mav...@caspermini:~$ lspci 00:00.0 Host bridge: Intel Corporation Pineview DMI Bridge 00:02.0 VGA compatible controller: Intel Corporation Pineview Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation Pineview Integrated Graphics Controller 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) mav...@caspermini:~$
mav...@caspermini:~$ dmesg [ 0.221920] pci 0000:02:00.0: reg 14 32bit mmio: [0x92000000-0x92003fff] [ 0.222005] pci 0000:02:00.0: supports D1 D2 [ 0.222010] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.222019] pci 0000:02:00.0: PME# disabled [ 0.222109] pci 0000:00:1c.1: bridge io port: [0x1000-0x1fff] [ 0.222118] pci 0000:00:1c.1: bridge 32bit mmio: [0x92000000-0x92ffffff] [ 0.222130] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x91000000-0x91ffffff] [ 0.222208] pci 0000:00:1e.0: transparent bridge [ 0.222247] pci_bus 0000:00: on NUMA node 0 [ 0.222261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.222605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.222852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.223038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.223414] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.223428] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS [ 0.234318] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.234569] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.234816] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.235061] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.235308] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.235557] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.235805] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.236076] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.236484] SCSI subsystem initialized [ 0.236564] libata version 3.00 loaded. [ 0.236564] usbcore: registered new interface driver usbfs [ 0.236564] usbcore: registered new interface driver hub [ 0.236564] usbcore: registered new device driver usb [ 0.236564] ACPI: WMI: Mapper loaded [ 0.236564] PCI: Using ACPI for IRQ routing [ 0.248021] Bluetooth: Core ver 2.15 [ 0.248067] NET: Registered protocol family 31 [ 0.248067] Bluetooth: HCI device and connection manager initialized [ 0.248067] Bluetooth: HCI socket layer initialized [ 0.248067] NetLabel: Initializing [ 0.248067] NetLabel: domain hash size = 128 [ 0.248067] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.248077] NetLabel: unlabeled traffic allowed by default [ 0.248144] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.248155] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.264024] pnp: PnP ACPI init [ 0.264060] ACPI: bus type pnp registered [ 0.268522] pnp: PnP ACPI: found 9 devices [ 0.268528] ACPI: ACPI bus type pnp unregistered [ 0.268535] PnPBIOS: Disabled by ACPI PNP [ 0.268560] system 00:01: ioport range 0x600-0x60f has been reserved [ 0.268567] system 00:01: ioport range 0x610-0x610 has been reserved [ 0.268573] system 00:01: ioport range 0x800-0x80f has been reserved [ 0.268580] system 00:01: ioport range 0x810-0x817 has been reserved [ 0.268587] system 00:01: ioport range 0x400-0x47f has been reserved [ 0.268594] system 00:01: ioport range 0x500-0x53f has been reserved [ 0.268600] system 00:01: ioport range 0x380-0x381 has been reserved [ 0.268610] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.268618] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.268626] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.268633] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.268641] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.268648] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.268656] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.303521] AppArmor: AppArmor Filesystem Enabled [ 0.303587] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.303596] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.303606] pci 0000:00:1c.0: MEM window: 0x93000000-0x93ffffff [ 0.303615] pci 0000:00:1c.0: PREFETCH window: 0x00000090000000-0x00000090ffffff [ 0.303627] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.303634] pci 0000:00:1c.1: IO window: 0x1000-0x1fff [ 0.303643] pci 0000:00:1c.1: MEM window: 0x92000000-0x92ffffff [ 0.303653] pci 