This is my portables docu... when using ubuntu it has totem video
unwanted screen output.. while using PC BSD it has not but the trouble
of using PC BSD is once you had startx it you have a black screen output
you need to turn it off twice or 3x so that you will see the pretty KDE
environment also i have a problem with it after booting from kernel, a
power spike of glitch may occur. when using ubuntu i have not
encountered that one
PC-BSD 1.5.1 Diagnostic Sheet
Generated: Sun Jun 8 10:49:26 PDT 2008
-----------------Dmesg Output-------------------------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE-p2 #7: Thu Apr 17 11:21:34 EDT 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/PCBSD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T2130 @ 1.86GHz (1862.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6ec Stepping = 12
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc189<SSE3,MON,EST,TM2,xTPR,PDCM>
AMD Features=0x100000<NX>
Cores per package: 2
real memory = 1005125632 (958 MB)
avail memory = 970084352 (925 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <MSTEST TESTONLY> on motherboard
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace,
AE_NOT_FOUND
SearchNode 0xc4d69100 StartNode 0xc4d69100 ReturnNode 0
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace,
AE_NOT_FOUND
SearchNode 0xc4d4fdc0 StartNode 0xc4d4fdc0 ReturnNode 0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib3
atapci0: <VIA 8237A SATA150 controller> port
0x4cb0-0x4cb7,0x4ca4-0x4ca7,0x4ca8-0x4caf,0x4ca0-0x4ca3,0x4c80-0x4c8f,0x4400-0x44ff
irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237A UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4c90-0x4c9f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0x4c00-0x4c1f irq 20 at device 16.0 on
pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x4c20-0x4c3f irq 22 at device 16.1 on
pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x4c40-0x4c5f irq 21 at device 16.2 on
pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x4c60-0x4c7f irq 23 at device 16.3 on
pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xcb300000-0xcb3000ff irq 21 at
device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: vendor 0x0402 USB2.0 Camera, rev 2.00/1.00, addr 2
ugen1: vendor 0x0bda RTL8187_Wireless, rev 2.00/1.00, addr 3
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x4800-0x48ff mem
0xcb300400-0xcb3004ff irq 23 at device 18.0 on pci0
vr0: Quirks: 0x0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:90:f5:64:11:35
pcib4: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pci6: <multimedia> at device 1.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci7: <ACPI PCI bus> on pcib5
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd1fff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Genius Optical Mouse, rev 1.10/1.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/TI03> at ata0-master UDMA33
ad0: 76319MB <FUJITSU MHW2080BH 0000001C> at ata2-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-L632D TI03> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
Trying to mount root from ufs:/dev/ad0s1a
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pcm0: <VIA VT8251/8237A High Definition Audio Controller> mem
0xcb000000-0xcb003fff irq 17 at device 1.0 on pci6
pcm0: <HDA Codec: VIA VT1708_8>
pcm0: <HDA Driver Revision: 20071129_0050>
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
-----------------Messages Output----------------------
Jun 8 10:33:08 pcbsd kernel: sio1: configured irq 3 not in bitmap of probed
irqs 0
Jun 8 10:33:08 pcbsd kernel: sio1: port may not be enabled
Jun 8 10:33:08 pcbsd kernel: ppc0: parallel port not found.
Jun 8 10:33:08 pcbsd kernel: sio1: configured irq 3 not in bitmap of probed
irqs 0
Jun 8 10:33:08 pcbsd kernel: sio1: port may not be enabled
Jun 8 10:33:08 pcbsd kernel: pcm0: <VIA VT8251/8237A High Definition Audio
Controller> mem 0xcb000000-0xcb003fff irq 17 at device 1.0 on pci6
Jun 8 10:33:08 pcbsd kernel: pcm0: <HDA Codec: VIA VT1708_8>
Jun 8 10:33:08 pcbsd kernel: pcm0: <HDA Driver Revision: 20071129_0050>
Jun 8 10:33:09 pcbsd kernel: ppc0: parallel port not found.
Jun 8 10:33:09 pcbsd kernel: sio1: configured irq 3 not in bitmap of probed
irqs 0
Jun 8 10:33:09 pcbsd kernel: sio1: port may not be enabled
Jun 8 10:33:09 pcbsd kernel: ppc0: parallel port not found.
Jun 8 10:33:09 pcbsd kernel: sio1: configured irq 3 not in bitmap of probed
irqs 0
Jun 8 10:33:09 pcbsd kernel: sio1: port may not be enabled
Jun 8 10:33:09 pcbsd kernel: ppc0: parallel port not found.
