> >> У вас явная аппаратная проблема. Если флешка вставляется в порт на > >> передней панели компьютера, возможны проблемы с проводом от матплаты до > >> флешки. Возможно также, что проблема кроется в недостаточно стабильном > >> питании со стороны источника питания. > > использование флешки через задний про... порт ситуацию не изменило > > > > > А I/O Error из dmesg пропало? Если пропало, но скорость всё равно > низкая, то у меня более идей нет, если не пропало — в сервис.
[ 0.331528] NetLabel: Initializing [ 0.331529] NetLabel: domain hash size = 128 [ 0.331530] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.331545] NetLabel: unlabeled traffic allowed by default [ 0.333187] AppArmor: AppArmor Filesystem Enabled [ 0.333204] pnp: PnP ACPI init [ 0.333216] ACPI: bus type pnp registered [ 0.336124] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.336128] pnp 00:0d: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.336131] pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.336134] pnp 00:0d: mem resource (0x100000-0x7fffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.336416] ACPI Error: No handler for Region [SACS] (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319) [ 0.336421] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.336425] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff88007d0481e0), AE_NOT_EXIST [ 0.336446] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff88007d0481e0), AE_NOT_EXIST [ 0.336459] ACPI Error: No handler for Region [SACS] (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319) [ 0.336462] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.336467] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff88007d0482c0), AE_NOT_EXIST [ 0.336487] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff88007d0482c0), AE_NOT_EXIST [ 0.336502] ACPI Error: No handler for Region [SACS] (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319) [ 0.336505] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.336509] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff88007d0484a0), AE_NOT_EXIST [ 0.336529] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff88007d0484a0), AE_NOT_EXIST [ 0.336542] ACPI Error: No handler for Region [SACS] (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319) [ 0.336545] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.336549] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff88007d048580), AE_NOT_EXIST [ 0.336569] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff88007d048580), AE_NOT_EXIST [ 0.336574] pnp: PnP ACPI: found 14 devices [ 0.336575] ACPI: ACPI bus type pnp unregistered [ 0.336587] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.336589] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.336595] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.336598] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.336600] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.336602] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.336605] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.336607] system 00:08: ioport range 0xc50-0xc51 has been reserved [ 0.336609] system 00:08: ioport range 0xc52-0xc52 has been reserved [ 0.336611] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.336614] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.336616] system 00:08: ioport range 0xcd0-0xcd1 has been reserved [ 0.336618] system 00:08: ioport range 0xcd2-0xcd3 has been reserved [ 0.336621] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.336623] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.336625] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.336628] system 00:08: ioport range 0x800-0x89f has been reserved [ 0.336630] system 00:08: ioport range 0xb00-0xb0f has been reserved [ 0.336633] system 00:08: ioport range 0xb20-0xb3f has been reserved [ 0.336635] system 00:08: ioport range 0x900-0x90f has been reserved [ 0.336637] system 00:08: ioport range 0x910-0x91f has been reserved [ 0.336640] system 00:08: ioport range 0xfe00-0xfefe has been reserved [ 0.336643] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.336645] system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.336650] system 00:0b: ioport range 0x280-0x28f has been reserved [ 0.336652] system 00:0b: ioport range 0x290-0x29f has been reserved [ 0.336661] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.336666] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.341352] Switching to clocksource acpi_pm [ 0.341553] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.341553] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.341553] pci 0000:00:02.0: MEM window: 0xfa000000-0xfebfffff [ 0.341553] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.341553] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01 [ 0.341553] pci 0000:00:0a.0: IO window: 0xd000-0xdfff [ 0.341553] pci 0000:00:0a.0: MEM window: 0xf9f00000-0xf9ffffff [ 0.341553] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.341553] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.341553] pci 