Launchpad has imported 23 comments from the remote bug at https://bugzilla.redhat.com/show_bug.cgi?id=1242712.
If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. ------------------------------------------------------------------------ On 2015-07-14T03:03:36+00:00 Steven wrote: Description of problem: Unable to access SDCX cards via the SD Card reader in my T440s. No issues with any SDHC or micro SDHC cards via an adapter. Version-Release number of selected component (if applicable): Realtek PCI-E Card Reader Driver Current Kernel 4.0.7-200.fc21.x86_64 How reproducible: Fully Steps to Reproduce: 1. Insert an EXFAT / FAT / NTFS formatted SDXC Card 2. Card appears in Nautilus and under /run/media/user/XXXXX 3. Attempts to read/write to card result in errors or card corrpution Actual results: Numerous errors logged relating to the RTSX and MMC drivers. Jul 14 10:32:05 t440s kernel: rtsx_pci_sdmmc rtsx_pci_sdmmc.0: no support for card's volts Jul 14 10:32:05 t440s kernel: mmc0: error -22 whilst initialising SDIO card Jul 14 10:32:05 t440s kernel: mmc0: error -95 whilst initialising SD card Jul 14 10:32:05 t440s kernel: rtsx_pci_sdmmc rtsx_pci_sdmmc.0: no support for card's volts Jul 14 10:32:05 t440s kernel: mmc0: error -22 whilst initialising MMC card Jul 14 12:03:31 t440s kernel: mmc0: cannot verify signal voltage switch Jul 14 12:03:31 t440s kernel: mmc0: new ultra high speed SDR104 SDXC card at address 0007 Jul 14 12:03:31 t440s kernel: mmcblk0: mmc0:0007 SD64G 58.2 GiB Jul 14 12:03:31 t440s kernel: mmcblk0: p1 Jul 14 12:03:31 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jul 14 12:03:31 t440s kernel: mmc0: cannot verify signal voltage switch Jul 14 12:03:31 t440s kernel: mmc0: tried to reset card Jul 14 12:03:31 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jul 14 12:03:31 t440s kernel: mmc0: cannot verify signal voltage switch Jul 14 12:03:31 t440s kernel: mmc0: tried to reset card Jul 14 12:03:31 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jul 14 12:03:31 t440s kernel: blk_update_request: 2337 callbacks suppressed Jul 14 12:03:31 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2176 Jul 14 12:03:31 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2184 Expected results: R/W access should work cleanly with FAT/NTFS formatted cards R/W access should work for exFAT with the rpmfusion RPMS - fuse-exfat-1.1.0-1.fc21.x86_64 - exfat-utils-1.1.1-1.fc21.x86_64 Additional info: Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/21 ------------------------------------------------------------------------ On 2015-07-14T03:04:47+00:00 Steven wrote: Current Kernel Modules Version - kernel-modules-4.0.5-200.fc21.x86_64 Note that HW Certification for RHEL 7 is underway under https://bugzilla.redhat.com/show_bug.cgi?id=1220211 They should confirm that the device is fully operational with both SDHC and SDXC cards. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/22 ------------------------------------------------------------------------ On 2015-07-23T03:18:06+00:00 Steven wrote: Updated RHEL7 BZ 1220211 as the same issues occur Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/23 ------------------------------------------------------------------------ On 2015-07-23T03:19:56+00:00 Steven wrote: Tested the card under a friends T440s running Ubuntu 15.04 Insert vfat formatted card and create a new file. Then eject card. [ 1214.355115] mmc0: cannot verify signal voltage switch [ 1214.467278] mmc0: new ultra high speed SDR104 SDXC card at address 0007 [ 1214.474164] Driver 'mmcblk' needs updating - please use bus_type methods [ 1214.474277] mmcblk0: mmc0:0007 SD64G 58.2 GiB [ 1214.476144] mmcblk0: p1 [ 1224.953923] mmcblk0: timed out sending r/w cmd command, card status 0x400900 [ 1225.053874] mmcblk0: timed out sending r/w cmd command, card status 0x400900 [ 1231.207667] mmcblk0: timed out sending r/w cmd command, card status 0x400900 [ 1235.642101] mmcblk0: timed out sending r/w cmd command, card status 0x400900 [ 1240.232505] mmc0: card 0007 removed Getting the same r/w kernel errors when writing to the card. Ejected card is corrupted and needs re-formatting Confirms issue isn't specific to my T440s Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/24 ------------------------------------------------------------------------ On 2015-07-23T19:27:50+00:00 Laura wrote: I have the same hardware in my T540p lspci | grep -i RTS 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01 The card I have though seems to work on F22 4.0.7 [96429.177768] mmc0: cannot verify signal voltage switch [96429.284456] mmc0: new ultra high speed SDR50 SDXC card at address 59b4 [96429.284638] mmcblk0: mmc0:59b4 SL64G 59.4 GiB [96429.285748] mmcblk0: p1 This is admittedly a lower speed. Is it all SDXC cards that aren't working for you or just that specific one? Can you also confirm which kernel versions you are testing? I saw kernel 4.0.7 mentioned but modules 4.0.5. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/27 ------------------------------------------------------------------------ On 2015-08-12T00:46:53+00:00 Steven wrote: Based on the link below it does look like I've got a faster class of card http://panasonic.net/avc/sdcard/industrial_sd/performance.html Sadly this is the only SDXC card I currently have access to. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/28 ------------------------------------------------------------------------ On 2015-09-29T21:11:22+00:00 Martin wrote: I have the same issue with microSDHC Kinggston 16GB, Class 10 on TP 450s, F22: [81969.690224] mmc0: cannot verify signal voltage switch [81969.754721] mmc0: new ultra high speed SDR104 SDHC card at address 0001 [81969.754895] mmcblk0: mmc0:0001 SD16G 14.6 GiB (ro) [81969.756149] mmcblk0: p1 [81969.757462] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [81969.827288] mmc0: cannot verify signal voltage switch [81969.888252] mmc0: tried to reset card [81969.889490] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [81969.889495] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [81969.890135] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [81969.890138] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [81969.890140] Buffer I/O error on dev mmcblk0, logical block 3837936, async page read [81969.895589] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [81969.895598] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [81969.897084] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [81969.897090] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [81969.897094] Buffer I/O error on dev mmcblk0p1, logical block 3836912, async page read [root@dhcp-24-139 ~]# lspci | grep -i RTS 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01) Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/30 ------------------------------------------------------------------------ On 2015-10-29T07:47:14+00:00 Steven wrote: Retesting with a more recent kernel 4.1.8-100.fc21.x86_64 Oct 29 20:40:08 t440s kernel: mmc0: cannot verify signal voltage switch Oct 29 20:40:08 t440s kernel: mmc0: new ultra high speed SDR104 SDXC card at address 0007 Oct 29 20:40:08 t440s kernel: mmcblk0: mmc0:0007 SD64G 58.2 GiB Oct 29 20:40:08 t440s kernel: mmcblk0: p1 Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Oct 29 20:40:08 t440s kernel: mmc0: cannot verify signal voltage switch Oct 29 20:40:08 t440s kernel: mmc0: tried to reset card Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x800b00 Oct 29 20:40:08 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Oct 29 20:40:08 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Oct 29 20:40:08 t440s kernel: Buffer I/O error on dev mmcblk0, logical block 15267807, async page read Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Oct 29 20:40:08 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Oct 29 20:40:08 t440s kernel: Buffer I/O error on dev mmcblk0, logical block 15267807, async page read Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Oct 29 20:40:08 t440s kernel: mmc0: cannot verify signal voltage switch Oct 29 20:40:08 t440s kernel: mmc0: tried to reset card Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Oct 29 20:40:08 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2048 Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Oct 29 20:40:08 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2048 Oct 29 20:40:08 t440s kernel: Buffer I/O error on dev mmcblk0p1, logical block 0, async page read Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Oct 29 20:40:08 t440s kernel: mmc0: cannot verify signal voltage switch Oct 29 20:40:08 t440s kernel: mmc0: tried to reset card Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Oct 29 20:40:08 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2048 Oct 29 20:40:08 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Oct 29 20:40:08 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2048 Oct 29 20:40:08 t440s kernel: Buffer I/O error on dev mmcblk0p1, logical block 0, async page read same issues Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/31 ------------------------------------------------------------------------ On 2015-11-04T10:01:13+00:00 Fedora wrote: This message is a reminder that Fedora 21 is nearing its end of life. Approximately 4 (four) weeks from now Fedora will stop maintaining and issuing updates for Fedora 21. It is Fedora's policy to close all bug reports from releases that are no longer maintained. At that time this bug will be closed as EOL if it remains open with a Fedora 'version' of '21'. Package Maintainer: If you wish for this bug to remain open because you plan to fix it in a currently maintained version, simply change the 'version' to a later Fedora version. Thank you for reporting this issue and we are sorry that we were not able to fix it before Fedora 21 is end of life. If you would still like to see this bug fixed and are able to reproduce it against a later version of Fedora, you are encouraged change the 'version' to a later Fedora version prior this bug is closed as described in the policy above. Although we aim to fix as many bugs as possible during every release's lifetime, sometimes those efforts are overtaken by events. Often a more recent Fedora release includes newer upstream software that fixes bugs or makes them obsolete. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/32 ------------------------------------------------------------------------ On 2015-11-16T22:53:09+00:00 Steven wrote: Similar issues with an Apacer 32GB SDHC card which is also SDR104 rated. Single fat32 partition gets marked as corrupted and readonly. Need to use a USB3 based card reader to re-format or fsck the partition. Current kernel - 4.1.10-100.fc21.x86_64 Will attempt to repeat this test next week when I've upgraded to Fedora 23. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/33 ------------------------------------------------------------------------ On 2015-11-21T08:32:52+00:00 Steven wrote: Upgraded to Fedora 23 - Same issues with kernel 4.2.6-300.fc23.x86_64 Nov 21 21:29:16 t440s.akl kernel: mmc0: cannot verify signal voltage switch Nov 21 21:29:16 t440s.akl kernel: mmc0: new ultra high speed SDR104 SDXC card at address 0007 Nov 21 21:29:16 t440s.akl kernel: mmcblk0: mmc0:0007 SD64G 58.2 GiB Nov 21 21:29:16 t440s.akl kernel: mmcblk0: p1 Nov 21 21:29:16 t440s.akl kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Nov 21 21:29:16 t440s.akl kernel: mmc0: cannot verify signal voltage switch Nov 21 21:29:16 t440s.akl kernel: mmc0: tried to reset card Nov 21 21:29:16 t440s.akl kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Nov 21 21:29:16 t440s.akl kernel: mmc0: cannot verify signal voltage switch Nov 21 21:29:17 t440s.akl kernel: mmc0: tried to reset card Nov 21 21:29:17 t440s.akl kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Nov 21 21:29:17 t440s.akl kernel: mmc0: cannot verify signal voltage switch Nov 21 21:29:17 t440s.akl kernel: mmc0: tried to reset card Nov 21 21:29:17 t440s.akl kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: 133 callbacks suppressed Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142472 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142480 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142488 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142496 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142504 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142512 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142520 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142528 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142536 Nov 21 21:29:17 t440s.akl kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142544 Nov 21 21:29:17 t440s.akl kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/34 ------------------------------------------------------------------------ On 2016-09-23T19:44:02+00:00 Laura wrote: *********** MASS BUG UPDATE ************** We apologize for the inconvenience. There is a large number of bugs to go through and several of them have gone stale. Due to this, we are doing a mass bug update across all of the Fedora 23 kernel bugs. Fedora 23 has now been rebased to 4.7.4-100.fc23. Please test this kernel update (or newer) and let us know if you issue has been resolved or if it is still present with the newer kernel. If you have moved on to Fedora 24 or 25, and are still experiencing this issue, please change the version to Fedora 24 or 25. If you experience different issues, please open a new bug report for those. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/37 ------------------------------------------------------------------------ On 2016-09-27T22:41:59+00:00 Steven wrote: e-test with 4.7.4-100.fc23.x86_64 Sep 28 11:37:20 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:37:20 t440s kernel: mmc0: new ultra high speed SDR104 SDXC card at address 0007 Sep 28 11:37:20 t440s kernel: mmcblk0: mmc0:0007 SD64G 58.2 GiB Sep 28 11:37:20 t440s kernel: mmcblk0: p1 Sep 28 11:37:20 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:20 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:37:20 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:20 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Sep 28 11:37:20 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:20 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Sep 28 11:37:20 t440s kernel: Buffer I/O error on dev mmcblk0, logical block 15267807, async page read Sep 28 11:37:20 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:20 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Sep 28 11:37:20 t440s kernel: Buffer I/O error on dev mmcblk0, logical block 15267807, async page read Sep 28 11:37:20 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:20 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:37:20 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:20 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2048 Sep 28 11:37:20 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:20 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2048 Sep 28 11:37:20 t440s kernel: Buffer I/O error on dev mmcblk0p1, logical block 0, async page read Sep 28 11:37:20 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:20 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:37:20 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:21 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:37:21 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:21 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:37:21 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:21 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:37:21 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:21 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2168 Sep 28 11:37:21 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:37:21 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2168 Sep 28 11:37:21 t440s kernel: Buffer I/O error on dev mmcblk0p1, logical block 15, async page read Check if we have a valid partition table [root@t440s sellis]# fdisk -l /dev/mmcblk0 Disk /dev/mmcblk0: 58.2 GiB, 62537072640 bytes, 122142720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x589b34b4 Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 2048 122140671 122138624 58.2G 83 Linux [root@t440s sellis]# blkid /dev/mmcblk0p1 /dev/mmcblk0p1: LABEL="SDXH64" UUID="6191b643-9335-430f-a59d-fed009df3b61" TYPE="xfs" PARTUUID="589b34b4-01" This produced the following kernel errors Sep 28 11:38:08 t440s chronyd[1148]: Selected source 203.97.109.165 Sep 28 11:38:16 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:16 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:16 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 122140408 Sep 28 11:38:16 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:16 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:16 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2176 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2184 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2192 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2200 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2208 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2216 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2224 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2232 Sep 28 11:38:16 t440s kernel: blk_update_request: I/O error, dev mmcblk0, sector 2240 Sep 28 11:38:16 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:16 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:16 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:17 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:17 t440s kernel: Buffer I/O error on dev mmcblk0p1, logical block 9, async page read Sep 28 11:38:17 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:17 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:17 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:17 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:17 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:17 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:17 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:17 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:17 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:17 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:17 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:18 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:18 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:18 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:18 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:18 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:18 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:18 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:18 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:18 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:18 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:19 t440s kernel: mmc0: cannot verify signal voltage switch Sep 28 11:38:19 t440s kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Sep 28 11:38:19 t440s kernel: Buffer I/O error on dev mmcblk0p1, logical block 117, async page read Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/38 ------------------------------------------------------------------------ On 2016-09-30T06:29:39+00:00 Martin wrote: With 4.7.4-200.fc24.x86_64: [21018.804406] mmc0: cannot verify signal voltage switch [21018.875153] mmc0: new ultra high speed SDR104 SDHC card at address 0001 [21018.884054] mmcblk0: mmc0:0001 SD16G 14.6 GiB (ro) [21018.885885] mmcblk0: p1 [21018.887897] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [21018.968467] mmc0: cannot verify signal voltage switch [21019.036179] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [21019.036184] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [21019.036797] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [21019.036803] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [21019.036806] Buffer I/O error on dev mmcblk0, logical block 3837936, async page read [21019.042829] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [21019.042836] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [21019.043411] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [21019.043416] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [21019.043419] Buffer I/O error on dev mmcblk0p1, logical block 3836912, async page read The card work fine in both camera and the external card reader. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/39 ------------------------------------------------------------------------ On 2016-11-24T12:11:58+00:00 Fedora wrote: This message is a reminder that Fedora 23 is nearing its end of life. Approximately 4 (four) weeks from now Fedora will stop maintaining and issuing updates for Fedora 23. It is Fedora's policy to close all bug reports from releases that are no longer maintained. At that time this bug will be closed as EOL if it remains open with a Fedora 'version' of '23'. Package Maintainer: If you wish for this bug to remain open because you plan to fix it in a currently maintained version, simply change the 'version' to a later Fedora version. Thank you for reporting this issue and we are sorry that we were not able to fix it before Fedora 23 is end of life. If you would still like to see this bug fixed and are able to reproduce it against a later version of Fedora, you are encouraged change the 'version' to a later Fedora version prior this bug is closed as described in the policy above. Although we aim to fix as many bugs as possible during every release's lifetime, sometimes those efforts are overtaken by events. Often a more recent Fedora release includes newer upstream software that fixes bugs or makes them obsolete. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/40 ------------------------------------------------------------------------ On 2016-12-19T11:19:31+00:00 Martin wrote: Fedora 25 kernel: 4.8.13-300.fc25.x86_64 [122441.643012] mmc0: cannot verify signal voltage switch [122441.715211] mmc0: new ultra high speed SDR104 SDHC card at address 0001 [122441.720751] mmcblk0: mmc0:0001 SD16G 14.6 GiB [122441.722562] mmcblk0: p1 [122441.724782] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [122441.816900] mmc0: cannot verify signal voltage switch [122441.887294] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [122441.887299] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [122441.887866] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [122441.887869] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [122441.887871] Buffer I/O error on dev mmcblk0, logical block 3837936, async page read [122441.891055] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [122441.891060] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [122441.892012] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [122441.892017] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [122441.892020] Buffer I/O error on dev mmcblk0p1, logical block 3836912, async page read Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/41 ------------------------------------------------------------------------ On 2017-01-03T02:53:08+00:00 Steven wrote: Confirmed issue - Fedora 25 - 4.8.11-300.fc25.x86_64 Jan 03 15:50:50 t440s. kernel: mmc0: cannot verify signal voltage switch Jan 03 15:50:50 t440s. kernel: mmc0: new ultra high speed SDR104 SDXC card at address 0007 Jan 03 15:50:50 t440s. kernel: mmcblk0: mmc0:0007 SD64G 58.2 GiB Jan 03 15:50:50 t440s. kernel: mmcblk0: p1 Jan 03 15:50:50 t440s. kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jan 03 15:50:50 t440s. kernel: mmc0: cannot verify signal voltage switch Jan 03 15:50:50 t440s. kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jan 03 15:50:50 t440s. kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Jan 03 15:50:50 t440s. kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jan 03 15:50:50 t440s. kernel: mmc0: cannot verify signal voltage switch Jan 03 15:50:50 t440s. kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jan 03 15:50:50 t440s. kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142320 Jan 03 15:50:50 t440s. kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jan 03 15:50:50 t440s. kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142320 Jan 03 15:50:50 t440s. kernel: Buffer I/O error on dev mmcblk0, logical block 15267790, async page read Jan 03 15:50:50 t440s. baloo_file.desktop[18594]: QObject::connect: invalid null parameter Jan 03 15:50:50 t440s. kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jan 03 15:50:50 t440s. baloo_file.desktop[18594]: QObject::connect: invalid null parameter Jan 03 15:50:50 t440s. kernel: mmc0: cannot verify signal voltage switch Jan 03 15:50:51 t440s. kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jan 03 15:50:51 t440s. kernel: blk_update_request: I/O error, dev mmcblk0, sector 122140408 Jan 03 15:50:51 t440s. kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Jan 03 15:50:51 t440s. kernel: blk_update_request: I/O error, dev mmcblk0, sector 122140408 Jan 03 15:50:51 t440s. kernel: Buffer I/O error on dev mmcblk0p1, logical block 15267295, async page read Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/42 ------------------------------------------------------------------------ On 2017-01-17T01:20:12+00:00 Laura wrote: *********** MASS BUG UPDATE ************** We apologize for the inconvenience. There is a large number of bugs to go through and several of them have gone stale. Due to this, we are doing a mass bug update across all of the Fedora 25 kernel bugs. Fedora 25 has now been rebased to 4.9.3-200.fc25. Please test this kernel update (or newer) and let us know if you issue has been resolved or if it is still present with the newer kernel. If you have moved on to Fedora 26, and are still experiencing this issue, please change the version to Fedora 26. If you experience different issues, please open a new bug report for those. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/43 ------------------------------------------------------------------------ On 2017-01-30T09:30:00+00:00 Martin wrote: With 4.9.3-200.fc25.x86_64 in getting another error msgs in dmesg: [239094.647231] mmc0: problem reading SD Status register [239095.063242] mmc0: error -110 whilst initialising SD card [239096.087211] mmc0: problem reading SD Status register [239096.503267] mmc0: error -110 whilst initialising SD card [239097.527291] mmc0: problem reading SD Status register [239097.943232] mmc0: error -110 whilst initialising SD card but still no access to the card at all. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/44 ------------------------------------------------------------------------ On 2017-02-12T22:12:51+00:00 Steven wrote: I'm still seeing errors in the kernel logs Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmc0: cannot verify signal voltage switch Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmc0: new ultra high speed SDR104 SDXC card at address 0007 Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: mmc0:0007 SD64G 58.2 GiB Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: p1 Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmc0: cannot verify signal voltage switch Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:23 t440s.akl.redhat.com kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:23 t440s.akl.redhat.com kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Feb 13 11:04:23 t440s.akl.redhat.com kernel: Buffer I/O error on dev mmcblk0, logical block 15267807, async page read Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:23 t440s.akl.redhat.com kernel: blk_update_request: I/O error, dev mmcblk0, sector 122142456 Feb 13 11:04:23 t440s.akl.redhat.com kernel: Buffer I/O error on dev mmcblk0, logical block 15267807, async page read Feb 13 11:04:23 t440s.akl.redhat.com baloo_file.desktop[3012]: QObject::connect: invalid null parameter Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:23 t440s.akl.redhat.com baloo_file.desktop[3012]: QObject::connect: invalid null parameter Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmc0: cannot verify signal voltage switch Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:23 t440s.akl.redhat.com kernel: blk_update_request: I/O error, dev mmcblk0, sector 2048 Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:23 t440s.akl.redhat.com kernel: blk_update_request: I/O error, dev mmcblk0, sector 2048 Feb 13 11:04:23 t440s.akl.redhat.com kernel: Buffer I/O error on dev mmcblk0p1, logical block 0, async page read Feb 13 11:04:23 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:24 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:24 t440s.akl.redhat.com kernel: blk_update_request: I/O error, dev mmcblk0, sector 122140408 Feb 13 11:04:24 t440s.akl.redhat.com kernel: mmcblk0: unknown error -22 sending read/write command, card status 0x900 Feb 13 11:04:24 t440s.akl.redhat.com kernel: blk_update_request: I/O error, dev mmcblk0, sector 122140408 Feb 13 11:04:24 t440s.akl.redhat.com kernel: Buffer I/O error on dev mmcblk0p1, logical block 15267295, async page read Can't detect a valid filesystem on partition 1 when using the SD Card slot. Re-tested card in a USB-3 SD Card reader and the xfs partition is still present and working correctly. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/45 ------------------------------------------------------------------------ On 2017-04-11T14:50:09+00:00 Justin wrote: *********** MASS BUG UPDATE ************** We apologize for the inconvenience. There is a large number of bugs to go through and several of them have gone stale. Due to this, we are doing a mass bug update across all of the Fedora 25 kernel bugs. Fedora 25 has now been rebased to 4.10.9-200.fc25. Please test this kernel update (or newer) and let us know if you issue has been resolved or if it is still present with the newer kernel. If you have moved on to Fedora 26, and are still experiencing this issue, please change the version to Fedora 26. If you experience different issues, please open a new bug report for those. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/46 ------------------------------------------------------------------------ On 2017-04-28T17:08:32+00:00 Justin wrote: *********** MASS BUG UPDATE ************** This bug is being closed with INSUFFICIENT_DATA as there has not been a response in 2 weeks. If you are still experiencing this issue, please reopen and attach the relevant data from the latest kernel you are running and any data that might have been requested previously. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/47 ------------------------------------------------------------------------ On 2017-05-03T06:55:32+00:00 Martin wrote: I still experience the bug on 4.10.11-200.fc25. Reopening. $ dmesg .... [400907.114086] mmc0: cannot verify signal voltage switch [400907.187122] mmc0: new ultra high speed SDR104 SDHC card at address 0001 [400907.200888] mmcblk0: mmc0:0001 SD16G 14.6 GiB [400907.202803] mmcblk0: p1 [400907.205391] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [400907.284931] mmc0: cannot verify signal voltage switch [400907.354893] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [400907.354904] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [400907.355516] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [400907.355525] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [400907.355530] Buffer I/O error on dev mmcblk0, logical block 3837936, async page read [400907.376586] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [400907.457877] mmc0: cannot verify signal voltage switch [400907.528358] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [400907.528366] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [400907.529173] mmcblk0: unknown error -22 sending read/write command, card status 0x900 [400907.529181] blk_update_request: I/O error, dev mmcblk0, sector 30703488 [400907.529186] Buffer I/O error on dev mmcblk0p1, logical block 3836912, async page read $ uname -a Linux dhcp-24-139.brq.redhat.com 4.10.11-200.fc25.x86_64 #1 SMP Tue Apr 18 17:25:01 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux $ Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153618/comments/48 ** Changed in: linux (Fedora) Status: Unknown => Confirmed ** Changed in: linux (Fedora) Importance: Unknown => Medium ** Bug watch added: Red Hat Bugzilla #1220211 https://bugzilla.redhat.com/show_bug.cgi?id=1220211 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1153618 Title: Support Realtek RTS5227 card reader To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1153618/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
