Public bug reported:
Binary package hint: linux-image-2.6.22-14-generic
Gutsy gibbon, AMD Athlon(TM) XP 2600+, 2.6.22-14-generic
Playing music files (with xmms) from NFSv4 mounted folders causes kernel oops.
The oopsed computer gets unresponsive, but dmesg output can be obtained by
ssh:ing into the system.
/etc/fstab:
linukka:/media /mnt/media nfs4 proto=tcp,port=2049 0 0
dmesg output:
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262139
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262139
[ 0.000000] On node 0 totalpages: 262139
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32508 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F5E30 checksum 0
[ 0.000000] ACPI: RSDP 000F5E30, 0014 (r0 ASUS )
[ 0.000000] ACPI: RSDT 3FFFB000, 0030 (r1 ASUS A7V600-X 42302E31 MSFT
31313031)
[ 0.000000] ACPI: FACP 3FFFB0B2, 0074 (r1 ASUS A7V600-X 42302E31 MSFT
31313031)
[ 0.000000] ACPI: DSDT 3FFFB126, 3098 (r1 ASUS A7V600-X 1000 MSFT
100000B)
[ 0.000000] ACPI: FACS 3FFFF000, 0040
[ 0.000000] ACPI: BOOT 3FFFB030, 0028 (r1 ASUS A7V600-X 42302E31 MSFT
31313031)
[ 0.000000] ACPI: APIC 3FFFB058, 005A (r1 ASUS A7V600-X 42302E31 MSFT
31313031)
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[ 0.000000] Built 1 zonelists. Total pages: 260092
[ 0.000000] Kernel command line:
root=UUID=e1f97eac-ecea-419e-b428-8507e56d5354 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1916.544 MHz processor.
[ 19.402861] Console: colour VGA+ 80x25
[ 19.403701] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 19.404342] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 19.440671] Memory: 1027936k/1048556k available (2015k kernel code, 19944k
reserved, 916k data, 364k init, 131052k highmem)
[ 19.440683] virtual kernel memory layout:
[ 19.440684] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 19.440685] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.440687] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 19.440688] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 19.440689] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 19.440691] .data : 0xc02f7e66 - 0xc03dce84 ( 916 kB)
[ 19.440692] .text : 0xc0100000 - 0xc02f7e66 (2015 kB)
[ 19.440696] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 19.440751] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1,
Nodes=1
[ 19.520733] Calibrating delay using timer specific routine.. 3836.63
BogoMIPS (lpj=7673278)
[ 19.520776] Security Framework v1.0.0 initialized
[ 19.520786] SELinux: Disabled at boot.
[ 19.520806] Mount-cache hash table entries: 512
[ 19.520997] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000
00000000 00000000 00000000 00000000
[ 19.521009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 19.521012] CPU: L2 Cache: 512K (64 bytes/line)
[ 19.521016] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420
00000000 00000000 00000000
[ 19.521030] Compat vDSO mapped to ffffe000.
[ 19.521047] Checking 'hlt' instruction... OK.
[ 19.536909] SMP alternatives: switching to UP code
[ 19.537274] Freeing SMP alternatives: 11k freed
[ 19.537664] Early unpacking initramfs... done
[ 19.864690] ACPI: Core revision 20070126
[ 19.864791] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 19.868531] CPU0: AMD Athlon(TM) XP 2600+ stepping 00
[ 19.868565] Total of 1 processors activated (3836.63 BogoMIPS).
[ 19.869278] ENABLING IO-APIC IRQs
[ 19.869589] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 20.016535] Brought up 1 CPUs
[ 20.016709] Booting paravirtualized kernel on bare hardware
[ 20.016794] Time: 16:51:42 Date: 01/11/108
[ 20.016824] NET: Registered protocol family 16
[ 20.016939] EISA bus registered
[ 20.016955] ACPI: bus type pci registered
[ 20.018084] PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
[ 20.018087] PCI: Using configuration type 1
[ 20.018089] Setting up standard PCI resources
[ 20.030438] ACPI: EC: Look up EC in DSDT
[ 20.035868] ACPI: Interpreter enabled
[ 20.035871] ACPI: (supports S0 S1 S4 S5)
[ 20.035887] ACPI: Using IOAPIC for interrupt routing
[ 20.041964] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.041974] PCI: Probing PCI hardware (bus 00)
[ 20.042468] PCI: enabled onboard AC97/MC97 devices
[ 20.042721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.042888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 20.045099] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 20.045176] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0,
disabled.
