Hi Matthias,
I extracted the baresip first in Documents, so the config was still
there. Copying that in place results in a slightly better performance:
e...@iptel.org: Some echo of my own voice, but mainly an irritating beep
e...@ekiga.net: a clear audio message: The call failed
Any idea on how to tweak the settings? Just trial and error? Any other
working echo services, because I think the ekiga one is not working
anymore...
This is the output I still get:
call: connecting to 'sip:e...@iptel.org'..
call: SIP Progress: 100 Trying (/)
call: SIP Progress: 100 Trying (/)
audio: Set audio decoder: PCMU 8000Hz 1ch
audio: enable auplay resampler: 8000Hz/1ch --> 48000Hz/1ch
pulse: opening player (48000 Hz, 1 channels, device '')
pulse: playback started
audio: Set audio encoder: PCMU 8000Hz 1ch
audio: enable ausrc resampler: 8000Hz/1ch <-- 48000Hz/1ch
pulse: opening recorder (48000 Hz, 1 channels, device '')
pulse: recording started
audio tx pipeline: pulse ---> vumeter ---> PCMU
audio rx pipeline: pulse <--- vumeter <--- PCMU
ma...@sip.iptel.org: Call established: sip:e...@iptel.org
main: long async blocking: 571>100 ms (h=0xb6f52159 arg=0xa4fed8)
Mattias
On 14-06-16 21:39, Matthias Apitz wrote:
El día Tuesday, June 14, 2016 a las 09:15:42PM +0200, Mattias escribió:
Hi Matthias,
Thanks for the great work! I am trying this on a MX4, but I have some
sounds issues. Probably due to different hardware compared to the BQ
devices. When I make a call to an echo service, I can hear a ticking
sound. I think the error is:
main: long async blocking: 1127>100 ms (h=0xb6f9a159 arg=0xded530)
The complete output is available here: http://paste.ubuntu.com/17336821/
Can you maybe share how you tweaked the configuration? I see you changed
some values in ~/.baresip/config at
https://github.com/alfredh/baresip/issues/136
If I remember correctly you also wrote something about using oss.so?
Would be nice if you can help to find the correct values for the MX4 device.
Hello,
The tar archive I published contains my working ~/.baresip/config. On
the BQ E4.5 and M10 I'm using the pulse.so driver, the others (alsa.so
and oss.so) do not work.
matthias
$ wget http://www.unixarea.de/bq-baresip.tgz
$ md5 bq-baresip.tgz
MD5 (bq-baresip.tgz) = 1cb13e6fc70d2b3136d90ee988cc46a8
--
Mailing list: https://launchpad.net/~ubuntu-phone
Post to : ubuntu-phone@lists.launchpad.net
Unsubscribe : https://launchpad.net/~ubuntu-phone
More help : https://help.launchpad.net/ListHelp