I do dmesg | grep hd*
A
[ 22.201419] PM: Checking swsusp image.
[ 22.473646] usb 1-1: new full speed USB device using ohci_hcd and address 4
[ 22.684736] usb 1-1: configuration #1 chosen from 1 choice
[ 22.687669] hub 1-1:1.0: USB hub found
[ 22.690649] hub 1-1:1.0: 4 ports detected
[ 23.117005] usb 1-2: new low speed USB device using ohci_hcd and address 5
[ 23.324161] usb 1-2: configuration #1 chosen from 1 choice
[ 23.343959] hdd: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
[ 23.537882] usb 1-1.1: new low speed USB device using ohci_hcd and address 6
[ 23.646860] usb 1-1.1: configuration #1 chosen from 1 choice
[ 24.128174] hdc: PHILIPS PBDV1640P, ATAPI CD/DVD-ROM drive
[ 24.128187] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 24.128501] hdc: UDMA/33 mode selected
[ 24.128823] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 24.132136] hdd: UDMA/33 mode selected
[ 33.446612] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.480487] usbcore: registered new interface driver hiddev
[ 34.541697] input,hidraw0: USB HID v1.00 Mouse [HID 1241:1111] on
usb-0000:00:13.0-2
[ 34.601585] input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard]
on usb-0000:00:13.0-1.1
[ 34.681587] input,hiddev96,hidraw2: USB HID v1.10 Mouse [USB-compliant
keyboard] on usb-0000:00:13.0-1.1
[ 34.681607] usbcore: registered new interface driver usbhid
[ 34.681611] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 54.106052] hdc: lost interrupt
[ 54.106058] hdc: task_in_intr: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.106062] hdc: task_in_intr: error=0x00 { }
[ 54.133743] eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:98:8e:61, irq 17.
[ 54.148100] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 54.484784] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484791] hdc: status error: error=0x00 { }
[ 54.484796] hdc: drive not ready for command
[ 54.484803] hdc: ATAPI CD-ROM drive, 0kB Cache
[ 54.484833] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484837] hdc: status error: error=0x00 { }
[ 54.484840] hdc: drive not ready for command
[ 54.484863] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484866] hdc: status error: error=0x00 { }
[ 54.484869] hdc: drive not ready for command
[ 54.484892] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484895] hdc: status error: error=0x00 { }
[ 54.484898] hdc: drive not ready for command
[ 54.484920] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484924] hdc: status error: error=0x00 { }
[ 54.484926] hdc: drive not ready for command
[ 54.484949] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484952] hdc: status error: error=0x00 { }
[ 54.484955] hdc: drive not ready for command
[ 54.484978] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484981] hdc: status error: error=0x00 { }
[ 54.484984] hdc: drive not ready for command
[ 54.485006] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.485010] hdc: status error: error=0x00 { }
[ 54.485013] hdc: drive not ready for command
[ 54.498238] hdd: ATAPI 48X DVD-ROM drive, 256kB Cache
[ 54.579174] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb
14 17:51:09 PST 2008
[ 54.836440] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.836447] hdc: status error: error=0x00 { }
[ 54.836453] hdc: drive not ready for command
[ 55.036149] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 55.036156] hdc: status error: error=0x00 { }
[ 55.036162] hdc: drive not ready for command
[ 55.235949] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 55.235956] hdc: status error: error=0x00 { }
[ 55.235962] hdc: drive not ready for command
[ 57.597618] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597625] hdc: status error: error=0x00 { }
[ 57.597632] hdc: drive not ready for command
[ 57.597664] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597668] hdc: status error: error=0x00 { }
[ 57.597671] hdc: drive not ready for command
[ 57.597695] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597698] hdc: status error: error=0x00 { }
[ 57.597701] hdc: drive not ready for command
[ 57.597724] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597727] hdc: status error: error=0x00 { }
[ 57.597730] hdc: drive not ready for command
[ 57.597752] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597756] hdc: status error: error=0x00 { }
[ 57.597759] hdc: drive not ready for command
[ 57.643650] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643656] hdc: status error: error=0x00 { }
[ 57.643661] hdc: drive not ready for command
[ 57.643685] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643689] hdc: status error: error=0x00 { }
[ 57.643692] hdc: drive not ready for command
[ 57.643716] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643719] hdc: status error: error=0x00 { }
[ 57.643722] hdc: drive not ready for command
[ 57.643744] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643748] hdc: status error: error=0x00 { }
[ 57.643751] hdc: drive not ready for command
[ 57.643773] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643777] hdc: status error: error=0x00 { }
