Hello, Thanks for the information about vivid series. I flashed boot, recovery,System images and Ubuntu Rootfs tarball to my phone, it works fine.
The reason behind building all by myself is that I would like to make some changes to optimize power right away from booting. This information was quite helpful. Thanks Ujwal On 8 August 2016 at 16:07, Lukasz Zemczak <lukasz.zemc...@canonical.com> wrote: > Hello! > > Sadly I cannot help much about the building problems you've been > encountering as for mako we are using launchpad livefs to build the > relevant parts for us (using the android packages from the ubuntu > archives). Just wanted to mention one thing here: yakkety is not a > really a supported series for Ubuntu Touch. No one is doing any QA on > yakkety ubuntu-touch so there's a high chance that the current images > will not work or boot at all. The touch development cycle is a bit > different than for normal ubuntu and baseline switches happen much > less frequently. Currently all ubuntu-touch development is ongoing on > the slightly-outdated vivid series (through a special PPA called > stable-phone-overlay), with a near-future switch to xenial. > Just saying: there is chance that the yakkety-preinstalled-* pieces > you used for flashing are not booting because the current system is > broken and building them from scratch will not change the situation. > > For any experimenting we, of course, recommend using our stable > channels. We have daily images built on system-image.ubuntu.com that > can be easily used on mako by flashing through the ubuntu-device-flash > tool. Please check out ubuntu-touch/stable/ubuntu for the stable > images. > > That being said, if you want to try building all the bits yourself > from scratch, everything is possible to do and I'm sure someone with > more experience could help out. Although besides the learning and > fun-factor I don't see too much reason to do that as mako is still our > supported platform. We're doing even nightly-built images for it in > the rc-proposed channel. > > Cheers! > > > On 9 August 2016 at 00:49, ujwal satish m <ujwalsatish...@gmail.com> > wrote: > > I think for building > > 1. boot.img > > 2. recovery.img > > 3. system.img (Android LXC container) > > > > one has to follow the Ubuntu touch building web page. > > > > > > On 8 August 2016 at 09:26, Joseph Liau <jos...@liau.ca> wrote: > >> > >> > >> > >> On 2016-08-08 12:12 AM, Richard Somlói wrote: > >> > Hey, > >> > > >> > Why do you want to port Ubuntu Touch to Nexus4? It is an official > >> > supported device with official images. > >> I am actually curious in trying to obtain the code and made changes for > >> contribution or testing my own image. > >> > >> Are there any official instructions out there for getting the code and > >> submitting changes? > >> > >> > 2016. augusztus 8., hétfő 4:53:34 CEST, ujwal satish m > >> > <ujwalsatish...@gmail.com> írta: > >> >> Hello, > >> >> > >> >> I have been trying to compile and build Ubuntu Touch for Nexus4. I > >> >> followed > >> >> the steps mentioned in the porting guide. When I push the system.img > >> >> [Android] using rootstock installer, the screen goes blank. So far I > >> >> have > >> >> followed these instructions: > >> >> > >> >> 1.sudo add-apt-repository ppa:phablet-team/tools > >> >> > >> >> sudo apt-get update > >> >> sudo apt-get install phablet-tools > >> >> > >> >> 2. sudo apt-get install git gnupg flex bison gperf build-essential > zip > >> >> bzr curl libc6-dev libncurses5-dev:i386 x11proto-core-dev > >> >> libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 > >> >> libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown > >> >> libxml2-utils xsltproc zlib1g-dev:i386 schedtool g++-4.8-multilib > >> >> > >> >> 3.mkdir phablet phablet-dev-bootstrap phablet > >> >> > >> >> 4.export cache > >> >> 5. lunch--> mako_userdebug > >> >> 6. make -j4 > >> >> 7.flash all the relevant images(boot.img,recovery.img and system.img) > >> >> > >> >> I pulled the kernel msg: > >> >> it says: 6.114329] Adding 32764k swap on /root/userdata/SWAP.img. > >> >> Priority:-1 extents:1 across:32764k SS > >> >> [ 11.074286] init: could not import file 'init.mako_svelte.rc' from > >> >> '/init.mako.rc' > >> >> [ 11.377811] init: cannot open '/initlogo.rle' > >> >> [ 13.918083] [rmnet0] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.918815] [rmnet1] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.919487] [rmnet2] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.920067] [rmnet3] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.920891] [rmnet4] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.921471] [rmnet5] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.922173] [rmnet6] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.922997] [rmnet7] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.923729] [rev_rmnet0] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.924523] [rev_rmnet1] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.925316] [rev_rmnet2] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.926293] [rev_rmnet3] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.927178] [rev_rmnet4] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.928063] [rev_rmnet5] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.928857] [rev_rmnet6] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.929620] [rev_rmnet7] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.930321] [rev_rmnet8] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> [ 13.931115] [rmnet_smux0] error: rmnet_ioct called for unsupported > >> >> cmd[35585] > >> >> > >> >> Can somebody please guide me where I'm going wrong. Because im stuck > >> >> in this from past 2 weeks. > >> >> > >> >> Regards > >> >> > >> >> Ujwal > >> >> > >> > > >> > >> > >> -- > >> Mailing list: https://launchpad.net/~ubuntu-phone > >> Post to : ubuntu-phone@lists.launchpad.net > >> Unsubscribe : https://launchpad.net/~ubuntu-phone > >> More help : https://help.launchpad.net/ListHelp > > > > > > > > -- > > Mailing list: https://launchpad.net/~ubuntu-phone > > Post to : ubuntu-phone@lists.launchpad.net > > Unsubscribe : https://launchpad.net/~ubuntu-phone > > More help : https://help.launchpad.net/ListHelp > > > > > > -- > Łukasz 'sil2100' Zemczak > Foundations Team > lukasz.zemc...@canonical.com > www.canonical.com >
-- Mailing list: https://launchpad.net/~ubuntu-phone Post to : ubuntu-phone@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-phone More help : https://help.launchpad.net/ListHelp