0000:00:14.4: IO window: disabled [ 0.341553] pci 0000:00:14.4: MEM window: disabled [ 0.341553] pci 0000:00:14.4: PREFETCH window: disabled [ 0.341553] alloc irq_desc for 18 on node 0 [ 0.341553] alloc kstat_irqs on node 0 [ 0.341553] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.341553] pci 0000:00:02.0: setting latency timer to 64 [ 0.341553] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.341553] pci 0000:00:0a.0: setting latency timer to 64 [ 0.341553] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.341553] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.341553] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.341553] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfebfffff] [ 0.341553] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.341553] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.341553] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xf9ffffff] [ 0.341553] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff] [ 0.341553] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.341553] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.341553] NET: Registered protocol family 2 [ 0.341553] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.341553] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.343188] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.343751] TCP: Hash tables configured (established 262144 bind 65536) [ 0.343753] TCP reno registered [ 0.343883] NET: Registered protocol family 1 [ 0.344008] pci 0000:02:00.0: Boot video device [ 0.345009] Scanning for low memory corruption every 60 seconds [ 0.345120] audit: initializing netlink socket (disabled) [ 0.345130] type=2000 audit(1336592959.340:1): initialized [ 0.352546] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.353712] VFS: Disk quotas dquot_6.5.2 [ 0.353758] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.354280] fuse init (API version 7.13) [ 0.354348] msgmni has been set to 4000 [ 0.354530] alg: No test for stdrng (krng) [ 0.354573] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.354575] io scheduler noop registered [ 0.354576] io scheduler anticipatory registered [ 0.354578] io scheduler deadline registered [ 0.354628] io scheduler cfq registered (default) [ 0.354772] alloc irq_desc for 24 on node 0 [ 0.354775] alloc kstat_irqs on node 0 [ 0.354783] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.354789] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.354890] alloc irq_desc for 25 on node 0 [ 0.354891] alloc kstat_irqs on node 0 [ 0.354896] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X [ 0.354901] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.354961] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.354981] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.355077] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.355081] ACPI: Power Button [PWRB] [ 0.355121] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.355123] ACPI: Power Button [PWRF] [ 0.355463] processor LNXCPU:00: registered as cooling_device0 [ 0.355493] processor LNXCPU:01: registered as cooling_device1 [ 0.357226] ACPI Error: No handler for Region [SACS] (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319) [ 0.357231] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.357236] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff88007d0481e0), AE_NOT_EXIST [ 0.357257] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff88007d0481e0), AE_NOT_EXIST [ 0.357276] ACPI Error: No handler for Region [SACS] (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319) [ 0.357280] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.357284] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff88007d0482c0), AE_NOT_EXIST [ 0.357304] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff88007d0482c0), AE_NOT_EXIST [ 0.357331] ACPI Error: No handler for Region [SACS] (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319) [ 0.357335] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.357339] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff88007d0484a0), AE_NOT_EXIST [ 0.357358] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff88007d0484a0), AE_NOT_EXIST [ 0.357378] ACPI Error: No handler for Region [SACS] (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319) [ 0.357381] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.357385] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff88007d048580), AE_NOT_EXIST [ 0.357405] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff88007d048580), AE_NOT_EXIST [ 0.358572] hpet_acpi_add: no address or irqs in _CRS [ 0.358583] Linux agpgart interface v0.103 [ 0.358613] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.358729] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.359019] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.359845] brd: module loaded [ 0.360309] loop: module loaded [ 0.360385] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.360572] alloc irq_desc for 16 on node 0 [ 0.360574] alloc kstat_irqs