[ 57.643779] hdc: drive not ready for command
[ 57.728728] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728734] hdc: status error: error=0x00 { }
[ 57.728739] hdc: drive not ready for command
[ 57.728762] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728766] hdc: status error: error=0x00 { }
[ 57.728769] hdc: drive not ready for command
[ 57.728792] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728796] hdc: status error: error=0x00 { }
[ 57.728799] hdc: drive not ready for command
[ 57.728822] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728825] hdc: status error: error=0x00 { }
[ 57.728828] hdc: drive not ready for command
[ 57.728859] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728862] hdc: status error: error=0x00 { }
[ 57.728865] hdc: drive not ready for command
[ 57.728887] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728891] hdc: status error: error=0x00 { }
[ 57.728894] hdc: drive not ready for command
[ 57.728916] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728919] hdc: status error: error=0x00 { }
[ 57.728922] hdc: drive not ready for command
[ 57.728944] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728948] hdc: status error: error=0x00 { }
[ 57.728950] hdc: drive not ready for command
[ 57.728972] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728976] hdc: status error: error=0x00 { }
[ 57.728979] hdc: drive not ready for command
[ 57.729001] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.729005] hdc: status error: error=0x00 { }
[ 57.729008] hdc: drive not ready for command
[ 57.729030] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.729033] hdc: status error: error=0x00 { }
[ 57.729036] hdc: drive not ready for command
[ 57.729076] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.729079] hdc: status error: error=0x00 { }
[ 57.729084] hdc: drive not ready for command
[ 62.725454] hdc: status timeout: status=0x98 { Busy }
[ 62.725459] hdc: DMA disabled
[ 62.725485] hdc: drive not ready for command
[ 62.772422] hdc: ATAPI reset complete
[ 62.774703] hdc: tray open
[ 62.776058] end_request: I/O error, dev hdc, sector 18446744073705406048
[ 62.778419] hdc: tray open
[ 62.779545] end_request: I/O error, dev hdc, sector 18446744067866936064
[ 62.780108] hdc: tray open
[ 62.781477] end_request: I/O error, dev hdc, sector 18446744067866935840
[ 65.191699] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
4200+ processors (2 cpu cores) (version 2.20.00)
[ 70.052683] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[ 77.823179] eth0: no IPv6 routers present
[EMAIL PROTECTED]:~$ clear
[EMAIL PROTECTED]:~$ dmesg | grep hd*
[ 0.000000] Linux version 2.6.24-16-generic ([EMAIL PROTECTED]) (gcc version
4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu
2.6.24-16.30-generic)
[ 0.000000] Command line: root=UUID=7c769cd3-6c8c-41ca-bbb7-6fa946cfdd61 ro
quiet splash locale=es_ES
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F9A50 checksum 0
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] CPU has 2 num_cores
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] DMA zone: 2735 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 513002 pages, LIFO batch:31
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Kernel command line:
root=UUID=7c769cd3-6c8c-41ca-bbb7-6fa946cfdd61 ro quiet splash locale=es_ES
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 15.938424] Marking TSC unstable due to TSCs unsynchronized
[ 15.940594] Checking aperture...
[ 16.036382] Failure registering capabilities with primary security module.
[ 16.036523] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 16.037786] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 16.038391] Mount-cache hash table entries: 256
[ 16.038513] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.038515] CPU: L2 Cache: 512K (64 bytes/line)
[ 16.038519] CPU: Physical Processor ID: 0
[ 16.038539] SMP alternatives: switching to UP code
[ 16.402732] SMP alternatives: switching to SMP code
[ 16.490596] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.490598] CPU: L2 Cache: 512K (64 bytes/line)
[ 16.490601] CPU: Physical Processor ID: 0
[ 16.490677] AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 16.490679] Brought up 2 CPUs
[ 16.490852] CPU0 attaching sched-domain:
[ 16.490862] CPU1 attaching sched-domain:
[ 16.513587] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB]
- 80, should be 72 [20070126]
[ 16.517240] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 16.538572] system 00:08: ioport range 0x480-0x48f has been reserved
[ 16.538574] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 16.538579] system 00:08: ioport range 0x400-0x40f has been reserved
[ 16.538587] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 16.538592] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 16.538594] system 00:09: iomem range 0xfec10000-0xfec10fff has been reserved
[ 16.538602] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 16.538611] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 16.542525] Time: acpi_pm clocksource has been installed.
