Public bug reported:
Just installed Gusty and found out that keys Ctrl+Alt+F1 through F6 no
longer work. They used to work in Feisty. Below I included uname and
dmesg info:
uname
Linux Bee 2.6.22-12-generic #1 SMP Sun Sep 23 18:11:30 GMT 2007 i686 GNU/Linux
dmesg
[ 0.000000] Linux version 2.6.22-12-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23
18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524192) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524192
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524192
[ 0.000000] On node 0 totalpages: 524192
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292513 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FAE40, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFA0000, 0034 (r1 A M I OEMRSDT 9000605 MSFT
97)
[ 0.000000] ACPI: FACP 7FFA0200, 0084 (r2 A M I OEMFACP 9000605 MSFT
97)
[ 0.000000] ACPI: DSDT 7FFA0440, 888C (r1 A0483 A0483035 35 INTL
20060113)
[ 0.000000] ACPI: FACS 7FFAE000, 0040
[ 0.000000] ACPI: APIC 7FFA0390, 006C (r1 A M I OEMAPIC 9000605 MSFT
97)
[ 0.000000] ACPI: MCFG 7FFA0400, 003C (r1 A M I OEMMCFG 9000605 MSFT
97)
[ 0.000000] ACPI: OEMB 7FFAE040, 007B (r1 A M I AMI_OEM 9000605 MSFT
97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:7ee00000)
[ 0.000000] Built 1 zonelists. Total pages: 520097
[ 0.000000] Kernel command line:
root=UUID=3e30ae76-b85e-45a3-aebc-44076dcdbc15 ro quiet splash vga=0x303
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 3410.941 MHz processor.
[ 14.610888] Console: colour dummy device 80x25
[ 14.611129] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 14.611412] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.695331] Memory: 2067336k/2096768k available (2017k kernel code, 28224k
reserved, 918k data, 364k init, 1179264k highmem)
[ 14.695340] virtual kernel memory layout:
[ 14.695341] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 14.695342] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.695343] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 14.695344] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 14.695345] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 14.695346] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB)
[ 14.695347] .text : 0xc0100000 - 0xc02f8456 (2017 kB)
[ 14.695350] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 14.695384] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 14.775346] Calibrating delay using timer specific routine.. 6827.34
BogoMIPS (lpj=13654685)
[ 14.775369] Security Framework v1.0.0 initialized
[ 14.775373] SELinux: Disabled at boot.
[ 14.775384] Mount-cache hash table entries: 512
[ 14.775494] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e59d 00000000 00000001
[ 14.775502] monitor/mwait feature present.
[ 14.775504] using mwait in idle threads.
[ 14.775510] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 14.775512] CPU: L2 cache: 2048K
[ 14.775514] CPU: Physical Processor ID: 0
[ 14.775516] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180
0000e59d 00000000 00000001
[ 14.775526] Compat vDSO mapped to ffffe000.
[ 14.775539] Checking 'hlt' instruction... OK.
[ 14.791433] SMP alternatives: switching to UP code
[ 14.791806] Early unpacking initramfs... done
[ 15.044636] ACPI: Core revision 20070126
[ 15.044708] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 15.087586] CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 05
[ 15.087604] SMP alternatives: switching to SMP code
[ 15.087678] Booting processor 1/1 eip 3000
[ 15.097987] Initializing CPU#1
[ 15.175049] Calibrating delay using timer specific routine.. 6821.74
BogoMIPS (lpj=13643480)
[ 15.175059] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e59d 00000000 00000001
[ 15.175065] monitor/mwait feature present.
[ 15.175071] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 15.175074] CPU: L2 cache: 2048K
[ 15.175076] CPU: Physical Processor ID: 0
[ 15.175078] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180
0000e59d 00000000 00000001
[ 15.175590] CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 05
[ 15.175627] Total of 2 processors activated (13649.08 BogoMIPS).