on node 0 [ 0.360582] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.360625] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 0.360913] Fixed MDIO Bus: probed [ 0.360939] PPP generic driver version 2.4.2 [ 0.360965] tun: Universal TUN/TAP device driver, 1.6 [ 0.360967] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 0.361032] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.361077] alloc irq_desc for 17 on node 0 [ 0.361079] alloc kstat_irqs on node 0 [ 0.361083] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.361099] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.361128] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.361164] ehci_hcd 0000:00:12.2: debug port 1 [ 0.361189] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9eff000 [ 0.380026] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.380100] usb usb1: configuration #1 chosen from 1 choice [ 0.380124] hub 1-0:1.0: USB hub found [ 0.380130] hub 1-0:1.0: 6 ports detected [ 0.380209] alloc irq_desc for 19 on node 0 [ 0.380210] alloc kstat_irqs on node 0 [ 0.380214] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.380227] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.380253] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.380284] ehci_hcd 0000:00:13.2: debug port 1 [ 0.380303] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9efa800 [ 0.400018] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.400072] usb usb2: configuration #1 chosen from 1 choice [ 0.400093] hub 2-0:1.0: USB hub found [ 0.400099] hub 2-0:1.0: 6 ports detected [ 0.400154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.400208] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.400219] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.400249] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.400274] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9efe000 [ 0.454012] Freeing initrd memory: 8172k freed [ 0.464086] usb usb3: configuration #1 chosen from 1 choice [ 0.464108] hub 3-0:1.0: USB hub found [ 0.464116] hub 3-0:1.0: 3 ports detected [ 0.464247] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.464256] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.464296] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 0.464313] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9efd000 [ 0.524087] usb usb4: configuration #1 chosen from 1 choice [ 0.524110] hub 4-0:1.0: USB hub found [ 0.524118] hub 4-0:1.0: 3 ports detected [ 0.524215] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.524225] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.524254] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.524277] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9efc000 [ 0.584087] usb usb5: configuration #1 chosen from 1 choice [ 0.584110] hub 5-0:1.0: USB hub found [ 0.584119] hub 5-0:1.0: 3 ports detected [ 0.584214] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.584223] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.584253] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 0.584270] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9efb000 [ 0.644081] usb usb6: configuration #1 chosen from 1 choice [ 0.644104] hub 6-0:1.0: USB hub found [ 0.644112] hub 6-0:1.0: 3 ports detected [ 0.644211] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.644221] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.644251] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 0.644269] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ef9000 [ 0.704086] usb usb7: configuration #1 chosen from 1 choice [ 0.704108] hub 7-0:1.0: USB hub found [ 0.704115] hub 7-0:1.0: 2 ports detected [ 0.704186] uhci_hcd: USB Universal Host Controller Interface driver [ 0.704264] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.704266] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.704773] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.704892] mice: PS/2 mouse device common for all mice [ 0.704988] rtc_cmos 00:02: RTC can wake from S4 [ 0.705029] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.705053] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.705169] device-mapper: uevent: version 1.0.3 [ 0.705292] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 0.705436] device-mapper: multipath: version 1.1.0 loaded [ 0.705439] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.705685] cpuidle: using governor ladder [ 0.705687] cpuidle: using governor menu [ 0.706005] TCP cubic registered [ 0.706128] NET: Registered protocol family 10 [ 0.706806] NET: Registered protocol family 17 [ 0.706841] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (2 cpu cores) (version 2.20.00) [ 0.706851] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 0.706852] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 0.706932] PM: Resume from disk failed. [ 0.706945] registered taskstats version 1 [ 0.707276] Magic number: 12:472:849 [ 0.707369] rtc_cmos 00:02: setting system clock to 2012-05-09 19:49:20 UTC (1336592960) [ 