Hi, I have a problem some users more experienced in system configuration than myself might be able to help me with:
I want to Have one Desktop, wich ranges over two monitors. At the same point I want my Wacom Bamboo's active space match the size of one monitor at the time instead of the whole desktop. The Reason for that is simply the tiny size of my Bamboo. How do I achieve this? Thanks in advance for your help. I have already tried to follow this how-to: https://help.ubuntu.com/community/Wacom but instead of the Options described there, I used the following lines in the 10-wacom.conf: ----------Code begins----------------- Section "InputClass" Identifier "Wacom class" MatchProduct "Wacom|WACOM" MatchDevicePath "/dev/input/event*" Driver "wacom" Option "Twinview" "horizontal" Option "TVResolution" "1920x1080,1680x1050" EndSection Section "InputClass" Identifier "Wacom serial class" MatchProduct "Serial Wacom Tablet" Driver "wacom" Option "ForceDevice" "ISDV4" EndSection # N-Trig Duosense Electromagnetic Digitizer Section "InputClass" Identifier "Wacom N-Trig class" MatchProduct "HID 1b96:0001" MatchDevicePath "/dev/input/event*" Driver "wacom" EndSection ----------------Code ends---------- The Result was rather disappointing. When I tried to use the Stylus, the Pointer was Stuck to the left border of Screen 0 which equals the very left border of the Desktop. I run Ubuntu Studio 10.04 LTS 64 on an AMD. Graphic-Card is an Geforce 8800 GT according to the NVidia-Driver I use. The Bamboo I use is from the very first version from about 4 years ago. Below you see the settings the NVidia-Driver wrote to the xorg.conf to configure the two screens: ----------------Code begins-------- # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@yellow) Fri Apr 9 11:51:21 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "ACI ASUS VE258" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8800 GT" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: 1920x1080 +0+0, DFP-1: 1680x1050 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection ----------Code Ends---------- Greetings Paul -- Ubuntu-Studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