[ 15.175772] ENABLING IO-APIC IRQs
[ 15.175949] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.323041] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 15.343040] Brought up 2 CPUs
[ 15.394751] migration_cost=7
[ 15.394908] Booting paravirtualized kernel on bare hardware
[ 15.394969] Time: 22:43:24 Date: 08/29/107
[ 15.394991] NET: Registered protocol family 16
[ 15.395076] EISA bus registered
[ 15.395081] ACPI: bus type pci registered
[ 15.395170] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 15.395172] PCI: Using configuration type 1
[ 15.395174] Setting up standard PCI resources
[ 15.408630] ACPI: EC: Look up EC in DSDT
[ 15.414435] ACPI: Interpreter enabled
[ 15.414439] ACPI: (supports S0 S1 S3 S4 S5)
[ 15.414459] ACPI: Using IOAPIC for interrupt routing
[ 15.423326] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.423340] PCI: Probing PCI hardware (bus 00)
[ 15.423983] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 15.423987] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 15.424885] PCI: Transparent bridge - 0000:00:1e.0
[ 15.424950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.425121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 15.425206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 15.425338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 15.425426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 15.425515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 15.439755] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 15.439877] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 15.439996] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 15.440116] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 15.440240] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 15.440361] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 15.440480] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 15.440600] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 15.440710] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.440720] pnp: PnP ACPI init
[ 15.440729] ACPI: bus type pnp registered
[ 15.443642] pnp: PnP ACPI: found 14 devices
[ 15.443645] ACPI: ACPI bus type pnp unregistered
[ 15.443649] PnPBIOS: Disabled by ACPI PNP
[ 15.443698] PCI: Using ACPI for IRQ routing
[ 15.443701] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 15.456014] NET: Registered protocol family 8
[ 15.456016] NET: Registered protocol family 20
[ 15.456069] pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 15.456078] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[ 15.456083] pnp: 00:09: iomem range 0xffafe000-0xffb0cbff could not be
reserved
[ 15.456086] pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be
reserved
[ 15.456089] pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 15.456092] pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 15.456096] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 15.456099] pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 15.456105] pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 15.456110] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 15.456113] pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 15.456115] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 15.456118] pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 15.458871] Time: tsc clocksource has been installed.
[ 15.486444] PCI: Bridge: 0000:00:01.0
[ 15.486448] IO window: 7000-9fff
[ 15.486452] MEM window: ff600000-ff6fffff
[ 15.486455] PREFETCH window: bfe00000-dfdfffff
[ 15.486459] PCI: Bridge: 0000:00:1c.0
[ 15.486460] IO window: disabled.
[ 15.486465] MEM window: disabled.
[ 15.486469] PREFETCH window: dfe00000-dfefffff
[ 15.486473] PCI: Bridge: 0000:00:1c.4
[ 15.486476] IO window: b000-bfff
[ 15.486481] MEM window: ff800000-ff8fffff
[ 15.486484] PREFETCH window: disabled.
[ 15.486489] PCI: Bridge: 0000:00:1c.5
[ 15.486492] IO window: a000-afff
[ 15.486496] MEM window: ff700000-ff7fffff
[ 15.486500] PREFETCH window: disabled.
[ 15.486504] PCI: Bridge: 0000:00:1e.0
[ 15.486506] IO window: disabled.
[ 15.486510] MEM window: ff900000-ff9fffff
[ 15.486514] PREFETCH window: disabled.