0000:00:1c.1: PREFETCH window: 0x00000091000000-0x00000091ffffff [ 0.303665] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.303669] pci 0000:00:1e.0: IO window: disabled [ 0.303678] pci 0000:00:1e.0: MEM window: disabled [ 0.303686] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.303707] alloc irq_desc for 16 on node -1 [ 0.303713] alloc kstat_irqs on node -1 [ 0.303724] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.303734] pci 0000:00:1c.0: setting latency timer to 64 [ 0.303749] alloc irq_desc for 17 on node -1 [ 0.303753] alloc kstat_irqs on node -1 [ 0.303761] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.303770] pci 0000:00:1c.1: setting latency timer to 64 [ 0.303784] pci 0000:00:1e.0: setting latency timer to 64 [ 0.303793] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.303799] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.303805] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.303811] pci_bus 0000:01: resource 1 mem: [0x93000000-0x93ffffff] [ 0.303818] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x90ffffff] [ 0.303824] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.303830] pci_bus 0000:02: resource 1 mem: [0x92000000-0x92ffffff] [ 0.303837] pci_bus 0000:02: resource 2 pref mem [0x91000000-0x91ffffff] [ 0.303843] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.303849] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.303917] NET: Registered protocol family 2 [ 0.304130] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.304741] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.305671] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.306101] TCP: Hash tables configured (established 131072 bind 65536) [ 0.306108] TCP reno registered [ 0.306320] NET: Registered protocol family 1 [ 0.306440] Trying to unpack rootfs image as initramfs... [ 0.501084] Switched to high resolution mode on CPU 1 [ 0.504021] Switched to high resolution mode on CPU 0 [ 0.652998] Freeing initrd memory: 7462k freed [ 0.658622] Simple Boot Flag at 0x44 set to 0x1 [ 0.658987] cpufreq-nforce2: No nForce2 chipset. [ 0.659046] Scanning for low memory corruption every 60 seconds [ 0.659247] audit: initializing netlink socket (disabled) [ 0.659274] type=2000 audit(1280072447.656:1): initialized [ 0.677785] highmem bounce pool size: 64 pages [ 0.677799] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.680922] VFS: Disk quotas dquot_6.5.2 [ 0.681051] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.682263] fuse init (API version 7.12) [ 0.682453] msgmni has been set to 1706 [ 0.682900] alg: No test for stdrng (krng) [ 0.682933] io scheduler noop registered [ 0.682938] io scheduler anticipatory registered [ 0.682942] io scheduler deadline registered [ 0.683043] io scheduler cfq registered (default) [ 0.683067] pci 0000:00:02.0: Boot video device [ 0.700248] alloc irq_desc for 24 on node -1 [ 0.700255] alloc kstat_irqs on node -1 [ 0.700274] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.700291] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.700533] alloc irq_desc for 25 on node -1 [ 0.700538] alloc kstat_irqs on node -1 [ 0.700553] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.700569] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.700743] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.700952] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.700967] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS [ 0.701231] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.701245] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS [ 0.701532] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.701546] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS [ 0.701795] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.701809] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS [ 0.701912] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.703032] ACPI: AC Adapter [ACAD] (on-line) [ 0.703171] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.703179] ACPI: Power Button [PWRF] [ 0.703275] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.703282] ACPI: Power Button [PWRB] [ 0.703376] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.703383] ACPI: Sleep Button [SLPB] [ 0.703470] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 0.704370] ACPI: Lid Switch [LID0] [ 0.705646] ACPI: SSDT 7e252c90 001F7 (v02 CASPER ERA 00003000 INTL 20051117) [ 0.706486] ACPI: SSDT 7e251e10 001C1 (v02 CASPER ERA 00003001 INTL 20051117) [ 0.708034] Marking TSC unstable due to TSC halts in idle [ 0.708075] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.708136] processor LNXCPU:00: registered as cooling_device0 [ 0.708906] ACPI: SSDT 7e252f10 000D0 (v02 CASPER ERA 00003000 INTL 20051117) [ 0.709671] ACPI: SSDT 7e250f10 00083 (v02 CASPER ERA 00003000 INTL 20051117) [ 0.711317] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.711361] processor LNXCPU:01: registered as cooling_device1 [ 0.718605] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.718623] ACPI: Thermal Zone [TZ01] (64 C) [ 0.718732] isapnp: Scanning for PnP cards... [ 0.783449] ACPI: Battery Slot [BAT0] (battery present) [ 1.072791] isapnp: No Plug & Play device found [ 1.075486] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.078049] brd: module loaded [ 1.079031] loop: module loaded [ 1.079195] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.079355] ahci 0000:00:1f.2: version 3.0 [ 1.079381] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.079445] alloc irq_desc for 26 on node -1 [ 1.079450] alloc kstat_irqs on node -1 [ 1.079469] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X [ 1.079525] ahci: SSS flag set, parallel bus scan disabled [ 1.079567] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 1.079575] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part [ 1.079584] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.079822] scsi0 : ahci [ 1.080054] scsi1 : ahci [ 1.080186] scsi2 : ahci [ 1.080335] scsi3 : ahci [ 1.080731] ata1: SATA max UDMA/133 abar m1...@0x94204000 port 0x94204100 irq 26 [ 1.080737] ata2: DUMMY [ 1.080741] ata3: DUMMY [ 1.080744] ata4: DUMMY [ 1.082592] Fixed MDIO Bus: probed [ 1.082672] PPP generic driver version 2.4.2 [ 1.082878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.082921] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.082950] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.082957] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.083021] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.083031] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.086973] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.086984] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.087014] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400 [ 1.100031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.100185] usb usb1: configuration #1 chosen from 1 choice [ 1.100247] hub 1-0:1.0: USB hub found [ 1.100264] hub 1-0:1.0: 8 ports detected [ 1.100388] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.100428] uhci_hcd: USB Universal Host Controller Interface driver [ 1.100493] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.100528] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.100537] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.100609] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.100648] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 [ 1.100813] usb usb2: configuration #1 chosen from 1 choice [ 1.100872] hub 2-0:1.0: USB hub found [ 1.100886] hub 2-0:1.0: 2 ports detected [ 1.100972] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.100984] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.100991] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.101051] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.101100] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003060 [ 1.101263] usb usb3: configuration #1 chosen from 1 choice [ 1.101321] hub 3-0:1.0: USB hub found [ 1.101334] hub 3-0:1.0: 2 ports detected [ 1.101418] alloc irq_desc for 18 on node -1 [ 1.101423] alloc kstat_irqs on node -1 [ 1.101443] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.101454] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.101461] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.101524] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.101571] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 [ 1.101732] usb usb4: configuration #1 chosen from 1 choice [ 1.101789] hub 4-0:1.0: USB hub found [ 1.101803] hub 4-0:1.0: 2 ports detected [ 1.101884] alloc irq_desc for 19 on node -1 [ 1.101889] alloc kstat_irqs on node -1 [ 1.101899] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.101910] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.101917] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.101986] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.102033] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020 [ 1.102194] usb usb5: configuration #1 chosen from 1 choice [ 1.102251] hub 5-0:1.0: USB hub found [ 1.102265] hub 5-0:1.0: 2 ports detected [ 1.102442] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 1.110013] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.110027] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.110148] mice: PS/2 mouse device common for all mice [ 1.110405] rtc_cmos 00:03: RTC can wake from S4 [ 1.110474] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.110515] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.110754] device-mapper: uevent: version 1.0.3 [ 1.110984] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 1.111172] device-mapper: multipath: version 1.1.0 loaded [ 1.111179] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.111463] EISA: Probing bus 0 at eisa.0 [ 1.111474] Cannot allocate resource for EISA slot 1 [ 1.111479] Cannot allocate resource for EISA slot 2 [ 1.111484] Cannot allocate resource for EISA slot 3 [ 1.111510] EISA: Detected 0 cards. [ 1.111904] cpuidle: using governor ladder [ 1.112149] cpuidle: using governor menu [ 1.113294] TCP cubic registered [ 1.113683] NET: Registered protocol family 10 [ 1.114644] lo: Disabled Privacy Extensions [ 1.114941] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.115511] NET: Registered protocol family 17 [ 1.115556] Bluetooth: L2CAP ver 2.13 [ 1.115562] Bluetooth: L2CAP socket layer initialized [ 1.115569] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.115574] Bluetooth: SCO socket layer initialized [ 1.116313] Bluetooth: RFCOMM TTY layer initialized [ 1.116323] Bluetooth: RFCOMM socket layer initialized [ 1.116329] Bluetooth: RFCOMM ver 1.11 [ 1.118028] Using IPI No-Shortcut mode [ 1.118179] PM: Resume from disk failed. [ 1.118202] registered taskstats version 1 [ 1.118434] Magic number: 2:608:690 [ 1.118475] mem mem: hash matches [ 1.118556] rtc_cmos 00:03: setting system clock to 2010-07-25 15:40:48 UTC (1280072448) [ 1.118564] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.118569] EDD information not available. [ 1.400123] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.401270] ACPI Warning: \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940 [ 1.401287] ata1.00: _GTF unexpected object type 0x1 [ 1.401461] ata1.00: ATA-8: WDC WD2500BEVT-00A23T0, 01.01A01, max UDMA/133 [ 1.401473] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.402757] ata1.00: _GTF unexpected object type 0x1 [ 1.402997] ata1.00: configured for UDMA/133 [ 1.412128] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.416807] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 01.0 PQ: 0 ANSI: 5 [ 1.417092] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.417208] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.417339] sd 0:0:0:0: [sda] Write Protect is off [ 1.417346] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.417415] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.417741] sda: sda1 sda2 sda3 < sda5 sda6 [ 1.500059] Clocksource tsc unstable (delta = -216885886 ns) [ 1.511348] sda7 > [ 1.512158] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.512205] Freeing unused kernel memory: 544k freed [ 1.512680] Write protecting the kernel text: 4584k [ 1.512761] Write protecting the kernel read-only data: 1844k [ 1.547029] usb 1-1: configuration #1 chosen from 1 choice [ 1.664116] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.843783] usb 1-2: configuration #1 chosen from 1 choice [ 1.845050] Linux agpgart interface v0.103 [ 1.855690] agpgart-intel 0000:00:00.0: Intel IGD Chipset [ 1.856212] agpgart-intel 0000:00:00.0: detected 8188K stolen memory [ 1.859793] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 