
[ 33.046980] CPU: Physical Processor ID: 0
[ 33.046981] CPU: Processor Core ID: 1
[ 33.046987] CPU1: Thermal monitoring enabled (TM1)
[ 33.047415] Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 33.047438] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 33.071021] SMP alternatives: switching to SMP code
[ 33.071092] Booting processor 2/4 APIC 0x2
[ 33.081457] Initializing CPU#2
[ 33.158874] Calibrating delay using timer specific routine.. 4608.73
BogoMIPS (lpj=9217475)
[ 33.158880] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 33.158882] CPU: L2 cache: 4096K
[ 33.158884] CPU 2/2 -> Node 0
[ 33.158885] CPU: Physical Processor ID: 0
[ 33.158886] CPU: Processor Core ID: 2
[ 33.158891] CPU2: Thermal monitoring enabled (TM1)
[ 33.159321] Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 33.159419] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 33.182910] SMP alternatives: switching to SMP code
[ 33.182933] Booting processor 3/4 APIC 0x3
[ 33.193297] Initializing CPU#3
[ 33.270778] Calibrating delay using timer specific routine.. 4608.82
BogoMIPS (lpj=9217654)
[ 33.270784] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 33.270786] CPU: L2 cache: 4096K
[ 33.270788] CPU 3/3 -> Node 0
[ 33.270789] CPU: Physical Processor ID: 0
[ 33.270790] CPU: Processor Core ID: 3
[ 33.270795] CPU3: Thermal monitoring enabled (TM1)
[ 33.271225] Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 33.271259] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 33.294786] Brought up 4 CPUs
[ 34.029730] migration_cost=14,3202
[ 34.029905] NET: Registered protocol family 16
[ 34.029974] ACPI: bus type pci registered
[ 34.029982] PCI: Using configuration type 1
[ 34.031678] ACPI: EC: Look up EC in DSDT
[ 34.036107] ACPI: Interpreter enabled
[ 34.036111] ACPI: (supports S0 S1 S3 S4 S5)
[ 34.036127] ACPI: Using IOAPIC for interrupt routing
[ 34.043015] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 34.043029] PCI: Probing PCI hardware (bus 00)
[ 34.044399] PCI: Transparent bridge - 0000:00:13.1
[ 34.044448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 34.044564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 34.044621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 34.044728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 34.055280] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 34.055293] PCI: Probing PCI hardware (bus 80)
[ 34.055410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 34.055801] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 34.055892] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 34.055981] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 34.056069] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 34.056157] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 34.056251] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 34.056345] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 34.056438] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 34.056516] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 34.056524] pnp: PnP ACPI init
[ 34.056532] ACPI: bus type pnp registered
[ 34.060467] pnp: PnP ACPI: found 15 devices
[ 34.060470] ACPI: ACPI bus type pnp unregistered
[ 34.060508] PCI: Using ACPI for IRQ routing
[ 34.060511] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 34.060519] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 34.060606] NET: Registered protocol family 8
[ 34.060608] NET: Registered protocol family 20
[ 34.060620] PCI-GART: No AMD northbridge found.
[ 34.060658] pnp: 00:08: iomem range 0xfecc0000-0xfecc0fff has been reserved
[ 34.060661] pnp: 00:08: iomem range 0x0-0x0 could not be reserved
[ 34.060666] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 34.060670] pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 34.060676] pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 34.060680] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 34.060683] pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 34.060686] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 34.060690] pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 34.060903] PCI: Bridge: 0000:00:01.0
[ 34.060905] IO window: disabled.
[ 34.060910] MEM window: disabled.
[ 34.060914] PREFETCH window: disabled.
[ 34.060920] PCI: Bridge: 0000:00:02.0
[ 34.060923] IO window: e000-efff
[ 34.060928] MEM window: f6000000-feafffff
[ 34.060933] PREFETCH window: d0000000-dfffffff
[ 34.060938] PCI: Bridge: 0000:00:13.1
[ 34.060940] IO window: disabled.
