On 16/12/06, David Pashley <[EMAIL PROTECTED]> wrote:
> Run "ip link"
OK:
[EMAIL PROTECTED]:~$ ip link
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:13:d3:cd:a6:fa brd ff:ff:ff:ff:ff:ff
3: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
> "ip addr show dev eth0"
> The line you're interested in here is the line that starts inet. If you
> don't or it starts 169.254 then you don't have an ip address assigned.
[EMAIL PROTECTED]:~$ ip addr show dev eth0
2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:13:d3:cd:a6:fa brd ff:ff:ff:ff:ff:ff
inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0
inet6 fe80::213:d3ff:fecd:a6fa/64 scope link
valid_lft forever preferred_lft forever
Think that's all ok on the network front. What should I check next?
Thanks for all this help.
--
Dave Briggs
--
ubuntu-uk@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-uk
https://wiki.kubuntu.org/UKTeam/
