FYI, after correctly setting both mce=off pci=noaer, I booted up ok.
Just setting mce=off resulted in a crash. After booting up, I still see
these messages in dmesg:


[   14.818868] genirq: Flags mismatch irq 0. 00000000 (0000:06:00.1) vs. 
00215a00 (timer)
[   17.518899] clocksource: Long readout interval, skipping watchdog check: 
cs_nsec: 2795340213 wd_nsec: 2795338094
[   17.550967] i2c i2c-7: Successfully instantiated SPD at 0x56
[   17.553505] i2c i2c-7: Successfully instantiated SPD at 0x57
[   17.566615] ae4dma 0000:06:00.1: probe with driver ae4dma failed with error 
-16
[   17.569676] Console: switching to colour dummy device 80x25
[   17.571357] ae4dma 0000:21:00.1: enabling device (0000 -> 0002)
[   17.572644] ipmi_si IPI0001:00: IPMI kcs interface initialized
[   17.589639] ipmi_ssif: IPMI SSIF Interface driver
[   17.599321] genirq: Flags mismatch irq 0. 00000000 (0000:21:00.1) vs. 
00215a00 (timer)
[   20.299338] workqueue: work_for_cpu_fn hogged CPU for >10000us 7 times, 
consider switching to WQ_UNBOUND
[   20.307939] ast 0000:63:00.0: vgaarb: deactivate vga console
[   20.313995] ast 0000:63:00.0: Using default configuration
[   20.314001] ast 0000:63:00.0: AST 2600 detected
[   20.314101] ast 0000:63:00.0: [drm] Using ASPEED DisplayPort transmitter
[   20.314106] ast 0000:63:00.0: [drm] dram MCLK=396 Mhz type=1 bus_width=16
[   20.322326] ae4dma 0000:21:00.1: probe with driver ae4dma failed with error 
-16
[   20.328255] ast 0000:63:00.0: [drm] Registered 1 planes with drm panic
[   20.328260] [drm] Initialized ast 0.1.0 for 0000:63:00.0 on minor 0
[   20.329382] ae4dma 0000:45:00.1: enabling device (0000 -> 0002)
[   20.333122] fbcon: astdrmfb (fb0) is primary device
[   20.334660] genirq: Flags mismatch irq 0. 00000000 (0000:45:00.1) vs. 
00215a00 (timer)
[   23.039505] ae4dma 0000:45:00.1: probe with driver ae4dma failed with error 
-16
[   23.045129] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms 
ovfl timer
[   23.045134] RAPL PMU: hw unit of domain package 2^-16 Joules
[   23.045136] RAPL PMU: hw unit of domain core 2^-16 Joules
[   23.071991] ae4dma 0000:64:00.1: enabling device (0000 -> 0002)
[   23.072689] genirq: Flags mismatch irq 0. 00000000 (0000:64:00.1) vs. 
00215a00 (timer)
[   25.772704] workqueue: pci_pme_list_scan hogged CPU for >10000us 4 times, 
consider switching to WQ_UNBOUND
[   25.772793] Console: switching to colour frame buffer device 128x48
[   25.789970] ast 0000:63:00.0: [drm] fb0: astdrmfb frame buffer device
[   25.808058] ae4dma 0000:64:00.1: probe with driver ae4dma failed with error 
-16
[   25.808235] ae4dma 0000:82:00.1: enabling device (0000 -> 0002)
[   25.809150] genirq: Flags mismatch irq 0. 00000000 (0000:82:00.1) vs. 
00215a00 (timer)
[   28.509161] workqueue: pci_pme_list_scan hogged CPU for >10000us 5 times, 
consider switching to WQ_UNBOUND
[   28.509169] workqueue: work_for_cpu_fn hogged CPU for >10000us 11 times, 
consider switching to WQ_UNBOUND
[   28.509671] ae4dma 0000:82:00.1: probe with driver ae4dma failed with error 
-16
[   28.509869] ae4dma 0000:a2:00.1: enabling device (0000 -> 0002)
[   28.510461] genirq: Flags mismatch irq 0. 00000000 (0000:a2:00.1) vs. 
00215a00 (timer)
[   31.211299] ae4dma 0000:a2:00.1: probe with driver ae4dma failed with error 
-16
[   31.211528] ae4dma 0000:c1:00.1: enabling device (0000 -> 0002)
[   31.223058] genirq: Flags mismatch irq 0. 00000000 (0000:c1:00.1) vs. 
00215a00 (timer)
[   33.923092] workqueue: pci_pme_list_scan hogged CPU for >10000us 7 times, 
consider switching to WQ_UNBOUND
[   33.923930] ae4dma 0000:c1:00.1: probe with driver ae4dma failed with error 
-16
[   33.924148] ae4dma 0000:e1:00.1: enabling device (0000 -> 0002)
[   33.924710] genirq: Flags mismatch irq 0. 00000000 (0000:e1:00.1) vs. 
00215a00 (timer)
[   33.989858] EXT4-fs (nvme10n1p2): mounted filesystem 
7dd4edfe-c36f-4894-b4d2-46d56e949e25 r/w with ordered data mode. Quota mode: 
none.
[   36.641857] ae4dma 0000:e1:00.1: probe with driver ae4dma failed with error 
-16
...

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2106553

Title:
  Epyc Genoa system unable to boot starting with Kernel 6.14.0

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2106553/+subscriptions


-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to