[ 20.045249] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0,
disabled.
[ 20.045322] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12)
[ 20.045449] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12)
[ 20.045553] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
[ 20.045673] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12)
[ 20.045763] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15,
disabled.
[ 20.045847] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.045860] pnp: PnP ACPI init
[ 20.045868] ACPI: bus type pnp registered
[ 20.049324] pnp: PnP ACPI: found 13 devices
[ 20.049326] ACPI: ACPI bus type pnp unregistered
[ 20.049331] PnPBIOS: Disabled by ACPI PNP
[ 20.049394] PCI: Using ACPI for IRQ routing
[ 20.049397] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 20.054581] NET: Registered protocol family 8
[ 20.054584] NET: Registered protocol family 20
[ 20.054664] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 20.054668] pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 20.054671] pnp: 00:00: iomem range 0x100000-0x3fffffff could not be reserved
[ 20.054674] pnp: 00:00: iomem range 0xfec00000-0xfec000ff could not be
reserved
[ 20.054680] pnp: 00:02: ioport range 0xe400-0xe47f has been reserved
[ 20.054683] pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
[ 20.054686] pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be
reserved
[ 20.054689] pnp: 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
[ 20.054698] pnp: 00:0c: ioport range 0x290-0x297 has been reserved
[ 20.054701] pnp: 00:0c: ioport range 0x370-0x375 has been reserved
[ 20.056463] Time: tsc clocksource has been installed.
[ 20.085021] PCI: Bridge: 0000:00:01.0
[ 20.085024] IO window: disabled.
[ 20.085029] MEM window: ee000000-efefffff
[ 20.085033] PREFETCH window: eff00000-fbffffff
[ 20.085050] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 20.085062] NET: Registered protocol family 2
[ 20.124499] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.124736] TCP established hash table entries: 131072 (order: 8, 1572864
bytes)
[ 20.127671] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.128649] TCP: Hash tables configured (established 131072 bind 65536)
[ 20.128652] TCP reno registered
[ 20.140592] checking if image is initramfs... it is
[ 20.588193] Switched to high resolution mode on CPU 0
[ 20.761764] Freeing initrd memory: 7076k freed
[ 20.761913] Simple Boot Flag at 0x3a set to 0x1
[ 20.762295] audit: initializing netlink socket (disabled)
[ 20.762313] audit(1202748702.012:1): initialized
[ 20.762395] highmem bounce pool size: 64 pages
[ 20.764377] VFS: Disk quotas dquot_6.5.1
[ 20.764434] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.764546] io scheduler noop registered
[ 20.764548] io scheduler anticipatory registered
[ 20.764551] io scheduler deadline registered
[ 20.764565] io scheduler cfq registered (default)
[ 20.764579] PCI: VIA PCI bridge detected. Disabling DAC.
[ 20.764644] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 20.764653] Boot video device is 0000:01:00.0
[ 20.764829] isapnp: Scanning for PnP cards...
[ 21.118213] isapnp: No Plug & Play device found
[ 21.144355] Real Time Clock Driver v1.12ac
[ 21.144476] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 21.145665] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 21.145905] input: Macintosh mouse button emulation as /class/input/input0
[ 21.145985] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 21.148737] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.148744] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.148963] mice: PS/2 mouse device common for all mice
[ 21.149094] EISA: Probing bus 0 at eisa.0
[ 21.149125] Cannot allocate resource for EISA slot 7
[ 21.149127] Cannot allocate resource for EISA slot 8
[ 21.149129] EISA: Detected 0 cards.
