Good uname -r 4.14.0-041400rc8-generic
dmesg | grep mmc [ 3.128542] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 3.150575] mmc1: SDHCI controller on ACPI [80860F14:03] using ADMA [ 3.359275] mmc0: new HS200 MMC card at address 0001 [ 3.363889] mmcblk0: mmc0:0001 BJNB4R 29.1 GiB [ 3.364098] mmcblk0boot0: mmc0:0001 BJNB4R partition 1 4.00 MiB [ 3.364254] mmcblk0boot1: mmc0:0001 BJNB4R partition 2 4.00 MiB [ 3.364471] mmcblk0rpmb: mmc0:0001 BJNB4R partition 3 4.00 MiB [ 3.367293] mmcblk0: p1 p2 p3 [ 5.912282] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.793061] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 7.641133] Adding 4085756k swap on /dev/mmcblk0p3. Priority:-2 extents:1 across:4085756k SSFS [ 51.509028] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 51.510484] mmcblk1: mmc1:59b4 00000 59.7 GiB [ 51.513027] mmcblk1: p1 [ 51.730325] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. ############################################################### Bad uname -r 4.15.0-041500rc1-generic dmesg | grep mmc [ 3.021412] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 3.048044] mmc1: SDHCI controller on ACPI [80860F14:03] using ADMA [ 3.294013] mmc0: new HS200 MMC card at address 0001 [ 3.299552] mmcblk0: mmc0:0001 BJNB4R 29.1 GiB [ 3.299725] mmcblk0boot0: mmc0:0001 BJNB4R partition 1 4.00 MiB [ 3.299961] mmcblk0boot1: mmc0:0001 BJNB4R partition 2 4.00 MiB [ 3.300235] mmcblk0rpmb: mmc0:0001 BJNB4R partition 3 4.00 MiB, chardev (242:0) [ 3.304538] mmcblk0: p1 p2 p3 [ 5.824844] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.601760] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 7.415364] Adding 4085756k swap on /dev/mmcblk0p3. Priority:-2 extents:1 across:4085756k SSFS [ 108.739176] mmc1: Tuning timeout, falling back to fixed sampling clock [ 108.739311] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 108.740897] mmcblk1: mmc1:59b4 00000 59.7 GiB [ 118.989952] mmc1: Timeout waiting for hardware interrupt. [ 118.989975] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 118.989990] mmc1: sdhci: Sys addr: 0x00000008 | Version: 0x00001002 [ 118.990003] mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008 [ 118.990015] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b [ 118.990028] mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017 [ 118.990040] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 118.990052] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 118.990064] mmc1: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000 [ 118.990077] mmc1: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 118.990090] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 118.990103] mmc1: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807 [ 118.990115] mmc1: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000 [ 118.990127] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x01dd7d7f [ 118.990139] mmc1: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00000000 [ 118.990150] mmc1: sdhci: Host ctl2: 0x0000800b [ 118.990162] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x3f801200 [ 118.990170] mmc1: sdhci: ============================================ [ 118.990790] mmcblk1: error -110 sending status command, retrying [ 118.991102] mmcblk1: error -110 sending status command, retrying [ 118.991405] mmcblk1: error -110 sending status command, aborting [ 119.557815] mmc1: Tuning timeout, falling back to fixed sampling clock [ 129.736008] mmc1: Timeout waiting for hardware interrupt. [ 129.736030] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 129.736046] mmc1: sdhci: Sys addr: 0x00000008 | Version: 0x00001002 [ 129.736059] mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008 [ 129.736071] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b [ 129.736084] mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017 [ 129.736097] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 129.736109] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 129.736121] mmc1: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000 [ 129.736133] mmc1: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 129.736146] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 129.736158] mmc1: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807 [ 129.736171] mmc1: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000 [ 129.736183] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x3010f32c [ 129.736196] mmc1: sdhci: Resp[2]: 0x30303030 | Resp[3]: 0x00000000 [ 129.736206] mmc1: sdhci: Host ctl2: 0x0000800b [ 129.736218] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x3f801200 [ 129.736227] mmc1: sdhci: ============================================ [ 129.736712] mmcblk1: error -110 sending status command, retrying [ 129.736916] mmcblk1: error -110 sending status command, retrying [ 129.737079] mmcblk1: error -110 sending status command, aborting [ 129.737107] print_req_error: I/O error, dev mmcblk1, sector 0 [ 129.737125] Buffer I/O error on dev mmcblk1, logical block 0, async page read [ 139.971302] mmc1: Timeout waiting for hardware interrupt. [ 139.971323] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 139.971339] mmc1: sdhci: Sys addr: 0x00000008 | Version: 0x00001002 [ 139.971351] mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008 [ 139.971364] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b [ 139.971377] mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017 [ 139.971389] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 139.971401] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 139.971413] mmc1: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000 [ 139.971426] mmc1: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 139.971438] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 