http://people.ubuntu.com/~smb/bug254668/linux- image-2.6.27-3-generic_2.6.27-3.3smb2_i386.deb
[ 3.087260] hub 2-0:1.0: USB hub found [ 3.087330] hub 2-0:1.0: 2 ports detected [ 3.098646] SCSI subsystem initialized [ 3.122770] libata version 3.00 loaded. (pause) [ 13.701303] Clocksource tsc unstable (delta = 4398045486566 ns) [ 13.702453] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 13.702703] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 13.702809] ehci_hcd 0000:00:02.1: debug port 1 [ 13.702872] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 13.702888] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 (pause) [ 19.272505] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 22.373778] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.702809] ehci_hcd 0000:00:02.1: debug port 1 [ 13.702872] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 13.702888] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 19.272505] usb 2-1: new full speed USB device using ohci_hcd and address 2 (pause) [ 22.373778] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.373997] usb usb3: configuration #1 chosen from 1 choice [ 22.373778] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.373997] usb usb3: configuration #1 chosen from 1 choice [ 22.374086] hub 3-0:1.0: USB hub found [ 22.374153] hub 3-0:1.0: 7 ports detected (pause) [ 26.063772] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 26.063839] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22 [ 26.064012] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 26.064109] ehci_hcd 0000:00:04.1: debug port 1 [ 26.064172] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 26.064179] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 (pause) [ 29.146302] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.146493] usb usb4: configuration #1 chosen from 1 choice [ 29.146302] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.146493] usb usb4: configuration #1 chosen from 1 choice [ 29.146585] hub 4-0:1.0: USB hub found [ 29.146650] hub 4-0:1.0: 2 ports detected (pause) [ 32.772346] usb 2-1: device not accepting address 2, error -62 [ 32.810132] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 29.146585] hub 4-0:1.0: USB hub found [ 29.146650] hub 4-0:1.0: 2 ports detected [ 32.772346] usb 2-1: device not accepting address 2, error -62 [ 32.810132] pata_acpi 0000:00:06.0: setting latency timer to 64 (pause) [ 35.679016] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 32.810132] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 32.810132] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 32.810132] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 32.810132] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 32.810132] pata_acpi 0000:00:09.0: PCI INT A disabled (pause) [ 35.681069] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 35.681514] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 35.681069] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 35.681514] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 35.681585] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 35.681662] forcedeth 0000:00:0a.0: setting latency timer to 64 (pause) [ 39.645149] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:09:25:f6 [ 39.645229] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 39.711017] scsi0 : pata_amd [ 39.711217] scsi1 : pata_amd [ 39.711618] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 39.711683] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 (pause) [ 43.089979] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 43.090061] ata1: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) [ 39.711618] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 39.711683] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 43.089979] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 43.090061] ata1: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) (pause) [ 46.752316] ata1.00: configured for MWDMA2 [ 46.752422] ata2: port disabled. ignoring. [ 46.756029] ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484100 irq 221 [ 46.756029] ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484180 irq 221 [ 46.756029] ata5: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484200 irq 221 [ 46.756029] ata6: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484280 irq 221 (pause) [ 50.377800] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00964cac00] [ 53.963817] usb 4-2: new high speed USB device using ehci_hcd and address 3 [ 46.756029] ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484180 irq 221 [ 46.756029] ata5: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484200 irq 221 [ 46.756029] ata6: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484280 irq 221 [ 50.377800] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00964cac00] (pause) [ 53.963817] usb 4-2: new high speed USB device using ehci_hcd and address 3 [ 60.767520] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 46.756029] ata5: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484200 irq 221 [ 46.756029] ata6: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484280 