[ 21.149245] TCP cubic registered
[ 21.149255] NET: Registered protocol family 1
[ 21.149278] Using IPI No-Shortcut mode
[ 21.149470] Magic number: 12:835:893
[ 21.149597] hash matches device ptyy3
[ 21.150246] Freeing unused kernel memory: 364k freed
[ 21.232061] input: AT Translated Set 2 keyboard as /class/input/input1
[ 22.370594] fuse init (API version 7.8)
[ 22.376219] Capability LSM initialized
[ 22.969966] SCSI subsystem initialized
[ 22.975112] libata version 2.21 loaded.
[ 22.976427] sata_via 0000:00:0f.0: version 2.2
[ 22.976459] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) ->
IRQ 16
[ 22.976531] sata_via 0000:00:0f.0: routed to hard irq line 0
[ 22.976671] scsi0 : sata_via
[ 22.976726] scsi1 : sata_via
[ 22.976928] ata1: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b002 bmdma
0x0001a000 irq 16
[ 22.976932] ata2: SATA max UDMA/133 cmd 0x0001a800 ctl 0x0001a402 bmdma
0x0001a008 irq 16
[ 22.989288] usbcore: registered new interface driver usbfs
[ 22.989322] usbcore: registered new interface driver hub
[ 22.989349] usbcore: registered new device driver usb
[ 22.990197] USB Universal Host Controller Interface driver v3.0
[ 23.097293] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 23.178607] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 23.204964] Floppy drive(s): fd0 is 1.44M
[ 23.251748] FDC 0 is a post-1991 82077
[ 23.390437] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 23.405550] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.405557] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 23.406227] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 23.406250] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) ->
IRQ 16
[ 23.406263] VP_IDE: chipset revision 6
[ 23.406265] VP_IDE: not 100% native mode: will probe irqs later
[ 23.406277] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[ 23.406287] ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA,
hdb:pio
[ 23.406302] ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA,
hdd:DMA
[ 23.406312] Probing IDE interface ide0...
[ 23.822262] hda: SAMSUNG SP1213N, ATA DISK drive
[ 24.493915] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 24.498125] Probing IDE interface ide1...
[ 25.361320] hdc: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
[ 26.144837] hdd: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
[ 26.201214] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.204387] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) ->
IRQ 17
[ 26.204401] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 26.204733] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[ 26.204764] uhci_hcd 0000:00:10.0: irq 17, io base 0x00009000
[ 26.205155] usb usb1: configuration #1 chosen from 1 choice
[ 26.205303] hub 1-0:1.0: USB hub found
[ 26.205315] hub 1-0:1.0: 2 ports detected
[ 26.212088] hda: max request size: 512KiB
[ 26.224973] hda: 234493056 sectors (120060 MB) w/8192KiB Cache,
CHS=16383/255/63, UDMA(100)
[ 26.226481] hda: cache flushes supported
[ 26.226537] hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
[ 26.288114] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 26.288124] Uniform CD-ROM driver Revision: 3.20
[ 26.290098] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 26.308868] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) ->
IRQ 17
[ 26.308885] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 26.308918] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[ 26.308943] uhci_hcd 0000:00:10.1: irq 17, io base 0x00008800
[ 26.309053] usb usb2: configuration #1 chosen from 1 choice
[ 26.309081] hub 2-0:1.0: USB hub found
[ 26.309091] hub 2-0:1.0: 2 ports detected
[ 26.412748] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) ->
IRQ 17
[ 26.412766] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 26.412796] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 3
[ 26.412820] uhci_hcd 0000:00:10.2: irq 17, io base 0x00008400
[ 26.412941] usb usb3: configuration #1 chosen from 1 choice
[ 26.412969] hub 3-0:1.0: USB hub found
[ 26.412980] hub 3-0:1.0: 2 ports detected
[ 26.516704] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) ->
IRQ 17
[ 26.516720] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 26.516749] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 4
[ 26.516774] uhci_hcd 0000:00:10.3: irq 17, io base 0x00008000
[ 26.516903] usb usb4: configuration #1 chosen from 1 choice
[ 26.516939] hub 4-0:1.0: USB hub found
[ 26.516950] hub 4-0:1.0: 2 ports detected
[ 26.530585] Attempting manual resume
[ 26.530590] swsusp: Resume From Partition 3:2
[ 26.530592] PM: Checking swsusp image.