2.019749] [drm] Initialized drm 1.1.0 20060810 [ 2.040105] usb 1-8: new high speed USB device using ehci_hcd and address 5 [ 2.055506] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.055516] i915 0000:00:02.0: setting latency timer to 64 [ 2.062115] alloc irq_desc for 27 on node -1 [ 2.062125] alloc kstat_irqs on node -1 [ 2.062143] i915 0000:00:02.0: irq 27 for MSI/MSI-X [ 2.072864] Initializing USB Mass Storage driver... [ 2.073120] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.073346] usbcore: registered new interface driver usb-storage [ 2.073355] USB Mass Storage support registered. [ 2.073632] usb-storage: device found at 2 [ 2.073638] usb-storage: waiting for device to settle before scanning [ 2.228762] usb 1-8: configuration #1 chosen from 1 choice [ 2.291252] [drm] fb0: inteldrmfb frame buffer device [ 2.298969] acpi device:24: registered as cooling_device2 [ 2.299849] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:22/input/input6 [ 2.299950] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 2.300004] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.468557] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 2.566541] [drm] Big FIFO is enabled [ 2.628430] [drm] Big FIFO is enabled [ 2.628447] [drm] LVDS-8: set mode 1024x600 e [ 2.628553] [drm] Big FIFO is enabled [ 2.650367] usb 3-1: configuration #1 chosen from 1 choice [ 2.684146] usbcore: registered new interface driver hiddev [ 2.697736] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7 [ 2.697931] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 2.697970] usbcore: registered new interface driver usbhid [ 2.697977] usbhid: v2.6:USB HID core driver [ 2.990079] [drm] Big FIFO is enabled [ 3.017131] Console: switching to colour frame buffer device 128x37 [ 3.531717] PM: Starting manual resume from disk [ 3.531726] PM: Resume from partition 8:6 [ 3.531730] PM: Checking hibernation image. [ 3.532062] PM: Resume from disk failed. [ 3.564420] EXT4-fs (sda7): barriers enabled [ 3.578626] kjournald2 starting: pid 381, dev sda7:8, commit interval 5 seconds [ 3.578804] EXT4-fs (sda7): delayed allocation enabled [ 3.578812] EXT4-fs: file extents enabled [ 3.581691] EXT4-fs: mballoc enabled [ 3.581723] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 4.271683] type=1505 audit(1280072451.649:2): operation="profile_load" pid=406 name=/sbin/dhclient3 [ 4.272263] type=1505 audit(1280072451.649:3): operation="profile_load" pid=406 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.272592] type=1505 audit(1280072451.653:4): operation="profile_load" pid=406 name=/usr/lib/connman/scripts/dhclient-script [ 4.303395] type=1505 audit(1280072451.682:5): operation="profile_load" pid=407 name=/usr/bin/evince [ 4.311677] type=1505 audit(1280072451.689:6): operation="profile_load" pid=407 name=/usr/bin/evince-previewer [ 4.316810] type=1505 audit(1280072451.697:7): operation="profile_load" pid=407 name=/usr/bin/evince-thumbnailer [ 4.354348] type=1505 audit(1280072451.733:8): operation="profile_load" pid=409 name=/usr/lib/cups/backend/cups-pdf [ 4.355037] type=1505 audit(1280072451.733:9): operation="profile_load" pid=409 name=/usr/sbin/cupsd [ 5.235069] Adding 4000144k swap on /dev/sda6. Priority:-1 extents:1 across:4000144k [ 6.044961] udev: starting version 147 [ 6.915300] usbcore: registered new interface driver usbserial [ 6.915358] USB Serial support registered for generic [ 6.915501] usbcore: registered new interface driver usbserial_generic [ 6.915509] usbserial: USB Serial Driver core [ 6.986949] USB Serial support registered for GSM modem (1-port) [ 6.987079] option 1-1:1.0: GSM modem (1-port) converter detected [ 6.987268] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 6.987329] option 1-1:1.1: GSM modem (1-port) converter detected [ 6.987503] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 6.987571] option 1-1:1.3: GSM modem (1-port) converter detected [ 6.987759] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 6.987857] usbcore: registered new interface driver option [ 6.987863] option: v0.7.2:USB Driver for GSM modems [ 6.994676] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.994699] atl1c 0000:01:00.0: setting latency timer to 64 [ 