irq 221 [ 50.377800] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00964cac00] [ 53.963817] usb 4-2: new high speed USB device using ehci_hcd and address 3 (pause) [ 60.767520] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 60.768368] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100 [ 60.768368] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100 [ 60.768435] ata3.00: 488397168 sectors, multi 16: LBA48 [ 60.769454] ata3.00: configured for UDMA/100 [ 60.785768] usb 4-2: configuration #1 chosen from 1 choice (pause) [ 68.814693] ata4: SATA link down (SStatus 0 SControl 300) [ 77.542041] ata5: SATA link down (SStatus 0 SControl 300) [ 60.768435] ata3.00: 488397168 sectors, multi 16: LBA48 [ 60.769454] ata3.00: configured for UDMA/100 [ 60.785768] usb 4-2: configuration #1 chosen from 1 choice [ 68.814693] ata4: SATA link down (SStatus 0 SControl 300) (pause) [ 77.542041] ata5: SATA link down (SStatus 0 SControl 300) [ 77.542077] usb 2-1: new full speed USB device using ohci_hcd and address 4 [ 60.785768] usb 4-2: configuration #1 chosen from 1 choice [ 68.814693] ata4: SATA link down (SStatus 0 SControl 300) [ 77.542041] ata5: SATA link down (SStatus 0 SControl 300) [ 77.542077] usb 2-1: new full speed USB device using ohci_hcd and address 4 (pause) [ 80.604751] ata6: SATA link down (SStatus 0 SControl 300) [ 80.604926] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5 [ 80.636668] sda:<5>sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 80.657015] usb 2-1: configuration #1 chosen from 1 choice [ 80.708018] sda1 sda2 sda3 < sda5 sda6 sda7 > [ 80.985022] sd 2:0:0:0: [sda] Attached SCSI disk (pause) [ 84.512748] PM: Starting manual resume from disk [ 84.512812] PM: Resume from partition 8:5 [ 84.516768] PM: Basic memory bitmaps created [ 84.561900] PM: Basic memory bitmaps freed [ 84.905877] kjournald starting. Commit interval 5 seconds [ 84.905876] EXT3-fs: mounted filesystem with ordered data mode. (pause) [ 99.379941] udevd version 124 started [ 100.358173] input: Power Button (FF) as /class/input/input2 [ 105.480277] type=1505 audit(1220479756.759:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4243 [ 105.672674] type=1505 audit(1220479756.951:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4250 [ 105.672888] type=1505 audit(1220479756.951:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4250 [ 105.777008] ip_tables: (C) 2000-2006 Netfilter Core Team (pause) [ 110.150603] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 110.148007] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x11 [ 110.148007] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x11 [ 110.148007] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12 [ 110.148007] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13 [ 110.148007] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e (pause) [ 111.306879] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 112.577186] NET: Registered protocol family 10 [ 110.148007] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12 [ 110.148007] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13 [ 110.148007] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 111.306879] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) (pause) [ 112.577186] NET: Registered protocol family 10 [ 112.578508] lo: Disabled Privacy Extensions [ 112.577186] NET: Registered protocol family 10 [ 112.578508] lo: Disabled Privacy Extensions [ 112.827185] apm: BIOS not found. [ 113.280134] ppdev: user-space parallel port driver (pause) [ 117.285135] Bluetooth: L2CAP ver 2.10 [ 117.285153] Bluetooth: L2CAP socket layer initialized [ 117.285153] Bluetooth: L2CAP socket layer initialized [ 117.325668] Bluetooth: RFCOMM socket layer initialized [ 117.325704] Bluetooth: RFCOMM TTY layer initialized [ 117.325710] Bluetooth: RFCOMM ver 1.10 (pause) [ 121.585500] eth0: no link during initialization. [ 121.586945] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 122.682161] wlan0: RX AssocResp from 00:e0:98:55:95:2c (capab=0x421 status=0 aid=2) [ 122.682173] wlan0: associated [ 122.682828] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 122.683249] wlan0: disassociating by local choice (reason=3) (pause) [ 132.952021] wlan0: no IPv6 routers present [ 200.370128] wlan0: authenticate with AP 00:e0:98:55:95:2c [ 122.682173] wlan0: associated [ 122.682828] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 122.683249] wlan0: disassociating by local choice (reason=3) [ 132.952021] wlan0: no IPv6 routers present (pause) [ 200.370128] wlan0: authenticate with AP 00:e0:98:55:95:2c [ 200.371582] wlan0: authenticated [ 200.371582] wlan0: authenticated [ 200.371603] wlan0: associate with AP 00:e0:98:55:95:2c [ 200.374028] wlan0: RX ReassocResp from 00:e0:98:55:95:2c (capab=0x421 status=0 aid=2) [ 200.374047] wlan0: associated (pause) [ 202.734863] RPC: Registered udp transport module. [ 202.734870] RPC: Registered tcp transport module. ** Attachment added: "dmesg11.txt" http://launchpadlibrarian.net/17278204/dmesg11.txt -- acpi hangs on boot https://bugs.launchpad.net/bugs/254668 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