0.707372] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.707373] EDD information not available. [ 0.707428] Freeing unused kernel memory: 884k freed [ 0.707887] Write protecting the kernel read-only data: 7716k [ 0.721954] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.722505] udev: starting version 151 [ 0.798445] ahci 0000:00:11.0: version 3.0 [ 0.798465] alloc irq_desc for 22 on node 0 [ 0.798467] alloc kstat_irqs on node 0 [ 0.798474] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.798529] alloc irq_desc for 26 on node 0 [ 0.798531] alloc kstat_irqs on node 0 [ 0.798542] ahci 0000:00:11.0: irq 26 for MSI/MSI-X [ 0.798643] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.798646] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.816291] scsi0 : ahci [ 0.816486] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.816510] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.816549] r8169 0000:01:00.0: setting latency timer to 64 [ 0.816585] alloc irq_desc for 27 on node 0 [ 0.816587] alloc kstat_irqs on node 0 [ 0.816599] r8169 0000:01:00.0: irq 27 for MSI/MSI-X [ 0.816788] Floppy drive(s): fd0 is 1.44M [ 0.817104] eth0: RTL8168d/8111d at 0xffffc90000356000, 00:19:66:e6:68:b9, XID 081000c0 IRQ 27 [ 0.835417] FDC 0 is a post-1991 82077 [ 0.868032] scsi1 : ahci [ 0.868088] scsi2 : ahci [ 0.868141] scsi3 : ahci [ 0.868189] ata1: SATA max UDMA/133 abar m1024@0xf9eff800 port 0xf9eff900 irq 26 [ 0.868193] ata2: SATA max UDMA/133 abar m1024@0xf9eff800 port 0xf9eff980 irq 26 [ 0.868196] ata3: SATA max UDMA/133 abar m1024@0xf9eff800 port 0xf9effa00 irq 26 [ 0.868200] ata4: SATA max UDMA/133 abar m1024@0xf9eff800 port 0xf9effa80 irq 26 [ 0.868453] scsi4 : pata_atiixp [ 0.868524] scsi5 : pata_atiixp [ 0.869679] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.869681] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 0.970854] usb 3-3: new low speed USB device using ohci_hcd and address 2 [ 1.085896] ata5.00: ATA-7: WDC WD1600AAJS-75PSA0, 05.06H05, max UDMA/133 [ 1.085899] ata5.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.085924] ata5.01: ATAPI: Optiarc DVD RW AD-7170S, 1.02, max UDMA/66 [ 1.120659] ata5.00: configured for UDMA/100 [ 1.154181] usb 3-3: configuration #1 chosen from 1 choice [ 1.170400] ata5.01: configured for UDMA/66 [ 1.200868] ata1: SATA link down (SStatus 0 SControl 300) [ 1.210868] ata2: SATA link down (SStatus 0 SControl 300) [ 1.210896] ata3: SATA link down (SStatus 0 SControl 300) [ 1.380036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.383289] ata4.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133 [ 1.383291] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.386624] ata4.00: configured for UDMA/133 [ 1.400168] scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5 [ 1.400301] sd 3:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.400319] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 1.400413] sd 3:0:0:0: [sda] Write Protect is off [ 1.400416] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.400427] scsi 4:0:0:0: Direct-Access ATA WDC WD1600AAJS-7 05.0 PQ: 0 ANSI: 5 [ 1.400438] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.400536] sd 4:0:0:0: [sdb] 312500000 512-byte logical blocks: (160 GB/149 GiB) [ 1.400547] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 1.400571] sd 4:0:0:0: [sdb] Write Protect is off [ 1.400574] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.400663] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.400839] sda: [ 1.401520] scsi 4:0:1:0: CD-ROM Optiarc DVD RW AD-7170S 1.02 PQ: 0 ANSI: 5 [ 1.401559] sdb: sda1 [ 1.405206] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.410859] sdb1 sdb2 < sdb5 sdb6 sdb7sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.460013] Uniform CD-ROM driver Revision: 3.20 [ 1.460083] sr 4:0:1:0: Attached scsi CD-ROM sr0 [ 1.460146] sr 4:0:1:0: Attached scsi generic sg2 type 5 [ 1.467142] sdb8 > [ 1.467423] sd 4:0:0:0: [sdb] Attached SCSI disk [ 1.630594] ata6.00: ATAPI: TOSHIBA ODD-DVD SD-R5272, 1030, max UDMA/33 [ 1.670555] ata6.00: configured for UDMA/33 [ 1.676656] scsi 5:0:0:0: CD-ROM TOSHIBA ODD-DVD SD-R5272 1030 PQ: 0 ANSI: 5 [ 1.684709] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.684779] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 1.684822] sr 5:0:0:0: Attached scsi generic sg3 type 5 [ 1.690094] usbcore: registered new interface driver hiddev [ 1.695414] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input4 [ 1.695505] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-3/input0 [ 1.695532] usbcore: registered new interface driver usbhid [ 1.695534] usbhid: v2.6:USB HID core driver [ 2.210219] EXT4-fs (sdb6): mounted filesystem with ordered data mode [ 14.101197] Adding 1998840k swap on /dev/sdb7. Priority:-1 extents:1 across:1998840k [ 14.110713] udev: starting version 151 [ 14.210154] vga16fb: initializing [ 14.210160] vga16fb: mapped to 0xffff8800000a0000 [ 14.210226] fb0: VGA16 VGA frame buffer device [ 14.221610] EDAC MC: Ver: 2.1.0 Jan 4 2012 [ 14.269823] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 