[ 15.486529] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 15.486534] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.486550] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 15.486556] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.486572] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) ->
IRQ 16
[ 15.486577] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 15.486594] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) ->
IRQ 17
[ 15.486599] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 15.486609] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.486619] NET: Registered protocol family 2
[ 15.522946] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.523012] TCP established hash table entries: 131072 (order: 8, 1572864
bytes)
[ 15.523770] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.524023] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.524025] TCP reno registered
[ 15.535084] checking if image is initramfs... it is
[ 15.986513] Switched to high resolution mode on CPU 0
[ 15.986588] Switched to high resolution mode on CPU 1
[ 16.033071] Freeing initrd memory: 7101k freed
[ 16.033555] audit: initializing netlink socket (disabled)
[ 16.033567] audit(1191105805.108:1): initialized
[ 16.033660] highmem bounce pool size: 64 pages
[ 16.035754] VFS: Disk quotas dquot_6.5.1
[ 16.035808] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.035896] io scheduler noop registered
[ 16.035899] io scheduler anticipatory registered
[ 16.035901] io scheduler deadline registered
[ 16.035915] io scheduler cfq registered (default)
[ 16.276517] Boot video device is 0000:01:00.0
[ 16.276600] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 16.276637] assign_interrupt_mode Found MSI capability
[ 16.276668] Allocate Port Service[0000:00:01.0:pcie00]
[ 16.276752] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.276792] assign_interrupt_mode Found MSI capability
[ 16.276825] Allocate Port Service[0000:00:1c.0:pcie00]
[ 16.276861] Allocate Port Service[0000:00:1c.0:pcie02]
[ 16.276944] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 16.276984] assign_interrupt_mode Found MSI capability
[ 16.277017] Allocate Port Service[0000:00:1c.4:pcie00]
[ 16.277051] Allocate Port Service[0000:00:1c.4:pcie02]
[ 16.277137] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 16.277178] assign_interrupt_mode Found MSI capability
[ 16.277210] Allocate Port Service[0000:00:1c.5:pcie00]
[ 16.277247] Allocate Port Service[0000:00:1c.5:pcie02]
[ 16.277405] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using
975k, total 16384k
[ 16.277409] vesafb: mode is 800x600x8, linelength=832, pages=31
[ 16.277411] vesafb: protected mode interface info at c000:a118
[ 16.277413] vesafb: pmi: set display start = c00ca1a6, set palette = c00ca268
[ 16.277415] vesafb: scrolling: redraw
[ 16.277418] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 16.277466] fb0: VESA VGA frame buffer device
[ 16.277509] isapnp: Scanning for PnP cards...
[ 16.585879] isapnp: No Plug & Play device found
[ 16.610118] Real Time Clock Driver v1.12ac
[ 16.610214] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 16.610307] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.610871] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.611569] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 16.611712] input: Macintosh mouse button emulation as /class/input/input0
[ 16.611789] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 16.611792] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 16.614580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.614585] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 16.614747] mice: PS/2 mouse device common for all mice
[ 16.614858] EISA: Probing bus 0 at eisa.0
[ 16.614881] Cannot allocate resource for EISA slot 7
[ 16.614883] Cannot allocate resource for EISA slot 8
[ 16.614884] EISA: Detected 0 cards.
[ 16.615033] TCP cubic registered
[ 16.615044] NET: Registered protocol family 1
[ 16.615062] Using IPI No-Shortcut mode
[ 16.615208] Magic number: 7:218:756
[ 16.615474] Freeing unused kernel memory: 364k freed
[ 16.652483] input: AT Translated Set 2 keyboard as /class/input/input1
[ 17.803833] AppArmor: AppArmor initialized<5>audit(1191105806.608:2):
type=1505 info="AppArmor initialized" pid=1249
[ 17.809605] fuse init (API version 7.8)
[ 17.814047] Failure registering capabilities with primary security module.
[ 17.842267] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 17.842280] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 18.327580] usbcore: registered new interface driver usbfs
[ 18.327615] usbcore: registered new interface driver hub
[ 18.327649] usbcore: registered new device driver usb
[ 18.328709] USB Universal Host Controller Interface driver v3.0
[ 18.328764] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 18.328779] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 18.328784] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 18.328918] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 18.328949] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
[ 18.329082] usb usb1: configuration #1 chosen from 1 choice
[ 18.329123] hub 1-0:1.0: USB hub found
[ 18.329131] hub 1-0:1.0: 2 ports detected
[ 18.432751] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 18.432766] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 18.432771] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 18.432804] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 2
[ 18.432836] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
[ 18.432958] usb usb2: configuration #1 chosen from 1 choice
[ 18.432999] hub 2-0:1.0: USB hub found
[ 18.433007] hub 2-0:1.0: 2 ports detected
[ 18.454623] Floppy drive(s): fd0 is 1.44M
[ 18.507157] SCSI subsystem initialized
[ 18.514743] libata version 2.21 loaded.