[ 16.542536] Switched to high resolution mode on CPU 0
[ 16.542655] Switched to high resolution mode on CPU 1
[ 16.574555] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.575233] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 16.577738] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 16.578352] TCP: Hash tables configured (established 262144 bind 65536)
[ 16.586591] checking if image is initramfs... it is
[ 17.174964] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 17.175062] io scheduler noop registered
[ 17.175064] io scheduler anticipatory registered
[ 17.175065] io scheduler deadline registered
[ 17.175161] io scheduler cfq registered (default)
[ 17.271212] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 17.272576] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 17.291313] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open
rtc device (rtc0)
[ 18.741555] ahci 0000:03:00.0: version 3.0
[ 18.790551] usbcore: registered new interface driver hub
[ 18.791358] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 19.743364] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1
impl SATA mode
[ 19.743369] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 19.743520] scsi0 : ahci
[ 20.384984] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 20.389563] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 20.389817] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 1
[ 20.389839] ohci_hcd 0000:00:13.0: irq 20, io mem 0xfebfe000
[ 20.394996] Driver 'sd' needs updating - please use bus_type methods
[ 20.406764] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 20.406791] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 20.406845] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 20.406865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 20.433856] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.437885] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.444787] usb usb1: configuration #1 chosen from 1 choice
[ 20.444811] hub 1-0:1.0: USB hub found
[ 20.444819] hub 1-0:1.0: 3 ports detected
[ 20.546857] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 20.546921] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 2
[ 20.546941] ohci_hcd 0000:00:13.1: irq 21, io mem 0xfebfd000
[ 20.608568] usb usb2: configuration #1 chosen from 1 choice
[ 20.608591] hub 2-0:1.0: USB hub found
[ 20.608597] hub 2-0:1.0: 3 ports detected
[ 20.710651] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 20.710712] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 3
[ 20.710732] ohci_hcd 0000:00:13.2: irq 22, io mem 0xfebfc000
[ 20.768419] usb usb3: configuration #1 chosen from 1 choice
[ 20.768449] hub 3-0:1.0: USB hub found
[ 20.768455] hub 3-0:1.0: 3 ports detected
[ 20.850275] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 20.870605] ehci_hcd 0000:00:13.3: EHCI Host Controller
[ 20.870670] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus
number 4
[ 20.870702] ehci_hcd 0000:00:13.3: debug port 1
[ 20.870716] ehci_hcd 0000:00:13.3: irq 23, io mem 0xfebff800
[ 21.038055] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 21.038159] usb usb4: configuration #1 chosen from 1 choice
[ 21.038181] hub 4-0:1.0: USB hub found
[ 21.038192] hub 4-0:1.0: 8 ports detected
[ 21.147616] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.147623] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 21.945617] sd 1:0:0:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
[ 21.945641] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 21.945681] sd 1:0:0:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
[ 21.945700] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 21.987096] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 21.987133] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 21.987328] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio,
hdb:pio
[ 21.987338] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA,
hdd:DMA
[ 22.201419] PM: Checking swsusp image.
[ 22.473646] usb 1-1: new full speed USB device using ohci_hcd and address 4
[ 22.684736] usb 1-1: configuration #1 chosen from 1 choice
[ 22.687669] hub 1-1:1.0: USB hub found
[ 22.690649] hub 1-1:1.0: 4 ports detected
[ 23.117005] usb 1-2: new low speed USB device using ohci_hcd and address 5
[ 23.324161] usb 1-2: configuration #1 chosen from 1 choice
[ 23.343959] hdd: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
[ 23.537882] usb 1-1.1: new low speed USB device using ohci_hcd and address 6
[ 23.646860] usb 1-1.1: configuration #1 chosen from 1 choice
[ 24.128174] hdc: PHILIPS PBDV1640P, ATAPI CD/DVD-ROM drive
[ 24.128187] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 24.128501] hdc: UDMA/33 mode selected
[ 24.128823] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 24.132136] hdd: UDMA/33 mode selected
[ 33.446612] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.480487] usbcore: registered new interface driver hiddev
[ 34.541697] input,hidraw0: USB HID v1.00 Mouse [HID 1241:1111] on
usb-0000:00:13.0-2
[ 34.601585] input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard]
on usb-0000:00:13.0-1.1
[ 34.681587] input,hiddev96,hidraw2: USB HID v1.10 Mouse [USB-compliant
keyboard] on usb-0000:00:13.0-1.1
[ 34.681607] usbcore: registered new interface driver usbhid
[ 34.681611] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 54.106052] hdc: lost interrupt
[ 54.106058] hdc: task_in_intr: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.106062] hdc: task_in_intr: error=0x00 { }
[ 54.133743] eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:98:8e:61, irq 17.