[ 34.060945] MEM window: disabled.
[ 34.060949] PREFETCH window: disabled.
[ 34.060966] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 34.060981] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) ->
IRQ 27
[ 34.060988] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 34.061000] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 34.061008] NET: Registered protocol family 2
[ 34.062102] Time: tsc clocksource has been installed.
[ 34.094108] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 34.094648] TCP established hash table entries: 262144 (order: 10, 6291456
bytes)
[ 34.097652] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 34.098485] TCP: Hash tables configured (established 262144 bind 65536)
[ 34.098489] TCP reno registered
[ 34.114213] checking if image is initramfs... it is
[ 34.681135] Freeing initrd memory: 7200k freed
[ 34.684861] audit: initializing netlink socket (disabled)
[ 34.684876] audit(1202296460.132:1): initialized
[ 34.686636] VFS: Disk quotas dquot_6.5.1
[ 34.686677] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 34.686742] io scheduler noop registered
[ 34.686744] io scheduler anticipatory registered
[ 34.686747] io scheduler deadline registered
[ 34.686821] io scheduler cfq registered (default)
[ 34.686834] PCI: VIA PCI bridge detected. Disabling DAC.
[ 34.689970] Boot video device is 0000:02:00.0
[ 34.690097] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 34.690136] assign_interrupt_mode Found MSI capability
[ 34.690142] Allocate Port Service[0000:00:02.0:pcie00]
[ 34.690177] Allocate Port Service[0000:00:02.0:pcie02]
[ 34.707308] Real Time Clock Driver v1.12ac
[ 34.707394] Linux agpgart interface v0.102 (c) Dave Jones
[ 34.707397] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 34.707485] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.707598] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 34.708006] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.708553] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 34.708657] input: Macintosh mouse button emulation as /class/input/input0
[ 34.708760] PNP: No PS/2 controller found. Probing ports directly.
[ 34.709085] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.709097] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 34.709247] mice: PS/2 mouse device common for all mice
[ 34.709358] TCP cubic registered
[ 34.709408] NET: Registered protocol family 1
[ 34.709633] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c:
unable to open rtc device (rtc0)
[ 34.709642] Freeing unused kernel memory: 296k freed
[ 34.769071] vesafb: framebuffer at 0xf7000000, mapped to 0xffffc20000b00000,
using 600k, total 14336k
[ 34.769081] vesafb: mode is 640x480x8, linelength=640, pages=10
[ 34.769083] vesafb: scrolling: redraw
[ 34.769086] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 34.769155] Console: switching to colour frame buffer device 80x30
[ 34.807660] fb0: VESA VGA frame buffer device
[ 35.921566] AppArmor: AppArmor initialized<5>audit(1202296461.372:2):
type=1505 info="AppArmor initialized" pid=1328
[ 35.926257] fuse init (API version 7.8)
[ 35.929747] Failure registering capabilities with primary security module.
[ 35.962161] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 35.962331] ACPI: Processor [CPU2] (supports 16 throttling states)
[ 35.962496] ACPI: Processor [CPU3] (supports 16 throttling states)
[ 35.962653] ACPI: Processor [CPU4] (supports 16 throttling states)
[ 36.248331] SCSI subsystem initialized
[ 36.276246] libata version 2.21 loaded.
[ 36.277352] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 36.277420] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 36.277521] eth0: VIA Rhine II at 0x1c000, 00:19:66:39:6a:2e, IRQ 23.
[ 36.278263] eth0: MII PHY found at address 1, status 0x786d advertising 01e1
Link 45e1.
[ 36.280934] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 36.280940] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 36.282264] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 36.282290] VP_IDE: chipset revision 7
[ 36.282291] VP_IDE: not 100% native mode: will probe irqs later
[ 36.282302] VP_IDE: VIA vt8237s (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[ 36.282307] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA,
hdb:pio
[ 36.282316] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio,
hdd:pio
[ 36.282321] Probing IDE interface ide0...
