Public bug reported: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
affects /ubuntu/libzip importance high # version 0.8-0ubuntu1 Test executed for: gutsy source libzip Outcome: erroneous package! blame: arg:tmp/libzip/src/libzip_0.8-0ubuntu1.dsc dsc:libzip badpkg: rules build failed with exit code 2 quitting: erroneous package: rules build failed with exit code 2 erroneous package! This message is automatically generated by the autopkgtest package testing system. You are receiving it because: The test results appear to indicate a problem with the package and reports for package maintainers for gutsy are being directed to [EMAIL PROTECTED] The top and tail of the test log, which is intended to be sufficient to diagnose most failures, can be found below. However, in case this is not sufficient, a complete log can be found along with output files, saved temporary files, and so on, at: http://autopkgtest.ubuntu.com/autopkgtest-output/ The test environment is an amd64 Xen guest with limited amounts of memory. The relevant dependencies are installed for each test but very few other packages. Most autopkgtest reports are FTBFS problems. Please forgive this bug report if the problem is due to archive skew; in that case you've just been unlucky with the timing. Feel free to close the bug if the skew has been fixed, or will be fixed soon. If you have any questions about this service please contact me at: Ian Jackson <[EMAIL PROTECTED]> Regards, Ian - -8<- ++++++ fetching http://archive.ubuntu.com/ubuntu/dists/gutsy/main/source/Sources.gz ++++++ ++++++ selecting ++++++ selected libzip (age <never-yet>, score 500000000) Package: libzip Binary: libzip-dev, libzip1 Version: 0.8-0ubuntu1 Section: libs Maintainer: Ubuntu MOTU Developers <[EMAIL PROTECTED]> Original-Maintainer: Jonathan Riddell <[EMAIL PROTECTED]> Build-Depends: debhelper (>= 5.0.37.2), cdbs Architecture: any Standards-Version: 3.7.2 Format: 1.0 Directory: pool/main/libz/libzip Files: 769f04a0ac41e2b2b6ba4d43f5499fbd 687 libzip_0.8-0ubuntu1.dsc b0087c2a12b312f8ec2df1052b2acb4f 414095 libzip_0.8.orig.tar.gz 57dcb54389b1e6330119df558e50862f 1743 libzip_0.8-0ubuntu1.diff.gz Python-Version: all ++++++ fetching http://archive.ubuntu.com/ubuntu/pool/main/libz/libzip/libzip_0.8-0ubuntu1.dsc ++++++ ++++++ fetching http://archive.ubuntu.com/ubuntu/pool/main/libz/libzip/libzip_0.8.orig.tar.gz ++++++ ++++++ fetching http://archive.ubuntu.com/ubuntu/pool/main/libz/libzip/libzip_0.8-0ubuntu1.diff.gz ++++++ ++++++ starting test ++++++ + adt-run --tmp-dir tmp/libzip/tmp --output-dir tmp/libzip/out --log-file tmp/libzip/log --summary tmp/_summary --built-binaries-filter=__ --source tmp/libzip/src/libzip_0.8-0ubuntu1.dsc --- adt-virt-xenlvm --userv --distro=gutsy -- adt-run: trace: ** init adt-run: trace: ** start adt-run: trace: $ vserver: adt-virt-xenlvm --userv --distro=gutsy -- File descriptor 6 left open File descriptor 7 left open adt-run: trace: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ starting adt-run: trace: ** open, scratch=None File descriptor 6 left open File descriptor 11 left open File descriptor 6 left open File descriptor 11 left open adt-run: trace: * initialising adt-run: trace: * no key generation needed adt-run: trace: * reset adt-run: trace: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ builds ... adt-run: trace: @@@@@@@@@@@@@@@@@@@@ dsc dsc0 adt-run: trace: * publish adt-run: trace: $ ftparchive: sh -ec <SCRIPT> x tmp/libzip/tmp/binaries /home/iwj/.autopkgtest/gpg adt-run: trace: $ apt-key: sh -ec <SCRIPT> OK Get:1 file: Release.gpg [189B] Get:2 http://archive.ubuntu.com gutsy Release.gpg [191B] Get:3 file: Release [724B] Get:4 http://archive.ubuntu.com gutsy Release [65.9kB] Ign file: Packages Get:5 http://archive.ubuntu.com gutsy/main Packages [1073kB] Get:6 http://archive.ubuntu.com gutsy/restricted Packages [7150B] Get:7 http://archive.ubuntu.com gutsy/universe Packages [3998kB] Get:8 http://archive.ubuntu.com gutsy/multiverse Packages [152kB] Fetched 5297kB in 3s (1723kB/s) Reading package lists... adt-run: trace: * publish reinstall checking... adt-run: trace: * publish install... adt-run: trace: * publish done adt-run: trace: $ dsc0: python -c <SCRIPT> adt-run: trace: $ dsc0-extract: sh -ec <SCRIPT> x /root/adt-downtmp/dsc0-build/tmpdir /root/adt-downtmp/dsc0/libzip_0.8-0ubuntu1.dsc + spec=/root/adt-downtmp/dsc0/libzip_0.8-0ubuntu1.dsc + pwd + origpwd=/root/adt-downtmp/dsc0-build + cd /root/adt-downtmp/dsc0-build + chown adtxenu . + TMPDIR=/root/adt-downtmp/dsc0-build/tmpdir + rm -rf -- /root/adt-downtmp/dsc0-build/tmpdir + export TMPDIR + su adtxenu -c mkdir -- "$TMPDIR" + spec=/root/adt-downtmp/dsc0/libzip_0.8-0ubuntu1.dsc origpwd=/root/adt-downtmp/dsc0-build su adtxenu -c \t\t\tdpkg-source -x $spec \t\t\t gpg: new configuration file `/home/adtxenu/.gnupg/gpg.conf' created gpg: WARNING: options in `/home/adtxenu/.gnupg/gpg.conf' are not yet active during this run gpg: Signature made Fri Oct 12 19:42:11 2007 UTC using DSA key ID DD4D5088 gpg: Can't check signature: public key not found dpkg-source: extracting libzip in libzip-0.8 dpkg-source: unpacking libzip_0.8.orig.tar.gz dpkg-source: applying /root/adt-downtmp/dsc0/libzip_0.8-0ubuntu1.diff.gz + cd libzip-0.8/. + pwd + set +e + test -f debian/tests/control + echo 1 adt-run: trace: * <dsc:dsc0> build needed for binaries adt-run: trace: $ dsc0: python -c <SCRIPT> adt-run: trace: $ dsc0-build: sh -ec <SCRIPT> x /root/adt-downtmp/dsc0-build/tmpdir /root/adt-downtmp/dsc0-build/libzip-0.8 + TMPDIR=/root/adt-downtmp/dsc0-build/tmpdir + rm -rf -- /root/adt-downtmp/dsc0-build/tmpdir + export TMPDIR + su adtxenu -c mkdir -- "$TMPDIR" + cd /root/adt-downtmp/dsc0-build/libzip-0.8 + dpkg-checkbuilddeps + su adtxenu -c debian/rules build test -x debian/rules mkdir -p "." /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/root/adt-downtmp/dsc0-build/libzip-0.8' for i in ./config.guess ./config.sub ; do \\ \t\tif test -e $i.cdbs-orig ; then \\ \t\t\tmv $i.cdbs-orig $i ; \\ \t\tfi ; \\ \tdone make[1]: Leaving directory `/root/adt-downtmp/dsc0-build/libzip-0.8' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \\ \t\t/usr/bin/make -f debian/rules update-config ; \\ \tfi make[1]: Entering directory `/root/adt-downtmp/dsc0-build/libzip-0.8' if test -e /usr/share/misc/config.guess ; then \\ \t\tfor i in ./config.guess ; do \\ \t\t\tif ! test -e $i.cdbs-orig ; then \\ \t\t\t\tmv $i $i.cdbs-orig ; \\ \t\t\t\tcp --remove-destination /usr/share/misc/config.guess $i ; \\ \t\t\tfi ; \\ \t\tdone ; \\ \tfi if test -e /usr/share/misc/config.sub ; then \\ \t\tfor i in ./config.sub ; do \\ \t\t\tif ! test -e $i.cdbs-orig ; then \\ \t\t\t\tmv $i $i.cdbs-orig ; \\ \t\t\t\tcp --remove-destination /usr/share/misc/config.sub $i ; \\ \t\t\tfi ; \\ \t\tdone ; \\ \tfi make[1]: Leaving directory `/root/adt-downtmp/dsc0-build/libzip-0.8' if test -e /usr/share/misc/config.guess ; then \\ \t\tfor i in ./config.guess ; do \\ \t\t\tif ! test -e $i.cdbs-orig ; then \\ \t\t\t\tmv $i $i.cdbs-orig ; \\ \t\t\t\tcp --remove-destination /usr/share/misc/config.guess $i ; \\ \t\t\tfi ; \\ \t\tdone ; \\ \tfi if test -e /usr/share/misc/config.sub ; then \\ \t\tfor i in ./config.sub ; do \\ \t\t\tif ! test -e $i.cdbs-orig ; then \\ \t\t\t\tmv $i $i.cdbs-orig ; \\ \t\t\t\tcp --remove-destination /usr/share/misc/config.sub $i ; \\ \t\t\tfi ; \\ \t\tdone ; \\ \tfi touch debian/stamp-autotools-files chmod a+x /root/adt-downtmp/dsc0-build/libzip-0.8/./configure cd . && CC="cc" CXX="g++" CFLAGS="-g -Wall -O2" CXXFLAGS="-g -Wall -O2" CPPFLAGS="" LDFLAGS="" /root/adt-downtmp/dsc0-build/libzip-0.8/./configure --build=x86_64-linux-gnu --prefix=/usr --includedir="\\${prefix}/include" --mandir="\\${prefix}/share/man" --infodir="\\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\\${prefix}/lib/libzip" --disable-maintainer-mode --disable-dependency-tracking --srcdir=. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... none checking whether cc understands -c and -o together... yes checking for main in -lz... no checking new ZLIB version... no configure: error: ZLIB version too old, please install at least v1.1.2 make: *** [config.status] Error 1 blame: arg:tmp/libzip/src/libzip_0.8-0ubuntu1.dsc dsc:libzip badpkg: rules build failed with exit code 2 adt-run: erroneous package: rules build failed with exit code 2 adt-run: trace: ** stop adt-run: trace: ** close, scratch=tb-scratch~/root/adt-downtmp:-/|/root/adt-downtmp/! ++++++ RESULTS erroneous package! ++++++ ++++++ bundling ++++++ ++++++ uploading ++++++ ++++++ contacting maintainer_email_override ++++++ ++++++ tested. ++++++ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) iD8DBQFHD+zk4qsES9Ynl2gRAoJBAJ9y54UHkdWEVDOQo1tYPs2SA8ptjACgpvm8 2CMcyfGyIFEfuA2Ec95KwDc= =xrF5 -----END PGP SIGNATURE----- ** Affects: libzip (Ubuntu) Importance: High Status: New -- autopkgtest gutsy libzip: erroneous package! https://bugs.launchpad.net/bugs/152128 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