14.269826] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.298007] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 14.342749] type=1505 audit(1336567774.133:2): operation="profile_load" pid=614 name="/sbin/dhclient3" [ 14.343114] type=1505 audit(1336567774.133:3): operation="profile_load" pid=614 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.343276] type=1505 audit(1336567774.133:4): operation="profile_load" pid=614 name="/usr/lib/connman/scripts/dhclient-script" [ 14.398914] nvidia: module license 'NVIDIA' taints kernel. [ 14.398918] Disabling lock debugging due to kernel taint [ 14.575983] nvidia 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.575993] nvidia 0000:02:00.0: setting latency timer to 64 [ 14.575998] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 14.576261] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011 [ 14.576387] EDAC amd64_edac: Ver: 3.2.0 Jan 4 2012 [ 14.672697] lp: driver loaded but no devices found [ 14.712774] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 14.712785] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 14.712786] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 14.712788] (Note that use of the override may cause unknown side effects.) [ 14.712820] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 14.714110] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.769015] Console: switching to colour frame buffer device 80x30 [ 19.791809] EXT4-fs (sdb8): mounted filesystem with ordered data mode [ 20.406433] r8169: eth0: link up [ 20.406440] r8169: eth0: link up [ 20.834504] type=1505 audit(1336567780.623:5): operation="profile_load" pid=961 name="/usr/share/gdm/guest-session/Xsession" [ 20.834901] type=1505 audit(1336567780.623:6): operation="profile_replace" pid=962 name="/sbin/dhclient3" [ 20.835416] type=1505 audit(1336567780.623:7): operation="profile_replace" pid=962 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 20.837484] type=1505 audit(1336567780.623:8): operation="profile_replace" pid=962 name="/usr/lib/connman/scripts/dhclient-script" [ 20.845372] type=1505 audit(1336567780.633:9): operation="profile_load" pid=965 name="/usr/lib/cups/backend/cups-pdf" [ 20.845667] type=1505 audit(1336567780.633:10): operation="profile_load" pid=965 name="/usr/sbin/cupsd" [ 20.848101] type=1505 audit(1336567780.633:11): operation="profile_load" pid=967 name="/usr/sbin/mysqld" [ 20.853020] type=1505 audit(1336567780.643:12): operation="profile_load" pid=963 name="/usr/bin/evince" [ 20.854099] type=1505 audit(1336567780.643:13): operation="profile_load" pid=969 name="/usr/sbin/tcpdump" [ 20.856013] type=1505 audit(1336567780.643:14): operation="profile_load" pid=963 name="/usr/bin/evince-previewer" [ 22.440145] ppdev: user-space parallel port driver [ 22.728335] CPU0 attaching NULL sched-domain. [ 22.728342] CPU1 attaching NULL sched-domain. [ 22.921019] CPU0 attaching sched-domain: [ 22.921024] domain 0: span 0-1 level MC [ 22.921027] groups: 0 1 [ 22.921033] CPU1 attaching sched-domain: [ 22.921035] domain 0: span 0-1 level MC [ 22.921037] groups: 1 0 [ 24.250250] r8169: WARNING! Changing of MTU on this NIC may lead to frame reception errors! [ 25.174745] CPU0 attaching NULL sched-domain. [ 25.174751] CPU1 attaching NULL sched-domain. [ 25.230095] CPU0 attaching sched-domain: [ 25.230100] domain 0: span 0-1 level MC [ 25.230102] groups: 0 1 [ 25.230107] CPU1 attaching sched-domain: [ 25.230109] domain 0: span 0-1 level MC [ 25.230111] groups: 1 0 [ 30.480848] eth0: no IPv6 routers present [ 414.050042] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 414.203479] usb 1-4: configuration #1 chosen from 1 choice [ 414.279361] Initializing USB Mass Storage driver... [ 414.279656] scsi6 : SCSI emulation for USB Mass Storage devices [ 414.279763] usbcore: registered new interface driver usb-storage [ 414.279765] USB Mass Storage support registered. [ 414.285310] usb-storage: device found at 3 [ 414.285314] usb-storage: waiting for device to settle before scanning [ 419.280240] usb-storage: device scan complete [ 419.281984] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 419.283178] scsi 6:0:0:1: Direct-Access Multiple Flash Reader 1.05 PQ: 0 ANSI: 0 [ 419.284099] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 419.284298] sd 6:0:0:1: Attached scsi generic sg5 type 0 [ 419.767916] sd 6:0:0:1: [sdd] 7716864 512-byte logical blocks: (3.95 GB/3.67 GiB) [ 419.768663] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 419.769398] sd 6:0:0:1: [sdd] Write Protect is off [ 419.769402] sd 6:0:0:1: [sdd] Mode Sense: 03 00 00 00 [ 419.769404] sd 6:0:0:1: [sdd] Assuming drive cache: write through [ 419.775397] sd 6:0:0:1: [sdd] Assuming drive cache: write through [ 419.775403] sdd: sdd1 [ 419.780145] sd 6:0:0:1: [sdd] Assuming drive cache: write through [ 419.780152] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 1083.449299] usb 1-4: USB disconnect, address 3 -- ubuntu-ru mailing list ubuntu-ru@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