[ 36.295039] usbcore: registered new interface driver usbfs
[ 36.295059] usbcore: registered new interface driver hub
[ 36.295077] usbcore: registered new device driver usb
[ 36.298248] USB Universal Host Controller Interface driver v3.0
[ 36.311971] FDC 0 is a post-1991 82077
[ 37.151434] hda: TSSTcorp CDDVDW SH-S202N, ATAPI CD/DVD-ROM drive
[ 37.827133] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 37.827860] Probing IDE interface ide1...
[ 38.398312] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) ->
IRQ 21
[ 38.399759] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 38.399912] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 1
[ 38.399942] ehci_hcd 0000:00:10.4: debug port 1
[ 38.399954] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf5fffc00
[ 38.399961] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 38.400043] usb usb1: configuration #1 chosen from 1 choice
[ 38.400064] hub 1-0:1.0: USB hub found
[ 38.400068] hub 1-0:1.0: 8 ports detected
[ 38.506298] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 38.506308] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 38.506326] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 2
[ 38.506347] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c480
[ 38.506415] usb usb2: configuration #1 chosen from 1 choice
[ 38.506431] hub 2-0:1.0: USB hub found
[ 38.506435] hub 2-0:1.0: 2 ports detected
[ 38.614110] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) ->
IRQ 22
[ 38.614117] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 38.614131] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 3
[ 38.614153] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c800
[ 38.614224] usb usb3: configuration #1 chosen from 1 choice
[ 38.614241] hub 3-0:1.0: USB hub found
[ 38.614245] hub 3-0:1.0: 2 ports detected
[ 38.721996] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) ->
IRQ 21
[ 38.722003] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 38.722017] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 4
[ 38.722035] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c880
[ 38.722103] usb usb4: configuration #1 chosen from 1 choice
[ 38.722121] hub 4-0:1.0: USB hub found
[ 38.722125] hub 4-0:1.0: 2 ports detected
[ 38.829897] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) ->
IRQ 23
[ 38.829903] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 38.829917] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 5
[ 38.829939] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000cc00
[ 38.830005] usb usb5: configuration #1 chosen from 1 choice
[ 38.830023] hub 5-0:1.0: USB hub found
[ 38.830028] hub 5-0:1.0: 2 ports detected
[ 38.939404] sata_via 0000:00:0f.0: version 2.2
[ 38.939421] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) ->
IRQ 21
[ 38.939449] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 38.939542] scsi0 : sata_via
[ 38.939570] scsi1 : sata_via
[ 38.939738] ata1: SATA max UDMA/133 cmd 0x000000000001dc00 ctl
0x000000000001d882 bmdma 0x000000000001d400 irq 21
[ 38.939741] ata2: SATA max UDMA/133 cmd 0x000000000001d800 ctl
0x000000000001d482 bmdma 0x000000000001d408 irq 21
[ 38.945683] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB
Cache<4>hda: drive side 80-wire cable detection failed, limiting max speed to
UDMA33
[ 38.945691]
[ 38.945692] Uniform CD-ROM driver Revision: 3.20
[ 39.145562] ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[ 39.173536] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 39.317481] usb 1-3: configuration #1 chosen from 1 choice
[ 39.333717] ata1.00: ATA-8: SAMSUNG HD403LJ, CT100-11, max UDMA7
[ 39.333720] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 39.345676] ata1.00: configured for UDMA/133
[ 39.553197] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 39.564041] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10
PQ: 0 ANSI: 5
[ 39.567784] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
[ 39.567793] sd 0:0:0:0: [sda] Write Protect is off
[ 39.567795] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.567806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 39.567841] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
[ 39.567848] sd 0:0:0:0: [sda] Write Protect is off
[ 39.567849] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.567859] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 39.567863] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 39.652024] sd 0:0:0:0: [sda] Attached SCSI disk
[ 39.654917] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 39.745021] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 39.848100] Attempting manual resume
[ 39.848103] swsusp: Resume From Partition 8:6
[ 39.848104] PM: Checking swsusp image.
