I'm on 14.04 LTS and found this as a duplicate of Bug #1497266 reported
by Lin Yu Han on 2015-09-18. I'm wondering why the fix for this bug has
not been tested and made available in more than the zesty (experimental)
repository?  Alec had a fix 2 years ago:

Launchpad Janitor (janitor) wrote on 2016-11-01:        #4
This bug was fixed in the package lirc - 0.9.4c-4

14.04 is still at 0.9.0-0ubuntu5, which does not install.  Everyone on
the Long Term Support release with a need for lirc is vulnerable.  I
attempted 'apt-get install inputlirc' naked, but that brings lirc and
this failure too.

I've tried to avoid using lirc, but receive no (EV_KEY) key events in
'ir-keytable -t' output.

root@dor:/home/kirke/DOR# ir-keytable 
Found /sys/class/rc/rc0/ (/dev/input/event10) with:
        Driver mceusb, table rc-rc6-mce
        Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other 
        Enabled protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other 
        Name: Media Center Ed. eHome Infrared 
        bus: 3, vendor/product: 1784:0011, version: 0x0100
        Repeat delay = 500 ms, repeat period = 125 ms
root@dor:/home/kirke/DOR# ir-keytable -t
Testing events. Please, press CTRL-C to abort.
1551891292.693694: event type EV_MSC(0x04): scancode = 0x1f3f
1551891292.693694: event type EV_SYN(0x00).
1551891292.714638: event type EV_MSC(0x04): scancode = 0xb70076
1551891292.714638: event type EV_SYN(0x00).
1551891292.739634: event type EV_MSC(0x04): scancode = 0x1f3f
1551891292.739634: event type EV_SYN(0x00).
1551891292.759642: event type EV_MSC(0x04): scancode = 0xb70076
1551891292.759642: event type EV_SYN(0x00).
1551891292.784694: event type EV_MSC(0x04): scancode = 0x1f3f
1551891292.784694: event type EV_SYN(0x00).
1551891292.884699: event type EV_MSC(0x04): scancode = 0xb70076
1551891292.884699: event type EV_SYN(0x00).

Above is what I see after pressing the OK (Select) button.

I have the same remote and IR receiver working fine in the living room with 
lirc untouched under a 2014 install.  I want to transition both machines to 
18.04, but have no confidence I'll
have a working remote control for mythtv.

Apparently, I've removed and purged lirc in a way that is confusing
packaging software's post install script.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1203483

Title:
  package lirc 0.9.0-0ubuntu3 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 128

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/1203483/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to