Jun 8 10:33:09 pcbsd kernel: sio1: configured irq 3 not in bitmap of probed
irqs 0
Jun 8 10:33:09 pcbsd kernel: sio1: port may not be enabled
Jun 8 10:33:14 pcbsd ntpd[936]: ntpd 4.2.0-a Thu Apr 17 10:55:12 EDT 2008 (1)
Jun 8 10:33:54 pcbsd sudo: stanford : TTY=unknown ; PWD=/usr/home/stanford ;
USER=root ; COMMAND=/PCBSD/SystemUpdater/bin/SystemUpdater.sh
Jun 8 10:48:52 pcbsd su: stanford to root on /dev/ttyp2
------------------RC File-----------------------------
background_dhclient="YES"
compat5x_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
moused_type="auto"
moused_enable="YES"
devd_enable="YES"
devfs_system_ruleset="devfsrules_common"
sendmail_enable="NO"
sendmail_rebuild_aliases="YES"
# Enable the pcbsd startup / shutdown scripts
pcbsdinit_enable="YES"
#Enable samba server
samba_enable="YES"
# Disable LPD
lpd_enable="NO"
# Enable CUPS
cupsd_enable="YES"
enable_linux="YES"
# FSCK Enhancements
fsck_y_enable="YES"
background_fsck="NO"
# tmpmfs Flags
tmpmfs="YES"
tmpsize="800m"
tmpmfs_flags="-S"
# Denyhosts Startup
denyhosts_enable="YES"
# powerd: adaptive speed while on AC power, adaptive while on battery power
powerd_enable="YES"
powerd_flags="-a adaptive -b adaptive" # set CPU frequency
# enable HALd
dbus_enable="YES"
polkitd_enable="YES"
hald_enable="YES"
# Enables support for HPLIP
hpiod_enable="NO"
hpssd_enable="NO"
# ntpdate is deprecated and will eventually be removed from the distribution
since
# the same functionality is available in ntpd(8).
# Without "ntpd_sync_on_start" option, ntpd refuses to perform an
# initial correction if the clock offset is too large.
#
ntpd_enable="YES"
ntpd_sync_on_start="YES"
# Enable the firewall
pf_rules="/etc/pf.conf"
pf_enable="YES"
pf_flags=""
snddetect_enable="YES"
mixer_enable="YES"
bsdstats_enable="YES"
hostname="pcbsd"
ifconfig_vr0="DHCP"
------------------Loader File-------------------------
linux_load="YES"
ulpt_load="YES"
#vesa_load="YES"
#splash_pcx_load="YES"
#bitmap_load="YES"
#bitmap_name="/boot/loading-screen.pcx"
hw.ata.atapi_dma="1"
autoboot_delay="5"
kern.ipc.shmseg=1024
kern.ipc.shmmni=1024
------------------Free Space--------------------------
Filesystem 1M-blocks Used Avail Capacity Mounted on
/dev/ad0s1a 73416 4463 63079 7% /
devfs 0 0 0 100% /dev
linprocfs 0 0 0 100% /compat/linux/proc
procfs 0 0 0 100% /proc
/dev/md0 771 0 709 0% /tmp
------------------System Processes--------------------
last pid: 11283; load averages: 0.39, 0.40, 0.32 up 0+00:17:10 10:49:26
104 processes: 1 running, 103 sleeping
Mem: 100M Active, 53M Inact, 89M Wired, 664K Cache, 79M Buf, 685M Free
Swap: 512M Total, 512M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
11254 root 1 -8 0 1868K 1480K piperd 0 0:00 1.00% sh
1087 root 1 96 0 97856K 29940K select 0 0:46 0.83% Xorg
10897 root 1 96 0 26948K 21872K select 0 0:01 0.30% kcmshell
10828 stanford 1 98 0 24788K 19908K select 1 0:01 0.17% kdesu
1487 stanford 1 112 0 24624K 19928K select 0 0:11 0.05% NetworkTray
1391 stanford 1 96 0 30036K 25964K select 0 0:03 0.05% kdeinit
1378 stanford 1 96 0 26592K 21504K select 0 0:02 0.05% kdeinit
1488 stanford 1 96 0 40216K 34944K select 1 0:13 0.00% kdeinit
1481 stanford 1 96 0 26244K 21812K select 0 0:08 0.00% kdeinit
1425 stanford 4 20 -76 11984K 8672K kserel 1 0:03 0.00% artsd
944 root 1 8 0 1324K 900K nanslp 0 0:03 0.00% powerd
1370 stanford 1 96 0 30404K 25460K select 0 0:02 0.00% kdeinit
9857 stanford 1 96 0 38020K 32688K select 0 0:02 0.00% kdeinit
907 root 1 8 0 1732K 1232K wait 0 0:02 0.00% sh
1093 haldaemon 1 96 0 5380K 3988K select 0 0:02 0.00% hald
1389 stanford 1 96 0 28196K 24256K select 0 0:02 0.00% kdeinit
458 root 1 96 0 1436K 912K select 1 0:01 0.00% moused
1444 stanford 1 96 0 20800K 16664K select 0 0:01 0.00% pbbattery
this is my community response for a simple software that is about to
make some history...
[EMAIL PROTECTED]
--
Totem - fullscreen doesn't work in Feisty
https://bugs.launchpad.net/bugs/108411
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