[ 39.848293] PM: Resume from disk failed.
[ 39.855429] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 39.855758] SGI XFS Quota Management subsystem
[ 39.882882] XFS mounting filesystem sda2
[ 39.927195] usb 2-1: configuration #1 chosen from 1 choice
[ 39.961306] Starting XFS recovery on filesystem: sda2 (logdev: internal)
[ 40.172635] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 40.351803] usb 2-2: configuration #1 chosen from 1 choice
[ 40.354896] usbcore: registered new interface driver libusual
[ 40.357456] Initializing USB Mass Storage driver...
[ 40.725752] Ending XFS recovery on filesystem: sda2 (logdev: internal)
[ 40.979916] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 41.149994] usb 4-2: configuration #1 chosen from 1 choice
[ 41.411578] usbcore: registered new interface driver hiddev
[ 41.411622] scsi2 : SCSI emulation for USB Mass Storage devices
[ 41.411667] usb-storage: device found at 4
[ 41.411671] usb-storage: waiting for device to settle before scanning
[ 41.411688] usbcore: registered new interface driver usb-storage
[ 41.411691] USB Mass Storage support registered.
[ 41.425987] input: USB-compliant keyboard as /class/input/input1
[ 41.425995] input: USB HID v1.10 Keyboard [USB-compliant keyboard] on
usb-0000:00:10.0-2
[ 41.451099] input: USB-compliant keyboard as /class/input/input2
[ 41.451137] input,hiddev96: USB HID v1.10 Mouse [USB-compliant keyboard] on
usb-0000:00:10.0-2
[ 41.463786] input: PS/2+USB Mouse as /class/input/input3
[ 41.463798] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:10.2-2
[ 41.463804] usbcore: registered new interface driver usbhid
[ 41.463807]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 46.407279] usb-storage: device scan complete
[ 46.442618] scsi 2:0:0:0: Direct-Access WD 5000AAKB Externa l108
PQ: 0 ANSI: 0
[ 46.443725] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 46.444603] sd 2:0:0:0: [sdb] Write Protect is off
[ 46.444605] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 46.444606] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 46.705566] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 46.735136] sd 2:0:0:0: [sdb] Write Protect is off
[ 46.735139] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 46.735141] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 46.735145] sdb: sdb1
[ 46.736481] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 46.736521] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 47.615414] agpgart: Detected VIA PT880 Ultra chipset
[ 47.620665] agpgart: AGP aperture is 64M @ 0xf8000000
[ 47.656684] input: PC Speaker as /class/input/input4
[ 47.674654] parport_pc 00:06: reported by Plug and Play ACPI
[ 47.674765] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 47.751581] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 47.794403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 47.961247] lirc_dev: IR Remote Control driver registered, at major 61
[ 47.977136] lirc_mod_mce: no version for "lirc_get_pdata" found: kernel
tainted.
[ 47.977447]
[ 47.977448] lirc_mod_mce: Input driver for Microsoft MCE 2005 keyboard v0.1.3
[ 47.977450] lirc_mod_mce: Florian Demski
[ 48.059983] irda_init()
[ 48.059995] NET: Registered protocol family 23
[ 48.093613] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[ 48.244006] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 48.244075] input: Philips eHome Infrared Transceiver as /class/input/input5
[ 48.247805] lirc_mod_mce[2]: Philips eHome Infrared Transceiver on usb2:2
[ 48.247830] usbcore: registered new interface driver lirc_mod_mce
[ 48.408477] nvidia: module license 'NVIDIA' taints kernel.
[ 48.662536] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) ->
IRQ 24
[ 48.662552] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 48.662663] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.07 Thu Dec
13 18:34:01 PST 2007
[ 48.931883] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 48.933331] PCI: Setting latency timer of device 0000:80:01.0 to 64
[ 50.071808] hda_intel: azx_get_response timeout, switching to polling mode...