[ 54.148100] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 54.484784] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484791] hdc: status error: error=0x00 { }
[ 54.484796] hdc: drive not ready for command
[ 54.484803] hdc: ATAPI CD-ROM drive, 0kB Cache
[ 54.484833] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484837] hdc: status error: error=0x00 { }
[ 54.484840] hdc: drive not ready for command
[ 54.484863] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484866] hdc: status error: error=0x00 { }
[ 54.484869] hdc: drive not ready for command
[ 54.484892] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484895] hdc: status error: error=0x00 { }
[ 54.484898] hdc: drive not ready for command
[ 54.484920] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484924] hdc: status error: error=0x00 { }
[ 54.484926] hdc: drive not ready for command
[ 54.484949] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484952] hdc: status error: error=0x00 { }
[ 54.484955] hdc: drive not ready for command
[ 54.484978] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.484981] hdc: status error: error=0x00 { }
[ 54.484984] hdc: drive not ready for command
[ 54.485006] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.485010] hdc: status error: error=0x00 { }
[ 54.485013] hdc: drive not ready for command
[ 54.498238] hdd: ATAPI 48X DVD-ROM drive, 256kB Cache
[ 54.579174] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb
14 17:51:09 PST 2008
[ 54.836440] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 54.836447] hdc: status error: error=0x00 { }
[ 54.836453] hdc: drive not ready for command
[ 55.036149] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 55.036156] hdc: status error: error=0x00 { }
[ 55.036162] hdc: drive not ready for command
[ 55.235949] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 55.235956] hdc: status error: error=0x00 { }
[ 55.235962] hdc: drive not ready for command
[ 57.597618] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597625] hdc: status error: error=0x00 { }
[ 57.597632] hdc: drive not ready for command
[ 57.597664] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597668] hdc: status error: error=0x00 { }
[ 57.597671] hdc: drive not ready for command
[ 57.597695] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597698] hdc: status error: error=0x00 { }
[ 57.597701] hdc: drive not ready for command
[ 57.597724] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597727] hdc: status error: error=0x00 { }
[ 57.597730] hdc: drive not ready for command
[ 57.597752] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.597756] hdc: status error: error=0x00 { }
[ 57.597759] hdc: drive not ready for command
[ 57.643650] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643656] hdc: status error: error=0x00 { }
[ 57.643661] hdc: drive not ready for command
[ 57.643685] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643689] hdc: status error: error=0x00 { }
[ 57.643692] hdc: drive not ready for command
[ 57.643716] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643719] hdc: status error: error=0x00 { }
[ 57.643722] hdc: drive not ready for command
[ 57.643744] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643748] hdc: status error: error=0x00 { }
[ 57.643751] hdc: drive not ready for command
[ 57.643773] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.643777] hdc: status error: error=0x00 { }
[ 57.643779] hdc: drive not ready for command
[ 57.728728] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728734] hdc: status error: error=0x00 { }
[ 57.728739] hdc: drive not ready for command
[ 57.728762] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728766] hdc: status error: error=0x00 { }
[ 57.728769] hdc: drive not ready for command
[ 57.728792] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728796] hdc: status error: error=0x00 { }
[ 57.728799] hdc: drive not ready for command
[ 57.728822] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728825] hdc: status error: error=0x00 { }
[ 57.728828] hdc: drive not ready for command
[ 57.728859] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728862] hdc: status error: error=0x00 { }
[ 57.728865] hdc: drive not ready for command
[ 57.728887] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728891] hdc: status error: error=0x00 { }
[ 57.728894] hdc: drive not ready for command
[ 57.728916] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728919] hdc: status error: error=0x00 { }
[ 57.728922] hdc: drive not ready for command
[ 57.728944] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728948] hdc: status error: error=0x00 { }
[ 57.728950] hdc: drive not ready for command
[ 57.728972] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.728976] hdc: status error: error=0x00 { }
[ 57.728979] hdc: drive not ready for command
[ 57.729001] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.729005] hdc: status error: error=0x00 { }
[ 57.729008] hdc: drive not ready for command
[ 57.729030] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.729033] hdc: status error: error=0x00 { }
[ 57.729036] hdc: drive not ready for command
[ 57.729076] hdc: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[ 57.729079] hdc: status error: error=0x00 { }
[ 57.729084] hdc: drive not ready for command
[ 62.725454] hdc: status timeout: status=0x98 { Busy }
[ 62.725459] hdc: DMA disabled
[ 62.725485] hdc: drive not ready for command
[ 62.772422] hdc: ATAPI reset complete
[ 62.774703] hdc: tray open
[ 62.776058] end_request: I/O error, dev hdc, sector 18446744073705406048
[ 62.778419] hdc: tray open
[ 62.779545] end_request: I/O error, dev hdc, sector 18446744067866936064
[ 62.780108] hdc: tray open
[ 62.781477] end_request: I/O error, dev hdc, sector 18446744067866935840
[ 65.191699] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
4200+ processors (2 cpu cores) (version 2.20.00)
[ 70.052683] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[ 77.823179] eth0: no IPv6 routers present
--
hdc: drive not ready for command
https://bugs.launchpad.net/bugs/221528
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