6.994798] atl1c 0000:01:00.0: PME# disabled [ 6.994812] atl1c 0000:01:00.0: PME# disabled [ 7.072781] usb-storage: device scan complete [ 7.073546] scsi 4:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 7.074488] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 7.083389] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 7.110477] atl1c 0000:01:00.0: version 1.0.0.1-NAPI [ 7.144253] Linux video capture interface: v2.00 [ 7.275001] lp: driver loaded but no devices found [ 7.304736] uvcvideo: Found UVC 1.00 device USB Webcam (0408:03e0) [ 7.331219] input: USB Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8 [ 7.331323] usbcore: registered new interface driver uvcvideo [ 7.331330] USB Video Class driver (v0.1.0) [ 7.557332] psmouse serio1: ID: 10 00 64 [ 7.591759] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.186083] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input9 [ 8.756578] EXT4-fs (sda7): internal journal on sda7:8 [ 8.949955] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.950014] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.170167] hda_codec: Unknown model for ALC272, trying auto-probe from BIOS... [ 9.171099] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 9.663185] EXT4-fs (sda5): barriers enabled [ 9.663532] kjournald2 starting: pid 757, dev sda5:8, commit interval 5 seconds [ 9.717704] EXT4-fs (sda5): internal journal on sda5:8 [ 9.717719] EXT4-fs (sda5): delayed allocation enabled [ 9.717728] EXT4-fs: file extents enabled [ 9.760274] EXT4-fs: mballoc enabled [ 9.760312] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 10.938160] __ratelimit: 3 callbacks suppressed [ 10.938171] type=1505 audit(1280061658.317:11): operation="profile_replace" pid=827 name=/sbin/dhclient3 [ 10.938962] type=1505 audit(1280061658.317:12): operation="profile_replace" pid=827 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.939417] type=1505 audit(1280061658.317:13): operation="profile_replace" pid=827 name=/usr/lib/connman/scripts/dhclient-script [ 10.951805] type=1505 audit(1280061658.329:14): operation="profile_replace" pid=828 name=/usr/bin/evince [ 10.964560] type=1505 audit(1280061658.345:15): operation="profile_replace" pid=828 name=/usr/bin/evince-previewer [ 10.971618] type=1505 audit(1280061658.349:16): operation="profile_replace" pid=828 name=/usr/bin/evince-thumbnailer [ 10.982397] type=1505 audit(1280061658.361:17): operation="profile_replace" pid=830 name=/usr/lib/cups/backend/cups-pdf [ 10.983084] type=1505 audit(1280061658.361:18): operation="profile_replace" pid=830 name=/usr/sbin/cupsd [ 10.988319] type=1505 audit(1280061658.365:19): operation="profile_replace" pid=831 name=/usr/sbin/tcpdump [ 14.887989] ppdev: user-space parallel port driver [ 16.083337] alloc irq_desc for 28 on node -1 [ 16.083348] alloc kstat_irqs on node -1 [ 16.083379] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X [ 16.084285] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.987417] CPU0 attaching NULL sched-domain. [ 18.987428] CPU1 attaching NULL sched-domain. [ 19.000660] CPU0 attaching sched-domain: [ 19.000669] domain 0: span 0-1 level SIBLING [ 19.000675] groups: 0 1 [ 19.000686] CPU1 attaching sched-domain: [ 19.000691] domain 0: span 0-1 level SIBLING [ 19.000697] groups: 1 0 [ 27.907274] CPU0 attaching NULL sched-domain. [ 27.907285] CPU1 attaching NULL sched-domain. [ 27.920181] CPU0 attaching sched-domain: [ 27.920190] domain 0: span 0-1 level SIBLING [ 27.920197] groups: 0 1 [ 27.920208] CPU1 attaching sched-domain: [ 27.920213] domain 0: span 0-1 level SIBLING [ 27.920218] groups: 1 0 [ 39.342652] CPU0 attaching NULL sched-domain. [ 39.342666] CPU1 attaching NULL sched-domain. [ 39.356173] CPU0 attaching sched-domain: [ 39.356185] domain 0: span 0-1 level SIBLING [ 39.356194] groups: 0 1 [ 39.356210] CPU1 attaching sched-domain: [ 39.356218] domain 0: span 0-1 level SIBLING [ 39.356226] groups: 1 0 [ 40.676303] CPU0 attaching NULL sched-domain. [ 40.676318] CPU1 attaching NULL sched-domain. [ 40.693973] CPU0 attaching sched-domain: [ 40.693986] domain 0: span 0-1 level SIBLING [ 40.693994] groups: 0 1 [ 40.694008] CPU1 attaching sched-domain: [ 40.694015] domain 0: span 0-1 level SIBLING [ 