Arghhh Ricardo just updated his packages.... :)
On Fri, Jun 27, 2014 at 8:58 PM, David Peter <maildavidpe...@gmail.com> wrote: > Yes there is a very good reason: I want to know ;) > > I feel like, figuring out, hacking, contributing, and I am leaning for low > level, driver and hardware. I'm not interested in uploading an image and > use it. I want to hack. > My personal challenge would be to bring the magnetic switch to power > on/off the screen automatically with the nexus 5 protection case. > > I know it's definitely not a priority for the Ubuntu-touch project (that's > why I won't blame anybody if there is no response to my questions), but I > have so much to learn on linux, ubuntu and your working process that I > won't be effective soon. So I try hard to figure that out, it's very > instructive and soon or later I'll push some contributions on your servers. > On Jun 27, 2014 8:24 PM, "Rodney Dawes" <rodney.da...@canonical.com> > wrote: > >> Hi, >> >> I just saw these mails, but is there any reason you're trying to go >> about flashing this device the hard way? There are already images built >> for hammerhead, which you can install using an alternate server as >> described on the wiki page: >> >> >> https://wiki.ubuntu.com/Touch/Devices#Server_at_http:.2BAC8ALw-system-image.tasemnice.eu >> >> Not trying to discourage. Just curious as to what you're doing. There is >> an issue with the latest builds, where the screen does not unblank when >> pressing the power button, after the phone has been removed from the >> charger, and could use some help with getting fixed, if you have enough >> knowledge to figure the issue out. >> >> >> >> On Fri, 2014-06-27 at 17:20 -0400, David Peter wrote: >> > Ok ok still shenaniging... Obviously I need to learn about >> > meta-package. >> > I guess that I have to create a kernel meta package like the one >> > downloaded from rsalveti's ppa. >> > >> > I won't give up :) >> > >> > >> > On Jun 26, 2014 1:28 AM, "David Peter" <maildavidpe...@gmail.com> >> > wrote: >> > Getting closer >> > >> > >> > Method inline building modifying >> > device/lge/hammerhead/BoardConfig.mk with: >> > TARGET_KERNEL_UBUNTU := false >> > >> > adding >> > TARGET_KERNEL_CONFIG := hammerhead_defconfig >> > TARGET_KERNEL_SOURCE := kernel/lge/hammerhead >> > >> > and >> > BOARD_KERNEL_IMAGE_NAME := zImage-dtb >> > >> > >> > I have a dtb kernel, now recovery is working. Ubuntu Touch >> > still does not boot. >> > Checking the installed-files.txt compared to the one coming >> > from the prebuilt kernel it >> > >> > sounds like the only missing stuff now >> > are /system/lib/modules/3.4.0-1-hammerhead/ >> > libs. >> > >> > >> > >> > >> > >> > >> > >> > On Thu, Jun 26, 2014 at 12:00 AM, David Peter >> > <maildavidpe...@gmail.com> wrote: >> > Hi Guys, >> > >> > I feel like playing with the Hammerhead Kernel >> > >> > >> > I have figured out how to build the project: >> > >> https://code-review.phablet.ubuntu.com/p/aosp/platform/manifest.git -b >> phablet-4.4.2_r1 >> > then flash my hammerhead using rootstock-touch-install >> > and a daily image. So far so good. >> > >> > >> > >> > Next, what do I have to do with the kernel sources >> > project >> > >> https://code-review.phablet.ubuntu.com/ubuntu/kernel/trusty -b >> hammerhead ? >> > >> > >> > >> > I have tried 3 ways: >> > >> > >> > 1) building kernel in tree >> > >> > - copy the kernel sources to kernel/lge/hammerhead >> > >> > - modify device/lge/hammerhead/BoardConfig.mk >> > >> > in order to make TARGET_KERNEL_UBUNTU := false >> > >> > and add TARGET_KERNEL_CONFIG := hammerhead_defconfig >> > TARGET_KERNEL_SOURCE := >> > kernel/lge/hammerhead >> > >> > >> > >> > --> built kernel image smaller than the prebuilt one >> > from rsalveti PPA (I guess it is a dtb story). Nothing >> > will work >> > >> > >> > 2) building kernel in tree with cyanogenmod >> > BoardConfig.mk >> > >> > >> > --> built kernel image sizing the same as the prebuilt >> > one from rsalveti PPA (a dtb one by the way). Recovery >> > works, Ubuntu-Touch won't boot though >> > >> > >> > >> > 3) building myself the kernel sources >> > >> > export ARCH=arm >> > export SUBARCH=arm >> > export CROSS_COMPILE=arm-eabi- >> > make hammerhead_defconfig >> > make >> > >> > >> > ... no result yet, it was still building when I >> > dicided to write this email as I don't know what to do >> > next. >> > >> > >> > >> > >> > >> > >> > What is the proper way to build the kernel and to >> > produce the img boot recovery and system files? >> > >> > Can you give me some guidelines? >> > >> > >> > >> > >> > I am keeping notes of that process and will suggest a >> > wiki update. >> > >> > >> > Regards >> > >> > David >> > >> > >> > >> >> >>
-- Mailing list: https://launchpad.net/~ubuntu-phone Post to : ubuntu-phone@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-phone More help : https://help.launchpad.net/ListHelp