[ 26.530792] PM: Resume from disk failed.
[ 26.546500] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 26.546505] EXT3-fs: write access will be enabled during recovery.
[ 26.620793] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) ->
IRQ 17
[ 26.620810] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 26.620841] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 5
[ 26.620892] ehci_hcd 0000:00:10.4: irq 17, io mem 0xed800000
[ 26.620899] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 26.621006] usb usb5: configuration #1 chosen from 1 choice
[ 26.621034] hub 5-0:1.0: USB hub found
[ 26.621045] hub 5-0:1.0: 8 ports detected
[ 26.704340] kjournald starting. Commit interval 5 seconds
[ 26.704358] EXT3-fs: recovery complete.
[ 26.704700] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.724718] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) ->
IRQ 18
[ 26.724892] eth0: VIA Rhine II at 0x17800, 00:0e:a6:25:2d:69, IRQ 18.
[ 26.725607] eth0: MII PHY found at address 1, status 0x786d advertising 01e1
Link c5e1.
[ 27.875703] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 28.009763] usb 5-5: configuration #1 chosen from 1 choice
[ 28.247474] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 28.422475] usb 2-1: configuration #1 chosen from 1 choice
[ 35.061561] Linux agpgart interface v0.102 (c) Dave Jones
[ 35.087975] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 35.090241] agpgart: AGP aperture is 32M @ 0xfc000000
[ 35.156687] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 35.405524] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 36.647574] nvidia: module license 'NVIDIA' taints kernel.
[ 36.917788] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 19
[ 36.918334] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep
12 14:12:24 PDT 2007
[ 36.945072] usbcore: registered new interface driver libusual
[ 37.096343] Initializing USB Mass Storage driver...
[ 37.096902] scsi2 : SCSI emulation for USB Mass Storage devices
[ 37.097000] usbcore: registered new interface driver usb-storage
[ 37.097003] USB Mass Storage support registered.
[ 37.097132] usb-storage: device found at 3
[ 37.097135] usb-storage: waiting for device to settle before scanning
[ 37.135144] Linux video capture interface: v2.00
[ 37.174962] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) ->
IRQ 20
[ 37.178063] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 37.295152] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control
Chip v1:1.07
[ 37.295216] usb 2-1: ZC0301[P] Image Processor and Control Chip detected
(vid/pid 0x041E:0x401E)
[ 37.380476] usb 2-1: No supported image sensor detected
[ 37.380517] usbcore: registered new interface driver zc0301
[ 37.440880]
/build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c:
USB SPCA5XX camera found.(ZC3XX)
[ 37.570395] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[ 37.572936] parport_pc 00:09: reported by Plug and Play ACPI
[ 37.572972] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 37.574187] input: PC Speaker as /class/input/input3
[ 37.671581] usbcore: registered new interface driver gspca
[ 37.671589]
/build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c:
gspca driver 01.00.12 registered
[ 37.692203] codec_read: codec 0 is not valid [0xfe0000]
[ 37.698428] codec_read: codec 0 is not valid [0xfe0000]
[ 37.704669] codec_read: codec 0 is not valid [0xfe0000]
[ 37.710872] codec_read: codec 0 is not valid [0xfe0000]
[ 37.737171] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[ 37.737184] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) ->
IRQ 20
[ 38.485233] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 38.989130] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[ 38.989141] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 38.989293] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) ->
IRQ 21
[ 40.035313] lp0: using parport0 (interrupt-driven).
