Upgraded to Hardy kernel as described in the instructions at:
http://sudan.ubuntuforums.com/showthread.php?t=646755&page=33

uname -r:
2.6.24-11-generic

On the 32 bit machine, everything seems OK so far. Continuous playing of
flac files for 14 hours did not induce an oops. With Gutsy kernel, the
machine oopsed usually within 30 minutes of  playing. So, most likely,
the problem has been fixed in the Hardy kernel.

------------------------------

On the AMD64 machine, I cannot test because I hit a regression: The
machine can not boot with the Hardy kernel:

ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
ata2: SATA link down
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3: failed to recover some devices, retrying in 5 secs
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3: failed to recover some devices, retrying in 5 secs
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3: failed to recover some devices, retrying in 5 secs
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
ata4: SATA link down

And subsequently fails to mount the root filesystem. Note that these
error messages are copied by hand from the boot screen, so there might
be typing errors. I don't have the equipment for getting output from the
serial console.

Asus A8V-XE motherboard
SATA controller: Via Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller
I have a SATA hard disk attached to port 1 and a SATA DVD-burner attached to 
port 3.
No other disks. No problems with the Gutsy kernel.

-- 
NFSv4 related client kernel oops
https://bugs.launchpad.net/bugs/191042
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to