usbmon output attached. Need someone to interpret this. Sending email to
linux-usb.
** Summary changed:
- hald hangs USB camera/resets USB
+ udev hangs USB camera/resets USB
** Description changed:
- Binary package hint: hal
+ Binary package hint: udev
From: Grant Grundler <[EMAIL PROTECTED]>
To: Ubuntu Bug Tracking System <[EMAIL PROTECTED]>
From: Grant Grundler <[EMAIL PROTECTED]>
Cc: Grant Grundler <[EMAIL PROTECTED]>
Subject: /usr/sbin/hald: hald confuses HP R707 camera in USB-Storage mode
Message-ID: <[EMAIL PROTECTED]>
X-Mailer: reportbug 3.38ubuntu2
Date: Fri, 04 Jan 2008 17:15:33 -0800
Package: hal
Version: 0.5.9.1-6ubuntu5
Severity: normal
File: /usr/sbin/hald
hald was crashing the HP R707 camera that was set in "USB Storage" mode.
Stopping hald (/etc/init.d/hal stop) allowed me to
dd if=/dev/sdb1 of=tmpfile
the entire 256MB SD card. (I initially tried with 32MB SD card in the
camera as output below will show).
If I connect the device while hald is running, I get the follow dmesg
output. Eveything is good up to "Attached scsi generic sg1 type 0"
output. "reset" is because hald is doing something and results in the
deivce going "offline". As noted above, stopping hald allows me to read
from the device.
[877591.083986] usb 1-1.1.2: new full speed USB device using uhci_hcd and
address 53
[877591.206165] usb 1-1.1.2: configuration #1 chosen from 1 choice
[877591.209825] scsi13 : SCSI emulation for USB Mass Storage devices
[877591.210670] usb-storage: device found at 53
[877591.210679] usb-storage: waiting for device to settle before scanning
[877596.207195] usb-storage: device scan complete
[877596.210222] scsi scan: INQUIRY result too short (5), using 36
[877596.210244] scsi 13:0:0:0: Direct-Access HP PhotoSmart R707
A001 PQ: 0 ANSI: 0
[877596.217133] sd 13:0:0:0: [sdb] 60801 512-byte hardware sectors (31 MB)
[877596.220127] sd 13:0:0:0: [sdb] Write Protect is off
[877596.220143] sd 13:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[877596.220151] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[877596.229117] sd 13:0:0:0: [sdb] 60801 512-byte hardware sectors (31 MB)
[877596.232122] sd 13:0:0:0: [sdb] Write Protect is off
[877596.232137] sd 13:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[877596.232144] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[877596.232155] sdb: sdb1
[877596.242212] sd 13:0:0:0: [sdb] Attached SCSI removable disk
[877596.242325] sd 13:0:0:0: Attached scsi generic sg1 type 0
[877626.715068] usb 1-1.1.2: reset full speed USB device using uhci_hcd and
address 53
[877636.889376] usb 1-1.1.2: reset full speed USB device using uhci_hcd and
address 53
[877642.064490] usb 1-1.1.2: reset full speed USB device using uhci_hcd and
address 53
[877652.239811] usb 1-1.1.2: reset full speed USB device using uhci_hcd and
address 53
[877652.347289] sd 13:0:0:0: scsi: Device offlined - not ready after error
recovery
[877652.347316] sd 13:0:0:0: [sdb] Result: hostbyte=DID_ABORT
driverbyte=DRIVER_OK,SUGGEST_OK
[877652.347329] end_request: I/O error, dev sdb, sector 60800
[877652.347340] Buffer I/O error on device sdb, logical block 60800
[877652.353107] sd 13:0:0:0: rejecting I/O to offline device
[877652.353131] Buffer I/O error on device sdb, logical block 60800
[877652.353585] sd 13:0:0:0: rejecting I/O to offline device
