Public bug reported:
I'm trying to install Ubuntu 8.04 "Hardy Heron" - Release Candidate
AMD64 but the computer is turned off just after the progress bar
"Loading the Linux Kernel" reaches 100%.
Hardware:
- Athlon 64 X2 4200
- Motherboard Asus M2N-MX SE, with Geforce 6100.
- HD IDE ST3120022A in the same PATA channel of the DVD LG GSA-H22N
I sucessfully installed the Debian Etch and run the lspci, with the
following output:
debian:~# uname -a
Linux debian 2.6.18-6-486 #1 Sun Feb 10 22:06:33 UTC 2008 i686 GNU/Linux
debian:~# lspci -v
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [dc] HyperTransport: MSI Mapping
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at 0900 [size=256]
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at 0e00 [size=64]
I/O ports at 0600 [size=64]
I/O ports at 0700 [size=64]
Capabilities: [44] Power Management version 2
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Flags: 66MHz, fast devsel
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
(prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
(prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at dfffec00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01
[Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Capabilities: [8c] HyperTransport: MSI Mapping
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 8290
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
Memory at dfff8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0
Enable-
Capabilities: [6c] HyperTransport: MSI Mapping
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a
[Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at ffa0 [size=16]
Capabilities: [44] Power Management version 2
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 89
Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
I/O ports at e480 [size=8]
Capabilities: [44] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3
Enable+
Capabilities: [6c] HyperTransport: MSI Mapping
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
Enable+
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
Enable+
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
Enable+
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
00:0d.0 VGA compatible controller: nVidia Corporation Unknown device 03d0 (rev
a2) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at dffc0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] #0f [0010]
I've tried the following kernel options:
- noapic
- nolapic
- acpi=off
- irqpool
- From "http://bugzilla.kernel.org/show_bug.cgi?id=9184"; earlyprintk=vga
- All combinations off the above options. The results were the same. Always.
Already tried to change several in BIOS, with no change.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: 8.04 halt hardy install kernel
--
The computer is turned off just after the progress bar "Loading the Linux
kernel" reaches 100%. Debian Etch and Fedora Core 8 works fine.
https://bugs.launchpad.net/bugs/224052
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
