apport information ** Tags added: apport-collected ubuntu
** Description changed: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.01 59.97 59.96 59.93 1680x1050 59.95 59.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.99 59.94 59.95 59.82 1280x1024 60.02 1440x900 59.89 1400x900 59.96 59.88 1280x960 60.00 1440x810 60.00 59.97 1368x768 59.88 59.85 1360x768 59.80 59.96 1280x800 59.99 59.97 59.81 59.91 1152x864 60.00 1280x720 60.00 59.99 59.86 59.74 1024x768 60.04 60.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.95 59.96 59.90 59.82 960x600 59.93 60.00 960x540 59.96 59.99 59.63 59.82 800x600 60.00 60.32 56.25 840x525 60.01 59.88 864x486 59.92 59.57 800x512 60.17 700x525 59.98 800x450 59.95 59.82 640x512 60.02 720x450 59.89 700x450 59.96 59.88 640x480 60.00 59.94 720x405 59.51 58.99 684x384 59.88 59.85 680x384 59.80 59.96 640x400 59.88 59.98 576x432 60.06 640x360 59.86 59.83 59.84 59.32 512x384 60.00 512x288 60.00 59.92 480x270 59.63 59.82 400x300 60.32 56.34 432x243 59.92 59.57 320x240 60.05 360x202 59.51 59.13 320x180 59.84 59.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.00 59.94 1280x720 60.00 50.00 59.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.00 59.94 640x480 60.00 59.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline "Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline "Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline "Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline "Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync Modeline "Mode 4" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync Modeline "Mode 5" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync Modeline "Mode 6" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync Modeline "Mode 7" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync Option "PreferredMode" "Mode 1" EndSection "Mode 0" above is the mode that I want to use, which doesn't appear in the Settings app list of available resolutions. I used "Mode 0" to via xrandr --newmode: ~$ xrandr --newmode "Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Then, xrandr --addmode: ~$ xrandr --addmode HDMI-1-1 "Mode 0" - Then in Settings app, I can select the 2560x1440 resolution for the ASUS - PG278QR display. + Then in Settings app, I can select the 2560x1440 resolution for the ASUS PG278QR display. + --- + ProblemType: Bug + .proc.driver.nvidia.capabilities.gpu0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/capabilities/gpu0' + .proc.driver.nvidia.capabilities.mig: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/capabilities/mig' + .proc.driver.nvidia.gpus.0000.02.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0000:02:00.0' + .proc.driver.nvidia.registry: Binary: "" + .proc.driver.nvidia.suspend: suspend hibernate resume + .proc.driver.nvidia.suspend_depth: default modeset uvm + .proc.driver.nvidia.version: + NVRM version: NVIDIA UNIX x86_64 Kernel Module 450.80.02 Wed Sep 23 01:13:39 UTC 2020 + GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04) + ApportVersion: 2.20.11-0ubuntu27.10 + Architecture: amd64 + BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' + CasperMD5CheckResult: skip + CompositorRunning: None + CurrentDesktop: ubuntu:GNOME + DistUpgraded: Fresh install + DistroCodename: focal + DistroRelease: Ubuntu 20.04 + DistroVariant: ubuntu + DkmsStatus: nvidia, 450.80.02, 5.4.0-52-generic, x86_64: installed + ExtraDebuggingInterest: Yes + GraphicsCard: + Intel Corporation UHD Graphics 620 (Whiskey Lake) [8086:3ea0] (prog-if 00 [VGA controller]) + Subsystem: Micro-Star International Co., Ltd. [MSI] UHD Graphics 620 (Whiskey Lake) [1462:126c] + Subsystem: Micro-Star International Co., Ltd. [MSI] GP107M [GeForce GTX 1050 Mobile] [1462:126c] + InstallationDate: Installed on 2019-04-11 (565 days ago) + InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) + MachineType: Micro-Star International Co., Ltd. PS63 Modern 8RC + NonfreeKernelModules: nvidia_modeset nvidia + Package: xorg-server (not installed) + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 + Tags: focal ubuntu + Uname: Linux 5.4.0-52-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: dialout plugdev sudo tty uucp + _MarkForUpload: True + dmi.bios.date: 12/24/2018 + dmi.bios.vendor: American Megatrends Inc. + dmi.bios.version: E16S1IMS.106 + dmi.board.asset.tag: Default string + dmi.board.name: MS-16S1 + dmi.board.vendor: Micro-Star International Co., Ltd. + dmi.board.version: REV:1.0 + dmi.chassis.asset.tag: No Asset Tag + dmi.chassis.type: 10 + dmi.chassis.vendor: Micro-Star International Co., Ltd. + dmi.chassis.version: N/A + dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE16S1IMS.106:bd12/24/2018:svnMicro-StarInternationalCo.,Ltd.:pnPS63Modern8RC:pvrREV1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMS-16S1:rvrREV1.0:cvnMicro-StarInternationalCo.,Ltd.:ct10:cvrN/A: + dmi.product.family: PS + dmi.product.name: PS63 Modern 8RC + dmi.product.sku: 16S1.1 + dmi.product.version: REV:1.0 + dmi.sys.vendor: Micro-Star International Co., Ltd. + version.compiz: compiz N/A + version.libdrm2: libdrm2 2.4.101-2 + version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.8-0ubuntu1~20.04.1 + version.libgl1-mesa-glx: libgl1-mesa-glx 20.0.8-0ubuntu1~20.04.1 + version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A + version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2.4 + version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A + version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 + version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 + version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Attachment added: ".proc.driver.nvidia.params.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427740/+files/.proc.driver.nvidia.params.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1901470/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