[877652.353596] Buffer I/O error on device sdb, logical block 60792
[877652.353974] sd 13:0:0:0: rejecting I/O to offline device
[877652.353984] Buffer I/O error on device sdb, logical block 60793
[877652.354360] sd 13:0:0:0: rejecting I/O to offline device
[877652.354370] Buffer I/O error on device sdb, logical block 60794
[877652.354747] sd 13:0:0:0: rejecting I/O to offline device
[877652.354757] Buffer I/O error on device sdb, logical block 60795
[877652.355191] sd 13:0:0:0: rejecting I/O to offline device
[877652.355202] Buffer I/O error on device sdb, logical block 60796
[877652.355578] sd 13:0:0:0: rejecting I/O to offline device
[877652.355588] Buffer I/O error on device sdb, logical block 60797
[877652.355964] sd 13:0:0:0: rejecting I/O to offline device
[877652.355975] Buffer I/O error on device sdb, logical block 60798
[877652.356350] sd 13:0:0:0: rejecting I/O to offline device
[877652.356360] Buffer I/O error on device sdb, logical block 60799
[877652.356741] sd 13:0:0:0: rejecting I/O to offline device
[877652.356933] sd 13:0:0:0: rejecting I/O to offline device
[877652.357126] sd 13:0:0:0: rejecting I/O to offline device
[877652.357320] sd 13:0:0:0: rejecting I/O to offline device
[877652.357514] sd 13:0:0:0: rejecting I/O to offline device
[877652.357706] sd 13:0:0:0: rejecting I/O to offline device
[877652.357899] sd 13:0:0:0: rejecting I/O to offline device
[877652.358093] sd 13:0:0:0: rejecting I/O to offline device
[877652.358304] sd 13:0:0:0: rejecting I/O to offline device
[877652.358511] sd 13:0:0:0: rejecting I/O to offline device
[877652.358720] sd 13:0:0:0: rejecting I/O to offline device
[877652.358964] sd 13:0:0:0: rejecting I/O to offline device
[877652.359158] sd 13:0:0:0: rejecting I/O to offline device
[877652.359351] sd 13:0:0:0: rejecting I/O to offline device
[877652.359543] sd 13:0:0:0: rejecting I/O to offline device
[877652.359737] sd 13:0:0:0: rejecting I/O to offline device
[877652.359931] sd 13:0:0:0: rejecting I/O to offline device
[877652.360124] sd 13:0:0:0: rejecting I/O to offline device
[877652.360316] sd 13:0:0:0: rejecting I/O to offline device
[877652.360533] sd 13:0:0:0: rejecting I/O to offline device
[877652.360728] sd 13:0:0:0: rejecting I/O to offline device
[877652.360921] sd 13:0:0:0: rejecting I/O to offline device
[877652.361114] sd 13:0:0:0: rejecting I/O to offline device
[877652.361307] sd 13:0:0:0: rejecting I/O to offline device
[877652.361500] sd 13:0:0:0: rejecting I/O to offline device
[877652.361693] sd 13:0:0:0: rejecting I/O to offline device
[877652.361887] sd 13:0:0:0: rejecting I/O to offline device
[877652.362110] sd 13:0:0:0: rejecting I/O to offline device
[877652.362319] sd 13:0:0:0: rejecting I/O to offline device
[877652.362762] sd 13:0:0:0: rejecting I/O to offline device
[877652.364393] sd 13:0:0:0: rejecting I/O to offline device
[877652.364621] sd 13:0:0:0: rejecting I/O to offline device
[877652.364814] sd 13:0:0:0: rejecting I/O to offline device
[877652.365008] sd 13:0:0:0: rejecting I/O to offline device
[877652.365202] sd 13:0:0:0: rejecting I/O to offline device
[877652.365395] sd 13:0:0:0: rejecting I/O to offline device
[877652.365588] sd 13:0:0:0: rejecting I/O to offline device
[877652.365904] sd 13:0:0:0: rejecting I/O to offline device