[ 40.079456] Adding 1004052k swap on /dev/hda2. Priority:-1 extents:1
across:1004052k
[ 40.392215] EXT3 FS on hda5, internal journal
[ 42.091237] usb-storage: device scan complete
[ 42.091844] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00
PQ: 0 ANSI: 0
[ 42.092460] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01
PQ: 0 ANSI: 0
[ 42.092954] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02
PQ: 0 ANSI: 0
[ 42.093454] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03
PQ: 0 ANSI: 0
[ 42.149647] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 42.150798] sd 2:0:0:1: [sdb] Attached SCSI removable disk
[ 42.151769] sd 2:0:0:2: [sdc] Attached SCSI removable disk
[ 42.153753] sd 2:0:0:3: [sdd] Attached SCSI removable disk
[ 42.174100] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 42.174126] sd 2:0:0:1: Attached scsi generic sg1 type 0
[ 42.174150] sd 2:0:0:2: Attached scsi generic sg2 type 0
[ 42.174172] sd 2:0:0:3: Attached scsi generic sg3 type 0
[ 42.511207] kjournald starting. Commit interval 5 seconds
[ 42.511315] EXT3 FS on hda6, internal journal
[ 42.511320] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.558098] kjournald starting. Commit interval 5 seconds
[ 42.558231] EXT3 FS on hda7, internal journal
[ 42.558234] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.601772] No dock devices found.
[ 44.725107] input: Power Button (FF) as /class/input/input4
[ 44.730341] ACPI: Power Button (FF) [PWRF]
[ 44.772018] input: Power Button (CM) as /class/input/input5
[ 44.777266] ACPI: Power Button (CM) [PWRB]
[ 46.115743] eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 46.379733] NET: Registered protocol family 10
[ 46.380109] lo: Disabled Privacy Extensions
[ 46.584472] ppdev: user-space parallel port driver
[ 46.799586] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 46.799594] apm: overridden by ACPI.
[ 48.493836] Bluetooth: Core ver 2.11
[ 48.493978] NET: Registered protocol family 31
[ 48.493981] Bluetooth: HCI device and connection manager initialized
[ 48.493986] Bluetooth: HCI socket layer initialized
[ 48.510844] Bluetooth: L2CAP ver 2.8
[ 48.510851] Bluetooth: L2CAP socket layer initialized
[ 48.572704] Bluetooth: RFCOMM socket layer initialized
[ 48.572805] Bluetooth: RFCOMM TTY layer initialized
[ 48.572808] Bluetooth: RFCOMM ver 1.8
[ 50.084128] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 50.084151] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 50.084207] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 52.871102] NET: Registered protocol family 17
[ 66.315907] eth1: no IPv6 routers present
[ 1058.240975] BUG: unable to handle kernel NULL pointer dereference at virtual
address 0000000c
[ 1058.240984] printing eip:
[ 1058.240986] f8d9dcf5
[ 1058.240988] *pde = 00000000
[ 1058.240991] Oops: 0000 [#1]
[ 1058.240993] SMP
[ 1058.240997] Modules linked in: af_packet binfmt_misc rfcomm l2cap bluetooth
ppdev ipv6 cpufreq_stats cpufreq_conservative cpufreq_userspace
cpufreq_powersave cpufreq_ondemand freq_table button video sbs dock ac
container battery nfs lockd sunrpc ext2 sg sd_mod lp gspca snd_ice1712
snd_ice17xx_ak4xxx zc0301 snd_ak4xxx_adda snd_cs8427 snd_i2c compat_ioctl32
snd_via82xx_modem snd_pcm_oss snd_mixer_oss snd_via82xx videodev v4l1_compat
snd_seq_dummy gameport usb_storage snd_seq_oss snd_ac97_codec pcspkr parport_pc