139.971451] mmc1: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807 [ 139.971464] mmc1: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000 [ 139.971476] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x3010f32c [ 139.971489] mmc1: sdhci: Resp[2]: 0x30303030 | Resp[3]: 0x00000000 [ 139.971499] mmc1: sdhci: Host ctl2: 0x0000800b [ 139.971511] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x3f801200 [ 139.971520] mmc1: sdhci: ============================================ [ 139.971976] mmcblk1: error -110 sending status command, retrying [ 139.972138] mmcblk1: error -110 sending status command, retrying [ 139.972297] mmcblk1: error -110 sending status command, aborting [ 139.972325] print_req_error: I/O error, dev mmcblk1, sector 0 [ 139.972343] Buffer I/O error on dev mmcblk1, logical block 0, async page read [ 150.205856] mmc1: Timeout waiting for hardware interrupt. [ 150.205886] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 150.205898] mmc1: sdhci: Sys addr: 0x00000008 | Version: 0x00001002 [ 150.205908] mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008 [ 150.205918] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b [ 150.205935] mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017 [ 150.205941] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 150.205948] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 150.205954] mmc1: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000 [ 150.205961] mmc1: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 150.205967] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 150.205974] mmc1: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807 [ 150.205980] mmc1: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000 [ 150.205987] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x3010f32c [ 150.205994] mmc1: sdhci: Resp[2]: 0x30303030 | Resp[3]: 0x00000000 [ 150.206006] mmc1: sdhci: Host ctl2: 0x0000800b [ 150.206016] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x3f801200 [ 150.206023] mmc1: sdhci: ============================================ [ 150.207037] mmcblk1: error -110 sending status command, retrying [ 150.207177] mmcblk1: error -110 sending status command, retrying [ 150.207320] mmcblk1: error -110 sending status command, aborting [ 150.207338] print_req_error: I/O error, dev mmcblk1, sector 0 [ 150.207347] Buffer I/O error on dev mmcblk1, logical block 0, async page read [ 160.440939] mmc1: Timeout waiting for hardware interrupt. [ 160.440962] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 160.440977] mmc1: sdhci: Sys addr: 0x00000008 | Version: 0x00001002 [ 160.440990] mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008 [ 160.441002] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b [ 160.441015] mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017 [ 160.441027] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 160.441039] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 160.441051] mmc1: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000 [ 160.441064] mmc1: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 160.441076] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 160.441089] mmc1: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807 [ 160.441101] mmc1: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000 [ 160.441113] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x3010f32c [ 160.441126] mmc1: sdhci: Resp[2]: 0x30303030 | Resp[3]: 0x00000000 [ 160.441136] mmc1: sdhci: Host ctl2: 0x0000800b [ 160.441148] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x3f801200 [ 160.441157] mmc1: sdhci: ============================================ [ 160.441719] mmcblk1: error -110 sending status command, retrying [ 160.442437] mmcblk1: error -110 sending status command, retrying [ 160.442724] mmcblk1: error -110 sending status command, aborting [ 160.442758] print_req_error: I/O error, dev mmcblk1, sector 0 [ 160.442778] Buffer I/O error on dev mmcblk1, logical block 0, async page read [ 170.675908] mmc1: Timeout waiting for hardware interrupt. [ 170.675932] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 170.675948] mmc1: sdhci: Sys addr: 0x00000008 | Version: 0x00001002 [ 170.675960] mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008 [ 170.675973] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b [ 170.675986] mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017 [ 170.675998] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 170.676010] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 170.676022] mmc1: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000 [ 170.676035] mmc1: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 170.676047] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 170.676059] mmc1: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807 [ 170.676072] mmc1: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000 [ 170.676084] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x3010f32c [ 170.676096] mmc1: sdhci: Resp[2]: 0x30303030 | Resp[3]: 0x00000000 [ 170.676107] mmc1: sdhci: Host ctl2: 0x0000800b [ 170.676119] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x3f801200 [ 170.676127] mmc1: sdhci: ============================================ [ 170.676797] mmcblk1: error -110 sending status command, retrying [ 170.677213] mmcblk1: error -110 sending status command, retrying [ 170.677439] mmcblk1: error -110 sending status command, aborting [ 170.677471] print_req_error: I/O error, dev mmcblk1, sector 0 [ 170.677490] Buffer I/O error on dev mmcblk1, logical block 0, async page read -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808116 Title: 4.15 and higher kernels do not read the SD card To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808116/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