[877652.366099] sd 13:0:0:0: rejecting I/O to offline device
[877652.366293] sd 13:0:0:0: rejecting I/O to offline device
[877652.366486] sd 13:0:0:0: rejecting I/O to offline device
[877652.366684] sd 13:0:0:0: rejecting I/O to offline device
[877652.367094] sd 13:0:0:0: rejecting I/O to offline device
[877652.367291] sd 13:0:0:0: rejecting I/O to offline device
[877652.367485] sd 13:0:0:0: rejecting I/O to offline device
[877652.367728] sd 13:0:0:0: rejecting I/O to offline device
[877652.367924] sd 13:0:0:0: rejecting I/O to offline device
[877652.368118] sd 13:0:0:0: rejecting I/O to offline device
[877652.368312] sd 13:0:0:0: rejecting I/O to offline device
[877652.368507] sd 13:0:0:0: rejecting I/O to offline device
[877652.368701] sd 13:0:0:0: rejecting I/O to offline device
[877652.368895] sd 13:0:0:0: rejecting I/O to offline device
[877652.369089] sd 13:0:0:0: rejecting I/O to offline device
[877652.369315] sd 13:0:0:0: rejecting I/O to offline device
[877652.369511] sd 13:0:0:0: rejecting I/O to offline device
[877652.369706] sd 13:0:0:0: rejecting I/O to offline device
[877652.369900] sd 13:0:0:0: rejecting I/O to offline device
[877652.370094] sd 13:0:0:0: rejecting I/O to offline device
[877652.370289] sd 13:0:0:0: rejecting I/O to offline device
[877652.370483] sd 13:0:0:0: rejecting I/O to offline device
[877652.370677] sd 13:0:0:0: rejecting I/O to offline device
[877652.370971] sd 13:0:0:0: rejecting I/O to offline device
[877652.371168] sd 13:0:0:0: rejecting I/O to offline device
[877652.371362] sd 13:0:0:0: rejecting I/O to offline device
[877652.371557] sd 13:0:0:0: rejecting I/O to offline device
[877652.371751] sd 13:0:0:0: rejecting I/O to offline device
[877652.371945] sd 13:0:0:0: rejecting I/O to offline device
[877652.372139] sd 13:0:0:0: rejecting I/O to offline device
[877652.372334] sd 13:0:0:0: rejecting I/O to offline device
I don't know which command hald is sending that is causing the
problems but I expect with strace I can figure out which one
takes a long time to complete and fails.
I had stopped udev and this had the original /dev/sdb1 present.
I restarted udev and reconnected the camera:
[884994.620480] usb-storage: device scan complete
[884994.624471] scsi scan: INQUIRY result too short (5), using 36
[884994.624490] scsi 23:0:0:0: Direct-Access HP PhotoSmart
R707 A001 PQ: 0 ANSI: 0
[884994.634410] sd 23:0:0:0: [sdb] 494081 512-byte hardware sectors (253
MB)
[884994.637405] sd 23:0:0:0: [sdb] Write Protect is off
[884994.637418] sd 23:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[884994.637426] sd 23:0:0:0: [sdb] Assuming drive cache: write through
[884994.648428] sd 23:0:0:0: [sdb] 494081 512-byte hardware sectors (253
MB)
[884994.651437] sd 23:0:0:0: [sdb] Write Protect is off
[884994.651453] sd 23:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[884994.651461] sd 23:0:0:0: [sdb] Assuming drive cache: write through
[884994.651472] sdb: sdb1
[884994.661489] sd 23:0:0:0: [sdb] Attached SCSI removable disk
[884994.661604] sd 23:0:0:0: Attached scsi generic sg1 type 0
and /dev/sdb* shows:
[EMAIL PROTECTED]:/etc/udev/rules.d # ls -l /dev/sdb*
brw-rw---- 1 root plugdev 8, 16 2008-01-04 17:13 /dev/sdb
brw-rw---- 1 root plugdev 8, 17 2008-01-04 17:13 /dev/sdb1
and I conclude udev is working correctly.