parport v4l2_common libusual psmouse ac97_bus nvidia(P) serio_raw
snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_pcm i2c_viapro i2c_core
snd_seq snd_timer snd_rawmidi snd_seq_device snd_page_alloc shpchp snd
soundcore pci_hotplug via_agp agpgart evdev ext3 jbd mbcache ide_cd cdrom
ide_disk via82cxxx ide_core floppy via_rhine mii ehci_hcd uhci_hcd usbcore
ata_generic sata_via libata scsi_mod thermal processor fan capability commoncap
fuse
[ 1058.241061] CPU: 0
[ 1058.241062] EIP: 0060:[<f8d9dcf5>] Tainted: P VLI
[ 1058.241064] EFLAGS: 00010246 (2.6.22-14-generic #1)
[ 1058.241108] EIP is at nfs_update_inode+0xc5/0x6d0 [nfs]
[ 1058.241111] eax: 00000000 ebx: 000081a4 ecx: 000081a4 edx: 00008000
[ 1058.241115] esi: 0000bf1a edi: f46cac00 ebp: e8cec128 esp: df85fe3c
[ 1058.241118] ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068
[ 1058.241121] Process events/0 (pid: 6, ti=df85e000 task=c18e39f0
task.ti=df85e000)
[ 1058.241123] Stack: e8cec128 c02f314b 00000001 e88cd080 00000004 00000000
c18e39f0 f34204b0
[ 1058.241130] e8cec000 df85fe80 e8cec128 0002d1c6 c01320c5 e88cd000
00000000 e8cec128
[ 1058.241136] f34204b0 e88cd000 e8cec128 f8d9f6d4 f3420400 00000000
f8dad5bb f3420400
[ 1058.241142] Call Trace:
[ 1058.241147] [<c02f314b>] out_of_line_wait_on_bit+0x7b/0x90
[ 1058.241166] [<c01320c5>] sigprocmask+0x65/0x100
[ 1058.241179] [<f8d9f6d4>] nfs_post_op_update_inode+0x24/0x50 [nfs]
[ 1058.241195] [<f8dad5bb>] nfs4_proc_delegreturn+0x17b/0x180 [nfs]
[ 1058.241227] [<f8db9927>] nfs_do_return_delegation+0x17/0x30 [nfs]
[ 1058.241251] [<f8d9c2e9>] nfs_dentry_iput+0x29/0x80 [nfs]
[ 1058.241266] [<c0191f82>] shrink_dcache_for_umount_subtree+0x82/0x230
[ 1058.241278] [<c011fff9>] __wake_up_common+0x39/0x60
[ 1058.241288] [<c0192da7>] shrink_dcache_for_umount+0x37/0x50
[ 1058.241293] [<c01822a8>] generic_shutdown_super+0x18/0xf0
[ 1058.241300] [<c0196a0b>] free_vfsmnt+0xb/0x20
[ 1058.241305] [<c01823a9>] kill_anon_super+0x9/0x40
[ 1058.241310] [<f8da031c>] nfs_kill_super+0xc/0x20 [nfs]
[ 1058.241324] [<c018245d>] deactivate_super+0x5d/0x80
[ 1058.241330] [<c0197192>] expire_mount_list+0xc2/0x140
[ 1058.241341] [<c0198410>] mark_mounts_for_expiry+0x90/0xb0
[ 1058.241349] [<f8da78c0>] nfs_expire_automounts+0x0/0x30 [nfs]
[ 1058.241363] [<f8da78ca>] nfs_expire_automounts+0xa/0x30 [nfs]
[ 1058.241377] [<c0138331>] run_workqueue+0x81/0x110
[ 1058.241385] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 1058.241393] [<c0138d30>] worker_thread+0x0/0x100
[ 1058.241397] [<c0138dd0>] worker_thread+0xa0/0x100
[ 1058.241403] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 1058.241411] [<c0138d30>] worker_thread+0x0/0x100
[ 1058.241414] [<c013bb12>] kthread+0x42/0x70
[ 1058.241418] [<c013bad0>] kthread+0x0/0x70
[ 1058.241423] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 1058.241434] =======================
[ 1058.241436] Code: 0f ba ab 8c 00 00 00 02 89 e8 e8 e7 fc ff ff b8 8c ff ff
ff 83 c4 3c 5b 5e 5f 5d c3 8b 85 98 00 00 00 8b b8 64 01 00 00 8b 40 38 <3b> 68
0c 0f 84 57 04 00 00 8b 54 24 1c 8b 4c 24 20 8b 82 8c 00
[ 1058.241459] EIP: [<f8d9dcf5>] nfs_update_inode+0xc5/0x6d0 [nfs] SS:ESP
0068:df85fe3c
** Affects: linux-source-2.6.22 (Ubuntu)
Importance: Undecided
Status: New
--
NFSv4 related client kernel oops
https://bugs.launchpad.net/bugs/191042
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