[ 51.074913] hda_intel: azx_get_response timeout, switching to single_cmd
mode...
[ 51.234883] hda_codec: Unknown model for ALC883, trying auto-probe from
BIOS...
[ 51.888521] lp0: using parport0 (interrupt-driven).
[ 51.959677] Adding 2441840k swap on /dev/sda6. Priority:-1 extents:1
across:2441840k
[ 53.039563] XFS mounting filesystem sda5
[ 53.109934] Starting XFS recovery on filesystem: sda5 (logdev: internal)
[ 53.272804] Ending XFS recovery on filesystem: sda5 (logdev: internal)
[ 53.371451] kjournald starting. Commit interval 5 seconds
[ 53.371616] EXT3 FS on sda7, internal journal
[ 53.371621] EXT3-fs: mounted filesystem with ordered data mode.
[ 53.753725] XFS mounting filesystem sdb1
[ 53.875065] Starting XFS recovery on filesystem: sdb1 (logdev: internal)
[ 54.173449] Ending XFS recovery on filesystem: sdb1 (logdev: internal)
[ 57.125542] No dock devices found.
[ 57.156869] input: Power Button (FF) as /class/input/input6
[ 57.157002] ACPI: Power Button (FF) [PWRF]
[ 57.157670] input: Sleep Button (CM) as /class/input/input7
[ 57.157819] ACPI: Sleep Button (CM) [SLPB]
[ 57.158480] input: Power Button (CM) as /class/input/input8
[ 57.158617] ACPI: Power Button (CM) [PWRB]
[ 58.457271] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 58.467087] NET: Registered protocol family 10
[ 58.467169] lo: Disabled Privacy Extensions
[ 59.196874] ppdev: user-space parallel port driver
[ 59.301164] audit(1202296485.576:3): type=1503 operation="inode_permission"
requested_mask="a" denied_mask="a" name="/dev/tty" pid=5848
profile="/usr/sbin/cupsd"
[ 62.137475] sirdev_get_instance - ttyS1
[ 62.137591] irtty_open - ttyS1: irda line discipline opened
[ 63.146017] irlap_change_speed(), setting speed to 9600
[ 63.345657] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 63.443501] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 63.457947] NFSD: starting 90-second grace period
[ 66.035266] Failure registering capabilities with primary security module.
[ 70.802976] NET: Registered protocol family 17
[ 83.398098] eth0: no IPv6 routers present
[ 7028.242956] hda-intel: Invalid position buffer, using LPIB read method
instead.
[ 9657.888162] ehci_hcd 0000:00:10.4: fatal error
[ 9657.888171] ehci_hcd 0000:00:10.4: HC died; cleaning up
[ 9657.888181] usb 1-3: USB disconnect, address 4
[ 9657.888750] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_OK
[ 9657.888754] end_request: I/O error, dev sdb, sector 221536031
[ 9657.888763] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_OK
[ 9657.888765] end_request: I/O error, dev sdb, sector 221536047
[ 9657.889376] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xb870ec0 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.889965] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x161abc0 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.890157] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xd385650 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.890326] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x86c01b0 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.890518] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xc4a33b0 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.890638] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x16142450 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.890969] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x19be7790 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.891120] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x7e0b0 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.891332] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x18075cf0 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.891449] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x1ef2ba70 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.891565] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xd7599d0 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.891681] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xe2fc8c0 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.891822] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x114dc5f8 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.891942] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x8742770 