[EMAIL PROTECTED]:~$ cat /proc/partitions
major minor #blocks name
8 0 58605120 sda
8 1 12287992 sda1
8 2 1048824 sda2
8 3 8388576 sda3
8 4 36879696 sda4
8 16 247040 sdb
8 17 246989 sdb1
BTW, this is an "Ubuntu Gutsy" system despite what "reportbug" thinks.
Contents of sources.list:
#deb http://us.archive.ubuntu.com/ubuntu hardy main restricted universe
multiverse
#deb-src http://us.archive.ubuntu.com/ubuntu hardy main restricted universe
multiverse
#deb http://security.ubuntu.com/ubuntu hardy-security main restricted universe
#deb-src http://security.ubuntu.com/ubuntu hardy-security main restricted
universe
deb http://us.archive.ubuntu.com/ubuntu gutsy main restricted universe
multiverse
deb-src http://us.archive.ubuntu.com/ubuntu gutsy main restricted universe
multiverse
deb http://security.ubuntu.com/ubuntu gutsy-security main restricted universe
deb-src http://security.ubuntu.com/ubuntu gutsy-security main restricted
universe
#deb http://us.archive.ubuntu.com/ubuntu edgy main restricted universe
#deb-src http://us.archive.ubuntu.com/ubuntu edgy main restricted universe
#deb http://security.ubuntu.com/ubuntu edgy-security main restricted universe
#deb-src http://security.ubuntu.com/ubuntu edgy-security main restricted
universe
# deb http://us.archive.ubuntu.com/ubuntu dapper main restricted universe
# deb http://us.archive.ubuntu.com/ubuntu dapper-security main restricted
universe
# deb http://packages.dfreer.org feisty main
Since I've upgraded several times, it's probably not a really clean
install...but I don't expect that's the problem in this case.
Please let me know what other information is needed.
cheers,
grant
-- System Information:
Debian Release: lenny/sid
APT prefers gutsy-security
APT policy: (500, 'gutsy-security'), (500, 'gutsy')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-14-generic (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages hal depends on:
ii adduser 3.103ubuntu1 Add and remove users and groups
ii dbus 1.1.1-3ubuntu4 simple interprocess messaging
syst
ii hal-info 20070618-1ubuntu3 Hardware Abstraction Layer - fdi
f
ii libc6 2.6.1-1ubuntu9 GNU C Library: Shared libraries
ii libdbus-1-3 1.1.1-3ubuntu4 simple interprocess messaging
syst
ii libdbus-glib-1-2 0.74-1 simple interprocess messaging
syst
ii libexpat1 1.95.8-4ubuntu1 XML parsing C library - runtime
li
ii libglib2.0-0 2.14.1-1ubuntu1 The GLib library of C routines
ii libhal-storage1 0.5.9.1-6ubuntu5 Hardware Abstraction Layer -
share
ii libhal1 0.5.9.1-6ubuntu5 Hardware Abstraction Layer -
share
ii libusb-0.1-4 2:0.1.12-7 userspace USB programming library
ii lsb-base 3.1-23.1ubuntu3 Linux Standard Base 3.1 init
scrip
ii pciutils 1:2.2.4-1ubuntu2 Linux PCI Utilities
ii udev 113-0ubuntu16 rule-based device node and
kernel
ii usbutils 0.72-8ubuntu1 Linux USB utilities
ii zlib1g 1:1.2.3.3.dfsg-5ubuntu2 compression library - runtime
Versions of packages hal recommends:
ii eject 2.1.5-2ubuntu2 ejects CDs and operates
CD-Changer
-- no debconf information
** Attachment added: "usbmon+dmesg output for 2.6.13"
http://launchpadlibrarian.net/11442310/HPr707-usbmon-2.6.23.13-01.out
--
udev hangs USB camera/resets USB
https://bugs.launchpad.net/bugs/180472
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
