** Description changed: I have an Edimax EW-7318UG wlan usb stick which works fine with linux-2.6.26-3 and older. Under 2.6.26-4 the kernel oopses after plugging in the stick uname -r: 2.6.26-4-generic Oops log: [ 1144.232094] usb 3-5: new high speed USB device using ehci_hcd and address 3 [ 1144.503721] usb 3-5: configuration #1 chosen from 1 choice [ 1145.184628] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected. [ 1145.184646] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. [ 1145.184690] BUG: unable to handle kernel NULL pointer dereference at 00000010 [ 1145.184693] IP: [<c013cd9a>] flush_workqueue+0xa/0x50 [ 1145.184703] *pde = 00000000 [ 1145.184709] Oops: 0000 [#1] SMP [ 1145.184713] Modules linked in: rt2500usb(+) rt2x00usb rt2x00lib rfkill led_class input_polldev mac80211 cfg80211 ipv6 binfmt_misc rfcomm l2cap bluetooth ppdev cpufreq_conservative cpufreq_powersave cpufreq_ondemand cpufreq_stats freq_table cpufreq_userspace sbs container sbshc video output battery af_packet iptable_filter ip_tables x_tables ac parport_pc lp parport nvidia(P) snd_via82xx gameport snd_ac97_codec ac97_bus snd_mpu401_uart snd_seq_dummy snd_pcsp snd_pcm_oss snd_mixer_oss snd_seq_oss snd_pcm snd_page_alloc snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device via_ircc button snd irda crc_ccitt soundcore i2c_viapro i2c_core shpchp pci_hotplug via_agp agpgart evdev ext3 jbd mbcache usb_storage usbhid hid sg libusual sr_mod sd_mod cdrom pata_acpi ata_generic pata_via uhci_hcd libata scsi_mod dock ehci_hcd ohci_hcd tulip usbcore thermal processor fan fbcon tileblit font bitblit softcursor uvesafb cn fuse [ 1145.184771] [ 1145.184775] Pid: 5582, comm: modprobe Tainted: P (2.6.26-4-generic #1) [ 1145.184779] EIP: 0060:[<c013cd9a>] EFLAGS: 00010246 CPU: 0 [ 1145.184783] EIP is at flush_workqueue+0xa/0x50 [ 1145.184786] EAX: 00000000 EBX: d5ebd0a0 ECX: 00000096 EDX: 00000000 [ 1145.184789] ESI: c047b4f8 EDI: 00000000 EBP: de6fca00 ESP: dec21e44 [ 1145.184791] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 1145.184795] Process modprobe (pid: 5582, ti=dec20000 task=df883400 task.ti=dec20000) [ 1145.184798] Stack: d5ebd0a0 d5ebd0a0 ffffffed e0cbaf48 00000000 e0cbb056 e0cbd7d0 d5ebc0f0 [ 1145.184804] e0cbd620 e0cbd744 00000000 d5ebd0a0 d5ebc1a0 e0c91307 dee34360 e0cc96ec [ 1145.184810] c0361a38 d2a01c00 d2a01c00 00000000 de6fca00 e0cc96ec e0cc94a0 e08a6151 [ 1145.184816] Call Trace: [ 1145.184821] [<e0cbaf48>] rt2x00lib_remove_dev+0x38/0x60 [rt2x00lib] [ 1145.184838] [<e0cbb056>] rt2x00lib_probe_dev+0xe6/0x1b0 [rt2x00lib] [ 1145.184850] [<e0c91307>] rt2x00usb_probe+0xe7/0x170 [rt2x00usb] [ 1145.184860] [<c0361a38>] mutex_lock+0x8/0x20 [ 1145.184871] [<e08a6151>] usb_probe_interface+0xa1/0x110 [usbcore] [ 1145.184917] [<c029ac60>] really_probe+0x60/0x180 [ 1145.184926] [<e08a5441>] usb_match_id+0x41/0x60 [usbcore] [ 1145.184943] [<e08a5680>] usb_device_match+0x40/0x80 [usbcore] [ 1145.184961] [<c029ae51>] __driver_attach+0x71/0x80 [ 1145.184967] [<c029a5c4>] bus_for_each_dev+0x44/0x70 [ 1145.184977] [<c029ab16>] driver_attach+0x16/0x20 [ 1145.184981] [<c029ade0>] __driver_attach+0x0/0x80 [ 1145.184985] [<c0299f57>] bus_add_driver+0x1a7/0x220 [ 1145.184996] [<c029afec>] driver_register+0x5c/0x130 [ 1145.185007] [<e08a63f1>] usb_register_driver+0x81/0x100 [usbcore] [ 1145.185027] [<c0152ab8>] sys_init_module+0x88/0x1b0 [ 1145.185037] [<c0103f73>] sysenter_past_esp+0x78/0xb1 [ 1145.185055] ======================= [ 1145.185057] Code: 90 8d 50 10 e9 78 fe ff ff 90 8d b4 26 00 00 00 00 31 d2 e9 69 fe ff ff 89 f6 8d bc 27 00 00 00 00 57 89 c7 56 be f8 b4 47 c0 53 <8b> 58 10 b8 f0 b4 47 c0 85 db 0f 45 f0 e8 54 46 22 00 89 f0 e8 [ 1145.185083] EIP: [<c013cd9a>] flush_workqueue+0xa/0x50 SS:ESP 0068:dec21e44 [ 1145.185090] ---[ end trace 591fddf59e09f337 ]--- - with linux-2.6.26-generic dmesg shows this: + with linux-2.6.26-3-generic dmesg shows this: [ 114.997119] usb 3-5: new high speed USB device using ehci_hcd and address 2 [ 115.268033] usb 3-5: configuration #1 chosen from 1 choice [ 115.617564] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected. [ 115.617579] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. [ 115.617661] usbcore: registered new interface driver rt2500usb [ 115.922985] phy1: Selected rate control algorithm 'pid' [ 116.030008] Registered led device: rt73usb-phy1:radio [ 116.030046] Registered led device: rt73usb-phy1:assoc [ 116.030069] Registered led device: rt73usb-phy1:quality [ 116.030975] usbcore: registered new interface driver rt73usb [ 116.084534] firmware: requesting rt73.bin [ 116.256835] ADDRCONF(NETDEV_UP): wlan0: link is not ready lsusb: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 046d:c012 Logitech, Inc. Mouseman Dual Optical Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Any additional informations needed?
-- rt2x00 oopses in 2.6.26-4, regression against 2.6.24-3 https://bugs.launchpad.net/bugs/249242 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