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.892367] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.892768] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.892921] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.893033] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.893296] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.893446] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.893597] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.893998] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894111] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894280] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894338] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894392] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894447] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894499] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894553] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894569] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894585] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894601] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894654] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf63d020 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894708] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x1423550 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894735] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x2876e1c8 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.894756] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x24a49fe0 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.894785] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x2a44b5c0 ("xfs_trans_read_buf") error 5 buf count 4096
[ 9657.902206] Buffer I/O error on device sdb1, logical block 38728936
[ 9657.902211] lost page write due to I/O error on sdb1
[ 9657.902217] Buffer I/O error on device sdb1, logical block 38728937
[ 9657.902218] lost page write due to I/O error on sdb1
[ 9657.902222] Buffer I/O error on device sdb1, logical block 38728938
[ 9657.902224] lost page write due to I/O error on sdb1
[ 9657.902227] Buffer I/O error on device sdb1, logical block 38728939
[ 9657.902228] lost page write due to I/O error on sdb1
[ 9657.902231] Buffer I/O error on device sdb1, logical block 38728940
[ 9657.902233] lost page write due to I/O error on sdb1
[ 9657.902236] Buffer I/O error on device sdb1, logical block 38728941
[ 9657.902238] lost page write due to I/O error on sdb1
[ 9657.902241] Buffer I/O error on device sdb1, logical block 38728942
[ 9657.902243] lost page write due to I/O error on sdb1
[ 9657.902246] Buffer I/O error on device sdb1, logical block 38728943
[ 9657.902248] lost page write due to I/O error on sdb1
[ 9657.902251] Buffer I/O error on device sdb1, logical block 38728944
[ 9657.902253] lost page write due to I/O error on sdb1
[ 9657.902256] Buffer I/O error on device sdb1, logical block 38728945
[ 9657.902258] lost page write due to I/O error on sdb1
[ 9657.910903] Device sdb1, XFS metadata write error block 0x1f7b69b0 in sdb1
[ 9657.910922] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0x2bf3a50 ("xfs_trans_read_buf") error 5 buf count 8192
[ 9657.946258] I/O error in filesystem ("sdb1") meta-data dev sdb1 block
0xf5f7f1d ("xlog_iodone") error 5 buf count 5632
[ 9657.946264] xfs_force_shutdown(sdb1,0x2) called from line 960 of file
/build/buildd/linux-source-2.6.22-2.6.22/fs/xfs/xfs_log.c. Return address =
0xffffffff881b48d5
[ 9657.946277] Filesystem "sdb1": Log I/O Error Detected. Shutting down
filesystem: sdb1
[ 9657.946280] Please umount the filesystem, and rectify the problem(s)
[ 9657.946285] xfs_force_shutdown(sdb1,0x1) called from line 423 of file
/build/buildd/linux-source-2.6.22-2.6.22/fs/xfs/xfs_rw.c. Return address =
0xffffffff881cc63e
[ 9657.946290] xfs_force_shutdown(sdb1,0x1) called from line 423 of file
/build/buildd/linux-source-2.6.22-2.6.22/fs/xfs/xfs_rw.c. Return address =
0xffffffff881cc63e
[ 9658.245865] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 9658.392740] usb 3-1: not running at top speed; connect to a high speed hub
[ 9658.416806] usb 3-1: configuration #1 chosen from 1 choice
[ 9658.419799] scsi3 : SCSI emulation for USB Mass Storage devices
[ 9658.419853] usb-storage: device found at 2
[ 9658.419858] usb-storage: waiting for device to settle before scanning
[ 9663.418386] usb-storage: device scan complete
[ 9663.454314] scsi 3:0:0:0: Direct-Access WD 5000AAKB Externa l108
PQ: 0 ANSI: 0
[ 9663.459291] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[ 9663.464286] sd 3:0:0:0: [sdc] Write Protect is off
[ 9663.464289] sd 3:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 9663.464292] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 9663.469310] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[ 9663.474275] sd 3:0:0:0: [sdc] Write Protect is off
[ 9663.474278] sd 3:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 9663.474281] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 9663.474285] sdc: sdc1
[ 9663.489317] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 9663.489349] sd 3:0:0:0: Attached scsi generic sg1 type 0
--
ubuntu-uk@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-uk
https://wiki.kubuntu.org/UKTeam/