40.694021] groups: 1 0 [ 194.303330] Disabling lock debugging due to kernel taint [ 194.323248] ndiswrapper version 1.55 loaded (smp=yes, preempt=no) [ 194.368963] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'IoWMIQueryAllData' [ 194.368996] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'IoWMIOpenBlock' [ 194.369871] ndiswrapper (load_sys_files:206): couldn't prepare driver 'net8192se' [ 194.371216] ndiswrapper (load_wrap_driver:108): couldn't load driver net8192se; check system log for messages from 'loadndisdriver' [ 194.379180] usbcore: registered new interface driver ndiswrapper [ 223.209597] PPP BSD Compression module registered [ 223.224079] PPP Deflate Compression module registered [ 458.327930] CPU0 attaching NULL sched-domain. [ 458.327952] CPU1 attaching NULL sched-domain. [ 458.340136] CPU0 attaching sched-domain: [ 458.340146] domain 0: span 0-1 level SIBLING [ 458.340153] groups: 0 1 [ 458.340164] CPU1 attaching sched-domain: [ 458.340169] domain 0: span 0-1 level SIBLING [ 458.340174] groups: 1 0 [ 1099.728067] type=1503 audit(1280062747.109:20): operation="open" pid=2281 parent=2274 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0" [ 1099.728190] type=1503 audit(1280062747.109:21): operation="open" pid=2281 parent=2274 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1" [ 1099.728275] type=1503 audit(1280062747.109:22): operation="open" pid=2281 parent=2274 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB2" [ 4823.852083] [drm] Big FIFO is enabled [ 4843.906954] [drm] Big FIFO is enabled [ 5746.328112] usb 3-1: USB disconnect, address 2 [ 5774.300073] usb 3-1: new low speed USB device using uhci_hcd and address 3 [ 5774.477397] usb 3-1: configuration #1 chosen from 1 choice [ 5774.496283] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11 [ 5774.496810] generic-usb 0003:046D:C019.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 5785.584464] CPU0 attaching NULL sched-domain. [ 5785.584479] CPU1 attaching NULL sched-domain. [ 5785.596687] CPU0 attaching sched-domain: [ 5785.596699] domain 0: span 0-1 level SIBLING [ 5785.596708] groups: 0 1 [ 5785.596724] CPU1 attaching sched-domain: [ 5785.596732] domain 0: span 0-1 level SIBLING [ 5785.596740] groups: 1 0 [ 5785.837493] CPU0 attaching NULL sched-domain. [ 5785.837509] CPU1 attaching NULL sched-domain. [ 5785.852673] CPU0 attaching sched-domain: [ 5785.852684] domain 0: span 0-1 level SIBLING [ 5785.852692] groups: 0 1 [ 5785.852707] CPU1 attaching sched-domain: [ 5785.852714] domain 0: span 0-1 level SIBLING [ 5785.852722] groups: 1 0 [ 5817.177060] CPU0 attaching NULL sched-domain. [ 5817.177074] CPU1 attaching NULL sched-domain. [ 5817.192702] CPU0 attaching sched-domain: [ 5817.192714] domain 0: span 0-1 level SIBLING [ 5817.192723] groups: 0 1 [ 5817.192738] CPU1 attaching sched-domain: [ 5817.192746] domain 0: span 0-1 level SIBLING [ 5817.192753] groups: 1 0 [ 5838.471932] type=1503 audit(1280067485.849:23): operation="open" pid=2650 parent=2643 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0" [ 5838.492214] type=1503 audit(1280067485.873:24): operation="open" pid=2650 parent=2643 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1" [ 5838.492329] type=1503 audit(1280067485.873:25): operation="open" pid=2650 parent=2643 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB2" [ 7036.848110] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x021f0900 mav...@caspermini:~$ 25 07 2010 tarihinde Talat UYARER <ta...@uyarer.com> yazmış: > Size yardımcı olabilmemiz için lspci ve dmesg cıktılarınızı bizimle > paylasmalısınız. Sizden ricam bu bilgileri paylasabilir misiniz ? > > > 25-07-2010 12:55, Muhammed BÜYÜKKURT yazmış: >> merhabalar >> casper minibook aldım >> usb den ubuntu 9 u kurdum(10.4 açlımadı siyah ekranda takılı >> kalıyordu.) ancak wireless i görmüyor >> eskiden eeepc vardı, onda bios dan onboard devices kısmından >> açıyordum ancak bunda öyle birşey de yok, ne yapacam şaşırdım kaldım >> >> -- > > > -- > ubuntu-tr mailing list > ubuntu-tr@lists.ubuntu.com > https://lists.ubuntu.com/mailman/listinfo/ubuntu-tr > -- www.selcukbiyoloji.com -- ubuntu-tr mailing list ubuntu-tr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-tr