[ 18.520899] FDC 0 is a post-1991 82077
[ 18.538538] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 18
[ 18.538552] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 18.538558] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 18.538588] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 3
[ 18.538618] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000d480
[ 18.538740] usb usb3: configuration #1 chosen from 1 choice
[ 18.538777] hub 3-0:1.0: USB hub found
[ 18.538786] hub 3-0:1.0: 2 ports detected
[ 18.640590] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 19
[ 18.640605] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 18.640610] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 18.640645] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 4
[ 18.640676] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 18.640799] usb usb4: configuration #1 chosen from 1 choice
[ 18.640840] hub 4-0:1.0: USB hub found
[ 18.640848] hub 4-0:1.0: 2 ports detected
[ 18.744480] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 20
[ 18.744490] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 18.744495] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 18.744525] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 5
[ 18.744553] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d880
[ 18.744675] usb usb5: configuration #1 chosen from 1 choice
[ 18.744713] hub 5-0:1.0: USB hub found
[ 18.744720] hub 5-0:1.0: 2 ports detected
[ 18.849025] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) ->
IRQ 20
[ 18.849038] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 18.849043] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 18.849075] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 6
[ 18.849108] ehci_hcd 0000:00:1a.7: debug port 1
[ 18.849116] PCI: cache line size of 128 is not supported by device
0000:00:1a.7
[ 18.849124] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xffaffc00
[ 18.853001] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 18.853141] usb usb6: configuration #1 chosen from 1 choice
[ 18.853186] hub 6-0:1.0: USB hub found
[ 18.853196] hub 6-0:1.0: 4 ports detected
[ 18.880279] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 18.956348] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 18
[ 18.956364] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 18.956369] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 18.956400] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 7
[ 18.956434] ehci_hcd 0000:00:1d.7: debug port 1
[ 18.956441] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 18.956450] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffaff800
[ 18.960340] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 18.960436] usb usb7: configuration #1 chosen from 1 choice
[ 18.960478] hub 7-0:1.0: USB hub found
[ 18.960486] hub 7-0:1.0: 6 ports detected
[ 19.064381] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 19.064389] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 19.064431] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 19.064504] scsi0 : pata_jmicron
[ 19.064559] scsi1 : pata_jmicron
[ 19.064718] ata1: PATA max UDMA/100 cmd 0x0001bc00 ctl 0x0001b882 bmdma
0x0001b400 irq 17
[ 19.064725] ata2: PATA max UDMA/100 cmd 0x0001b800 ctl 0x0001b482 bmdma
0x0001b408 irq 17
[ 19.384400] ata1.01: ATAPI: SAMSUNG CDRW/DVD SM-352B, T803, max UDMA/33
[ 19.403872] usb 3-1: device not accepting address 2, error -71
[ 19.556267] ata1.01: configured for UDMA/33
[ 19.722383] scsi 0:0:1:0: CD-ROM SAMSUNG CDRW/DVD SM-352B T803
PQ: 0 ANSI: 5
[ 19.722765] ahci 0000:03:00.0: version 2.2
[ 19.722791] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 19.732841] sr0: scsi3-mmc drive: 1x/52x writer cd/rw xa/form2 cdda tray
[ 19.732846] Uniform CD-ROM driver Revision: 3.20
[ 19.732901] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 19.736631] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 19.887509] usb 3-1: new low speed USB device using uhci_hcd and address 4
[ 20.041578] usb 3-1: configuration #1 chosen from 1 choice
[ 20.054422] usbcore: registered new interface driver hiddev
[ 20.067620] input: HID 062a:0000 as /class/input/input2
[ 20.067648] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.0-1
[ 20.067660] usbcore: registered new interface driver usbhid
[ 20.067664]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 20.722900] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 20.722906] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 20.722914] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 20.723051] scsi2 : ahci
[ 20.723115] scsi3 : ahci
[ 20.723197] ata3: SATA max UDMA/133 cmd 0xf886c100 ctl 0x00000000 bmdma
0x00000000 irq 16
[ 20.723203] ata4: SATA max UDMA/133 cmd 0xf886c180 ctl 0x00000000 bmdma
0x00000000 irq 16
[ 21.034641] ata3: SATA link down (SStatus 0 SControl 300)
[ 21.346404] ata4: SATA link down (SStatus 0 SControl 300)
[ 21.346476] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 21.396549] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]
