On Sat, Jan 05, 2008 at 02:31:21AM -0000, Grant Grundler wrote: > If I connect the device while hald is running, I get the follow dmesg > output. Eveything is good up to "Attached scsi generic sg1 type 0" > output. "reset" is because hald is doing something and results in the > deivce going "offline". As noted above, stopping hald allows me to read > from the device. ... > [EMAIL PROTECTED]:/etc/udev/rules.d # ls -l /dev/sdb* > brw-rw---- 1 root plugdev 8, 16 2008-01-04 17:13 /dev/sdb > brw-rw---- 1 root plugdev 8, 17 2008-01-04 17:13 /dev/sdb1 > > and I conclude udev is working correctly.
Sorry - this is wrong. Somehow I messed up when trying to triag this bug. udev by itself (without hald) causes the "device offline" issues. I tried to reproduce this with udev running and discovered it was happening anyway. So I can't explain how I reached the conclusion that it was hald. Perhaps there are other problems with hald as well that caused the same sometimes or interactions with udev or the same kernel code invoked by udev. Issues with booting newer kernels on my laptop have made it difficult to track down exactly which command sent to the device is causing problems. Once I track that down, we can decide if this bug should be re-assigned to udev package or whatever is appropriate. It will probably take another week since I very little time outside of work to track this down. again, my apologies for the (likely) misdiagnosis, grant -- hald hangs USB camera/resets USB https://bugs.launchpad.net/bugs/180472 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
