Начинайте новую тему новым письмом, а не ответом на письмо из другой темы!
04.07.2012 3:45, Роман writes: > Есть ПК подключенный по WiFI > и во время старта Ubuntu 12.04 (serv) периодически не ловит точку и как > следствие > приходится рестартовать службу сети. > > Хотелось бы настроить, чтобы ловила с 1 захода. Достает делать > рестарты. > > В качестве WiFI - USB адаптер ASUS > Bus 002 Device 002: ID 0b05:1784 ASUSTek Computer, Inc. USB-N13 802.11n > Network Adapter [Ralink RT3072] > > вот конфигурация interfaces > > # The loopback network interface > auto lo > iface lo inet loopback > > # The primary network interface > auto wlan0 > iface wlan0 inet static > wpa-ssid xan > wpa-ap-scan 1 > wpa-proto RSN > wpa-pairwise CCMP > wpa-group TKIP > wpa-key-mgmt WPA-PSK > wpa-psk d388508f9f9ef92e033e422045f2d19f214febc3333e986a7462ef92d6b > address 192.168.1.10 > netmask 255.255.255.0 > gateway 192.168.1.1 > dns-nameservers 81.88.208.202 81.88.208.250 > > > при загрузке > 16.617725] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 41.476593] init: failsafe main process (981) killed by TERM signal > [ 41.481773] init: network-manager main process (1174) terminated with > status 127 > [ 41.481790] init: network-manager main process ended, respawning > [ 41.500194] type=1400 audit(1341347121.366:9): apparmor="STATUS" > operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp > -client.action" pid=1210 comm="apparmor_parser" > > [ 285.049826] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 285.410143] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 293.608951] wlan0: authenticate with bc:ae:c5:c4:98:2b (try 1) > [ 293.610462] wlan0: authenticated > [ 293.664698] wlan0: associate with bc:ae:c5:c4:98:2b (try 1) > [ 293.667582] wlan0: RX AssocResp from bc:ae:c5:c4:98:2b (capab=0x411 > status=0 aid=4) > [ 293.667585] wlan0: associated > [ 293.696937] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 303.840005] wlan0: no IPv6 routers present > [ 368.680229] wlan0: deauthenticating from bc:ae:c5:c4:98:2b by local choice > (reason=3) > [ 368.702484] cfg80211: All devices are disconnected, going to restore > regulatory settings > [ 368.702489] cfg80211: Restoring regulatory settings > [ 368.702493] cfg80211: Calling CRDA to update world regulatory domain > [ 368.760226] cfg80211: Updating information on frequency 2412 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760230] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760233] cfg80211: Updating information on frequency 2417 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760236] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760239] cfg80211: Updating information on frequency 2422 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760241] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760244] cfg80211: Updating information on frequency 2427 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760246] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760249] cfg80211: Updating information on frequency 2432 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760252] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760254] cfg80211: Updating information on frequency 2437 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760257] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760259] cfg80211: Updating information on frequency 2442 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760262] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760264] cfg80211: Updating information on frequency 2447 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760267] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760270] cfg80211: Updating information on frequency 2452 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760273] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760275] cfg80211: Updating information on frequency 2457 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760278] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760280] cfg80211: Updating information on frequency 2462 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760283] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760285] cfg80211: Updating information on frequency 2467 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760288] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 368.760291] cfg80211: Updating information on frequency 2472 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760294] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 368.760296] cfg80211: Updating information on frequency 2484 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760299] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 368.760302] cfg80211: World regulatory domain updated: > [ 368.760304] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 368.760307] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 368.760310] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm) > [ 368.760312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm) > [ 368.760315] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 368.760317] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 369.069730] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 369.430059] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 371.392855] wlan0: authenticate with bc:ae:c5:c4:98:2b (try 1) > [ 293.610462] wlan0: authenticated > [ 293.664698] wlan0: associate with bc:ae:c5:c4:98:2b (try 1) > [ 293.667582] wlan0: RX AssocResp from bc:ae:c5:c4:98:2b (capab=0x411 > status=0 aid=4) > [ 293.667585] wlan0: associated > [ 293.696937] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 303.840005] wlan0: no IPv6 routers present > [ 368.680229] wlan0: deauthenticating from bc:ae:c5:c4:98:2b by local choice > (reason=3) > [ 368.702484] cfg80211: All devices are disconnected, going to restore > regulatory settings > [ 368.702489] cfg80211: Restoring regulatory settings > [ 368.702493] cfg80211: Calling CRDA to update world regulatory domain > [ 368.760226] cfg80211: Updating information on frequency 2412 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760230] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760233] cfg80211: Updating information on frequency 2417 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760236] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760239] cfg80211: Updating information on frequency 2422 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760241] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760244] cfg80211: Updating information on frequency 2427 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760246] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760249] cfg80211: Updating information on frequency 2432 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760252] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760254] cfg80211: Updating information on frequency 2437 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760257] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760259] cfg80211: Updating information on frequency 2442 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760262] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760264] cfg80211: Updating information on frequency 2447 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760267] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760270] cfg80211: Updating information on frequency 2452 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760273] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760275] cfg80211: Updating information on frequency 2457 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760278] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760280] cfg80211: Updating information on frequency 2462 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760283] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 368.760285] cfg80211: Updating information on frequency 2467 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760288] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 368.760291] cfg80211: Updating information on frequency 2472 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760294] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 368.760296] cfg80211: Updating information on frequency 2484 MHz for a 20 > MHz width channel with regulatory rule: > [ 368.760299] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 368.760302] cfg80211: World regulatory domain updated: > [ 368.760304] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 368.760307] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 368.760310] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm) > [ 368.760312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm) > [ 368.760315] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 368.760317] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 369.069730] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 369.430059] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 371.392855] wlan0: authenticate with bc:ae:c5:c4:98:2b (try 1) > [ 371.394367] wlan0: authenticated > [ 371.411980] wlan0: associate with bc:ae:c5:c4:98:2b (try 1) > [ 371.414864] wlan0: RX AssocResp from bc:ae:c5:c4:98:2b (capab=0x411 > status=0 aid=4) > [ 371.414868] wlan0: associated > [ 371.440841] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 382.400005] wlan0: no IPv6 routers present > > -- ubuntu-ru mailing list ubuntu-ru@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
