No. It doesn't. That seems to be the dmesg output: [ 835.520675] ath9k: ath9k: Driver unloaded [ 846.445669] ath: phy2: WB335 2-ANT card detected [ 846.445672] ath: phy2: Set BT/WLAN RX diversity capability [ 846.452455] ath: phy2: Enable LNA combining [ 846.454453] ath: phy2: ASPM enabled: 0x42 [ 846.454455] ath: EEPROM regdomain: 0x65 [ 846.454456] ath: EEPROM indicates we should expect a direct regpair map [ 846.454458] ath: Country alpha2 being used: 00 [ 846.454459] ath: Regpair used: 0x65 [ 846.455107] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 846.456730] ieee80211 phy2: Atheros AR9565 Rev:1 mem=0xffffc90001d00000, irq=19 [ 846.462084] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 846.490495] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 846.507058] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 846.562627] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 847.429922] wlp3s0: authenticate with d4:ca:6d:13:2a:50 [ 847.443348] wlp3s0: send auth to d4:ca:6d:13:2a:50 (try 1/3) [ 847.464617] wlp3s0: authenticated [ 847.468546] wlp3s0: associate with d4:ca:6d:13:2a:50 (try 1/3) [ 847.484969] wlp3s0: RX AssocResp from d4:ca:6d:13:2a:50 (capab=0x421 status=0 aid=3) [ 847.485060] wlp3s0: associated [ 847.485071] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ ] "Then several UFW entries appear."
Att. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1618219 Title: Bluetooth driver module doesn't work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1618219/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
