Sorry I took so long to check the bug... The new package seems to be almost working, but the driver says it can't calculate the battery %: $ /lib/nut/megatec_usb -DDDDD -a SAI ... Checking device (0665/5161) (001/007) - VendorID: 0665 - ProductID: 5161 - Manufacturer: Cypress Semiconductor - Product: USB to Serial - Serial Number: unknown - Bus: 001 Trying to match device Device matches get_data_agiler: raw dump: (0 bytes) => get_data_agiler: raw dump: (0 bytes) => Starting UPS detection process... Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 00001001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 00001001] Asking for UPS status [Q1]... Q1 => OK [(225.0 225.0 225.0 042 50.1 13.6 25.0 00001001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.0 225.0 043 50.1 13.6 25.0 00001001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 043 50.1 13.6 25.0 00001001] 0 out of 5 detection attempts failed (minimum failures: 2). Asking for UPS information [I]... get_data_agiler: raw dump: (0 bytes) => I => FAILED [short read] I detail: (0 bytes) => Megatec protocol UPS detected. Cancelling any pending shutdown or battery test. Asking for UPS power ratings [F]... get_data_agiler: raw dump: (0 bytes) => F => FAILED [short read] F detail: (0 bytes) => Cannot calculate charge percentage for this UPS. <-**************** Done setting up the UPS. Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 00001001] dstate_init: sock /var/run/nut/megatec_usb-SAI open on fd 5 Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 00001001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.0 042 50.1 13.6 25.0 00001001] ...
So I tried the svn version (as today, revision 143) and the result is: $ drivers/megatec_usb -DDDDD -a SAI ... Checking device (0665/5161) (001/007) - VendorID: 0665 - ProductID: 5161 - Manufacturer: Cypress Semiconductor - Product: USB to Serial - Serial Number: unknown - Bus: 001 Trying to match device Device matches get_data_agiler: raw dump: (0 bytes) => Starting UPS detection process... Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(226.9 226.9 226.9 044 50.1 13.6 25.0 00001001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(226.9 226.9 226.9 044 50.1 13.6 25.0 00001001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(226.9 227.4 226.9 043 50.1 13.6 25.0 00001001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 227.4 227.4 042 50.1 13.6 25.0 00001001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 227.4 226.9 044 50.1 13.6 25.0 00001001] 0 out of 5 detection attempts failed (minimum failures: 2). Cancelling any pending shutdown or battery test. Asking for UPS information [I]... get_data_agiler: raw dump: (0 bytes) => get_data_agiler: raw dump: (0 bytes) => I => FAILED [short read] I detail: (0 bytes) => Megatec protocol UPS detected. Parameter [ignoreoff]: [false] Asking for UPS power ratings [F]... get_data_agiler: raw dump: (0 bytes) => get_data_agiler: raw dump: (24 bytes) => 23 32 33 30 2e 30 20 30 30 32 20 31 32 2e 30 30 20 35 30 2e 30 0d 30 30 F => OK [#230.0 002 12.00 50.0] 12.0V battery, interval [9.7V, 13.7V]. <-----**************** Done setting up the UPS. Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 227.4 227.4 043 50.1 13.6 25.0 00001001] Calculated battery charge: 97.5% <-----**************** dstate_init: sock /var/run/nut/megatec_usb-SAI open on fd 5 Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 226.9 227.4 042 50.1 13.6 25.0 00001001] Calculated battery charge: 97.5% Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 226.9 226.9 044 50.1 13.6 25.0 00001001] Calculated battery charge: 97.5% ... -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
