Booting with the i386 version of the LiveCD (required because of 1386
limitation to read-edid) was fine - correct screen res detected, nv
driver installed, progress bar during boot. All the problems I've seen
have been in the 64-bit LiveCD. Here's the output of get-edid:
get-edid: get-edid version 1.4.1
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0x11110 "NVIDIA"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination does not support DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/12553235/Xorg.0.log
--
Suspend fails on Sony Vaio SZ650, nVidia 8400M GS and nvidia-glx-new
https://bugs.launchpad.net/bugs/196596
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