MMIO=[ff9ff800-ff9fffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 21.396680] ata_piix 0000:00:1f.2: version 2.11
[ 21.396688] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 21.396735] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 19
[ 21.396777] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 21.396844] scsi4 : ata_piix
[ 21.397719] scsi5 : ata_piix
[ 21.397944] ata5: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma
0x0001e400 irq 19
[ 21.397947] ata6: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma
0x0001e408 irq 19
[ 21.598975] ata5.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 21.598980] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 21.665552] ata5.00: configured for UDMA/133
[ 21.873179] ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 21.873184] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 21.939764] ata6.00: configured for UDMA/133
[ 21.939884] scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA
PQ: 0 ANSI: 5
[ 21.939958] scsi 4:0:0:0: Attached scsi generic sg1 type 0
[ 21.940055] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA
PQ: 0 ANSI: 5
[ 21.940125] scsi 5:0:0:0: Attached scsi generic sg2 type 0
[ 21.940155] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 21.940179] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) ->
IRQ 19
[ 21.940214] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 21.940248] scsi6 : ata_piix
[ 21.940302] scsi7 : ata_piix
[ 21.940442] ata7: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d082 bmdma
0x0001c880 irq 19
[ 21.940448] ata8: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001cc02 bmdma
0x0001c888 irq 19
[ 22.277018] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 22.277037] sd 4:0:0:0: [sda] Write Protect is off
[ 22.277041] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.277066] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 22.277133] sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 22.277150] sd 4:0:0:0: [sda] Write Protect is off
[ 22.277155] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.277183] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 22.277190] sda: sda1
[ 22.296211] sd 4:0:0:0: [sda] Attached SCSI disk
[ 22.296273] sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 22.296288] sd 5:0:0:0: [sdb] Write Protect is off
[ 22.296292] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 22.296316] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 22.296369] sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 22.296384] sd 5:0:0:0: [sdb] Write Protect is off
[ 22.296388] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 22.296415] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 22.296419] sdb: sdb1 sdb2 sdb3
[ 22.320345] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 22.495867] Attempting manual resume
[ 22.495871] swsusp: Resume From Partition 8:19
[ 22.495873] PM: Checking swsusp image.
[ 22.496039] PM: Resume from disk failed.
[ 22.528114] kjournald starting. Commit interval 5 seconds
[ 22.528124] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.665534] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000e500f9]
[ 29.895209] iTCO_vendor_support: vendor-support=0
[ 29.896362] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 29.896451] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2,
TCOBASE=0x0860)
[ 29.896504] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 30.063948] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.065901] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.129947] Linux agpgart interface v0.102 (c) Dave Jones
[ 30.274961] input: PC Speaker as /class/input/input3
[ 30.802989] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 30.803004] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 30.803029] sky2 0000:02:00.0: v1.14 addr 0xff7fc000 irq 17 Yukon-EC Ultra
(0xb4) rev 2
[ 30.803291] sky2 eth0: addr 00:18:f3:68:a2:68
[ 30.880526] sky2 eth0: enabling interface
[ 30.883468] sky2 eth0: ram buffer 0K
[ 31.256568] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 31.256593] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 31.278429] NET: Registered protocol family 10
[ 31.278499] lo: Disabled Privacy Extensions
[ 31.278534] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.544241] lp: driver loaded but no devices found
[ 32.557066] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 32.559383] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.602123] Adding 2417772k swap on /dev/sdb3. Priority:-1 extents:1
across:2417772k
[ 32.868624] EXT3 FS on sdb1, internal journal
[ 33.129544] kjournald starting. Commit interval 5 seconds
[ 33.137568] EXT3 FS on sda1, internal journal
[ 33.137575] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.165550] kjournald starting. Commit interval 5 seconds
[ 33.165557] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 33.165913] EXT3 FS on sdb2, internal journal
[ 33.165919] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.167791] No dock devices found.
[ 34.224241] input: Power Button (FF) as /class/input/input4
[ 34.224265] ACPI: Power Button (FF) [PWRF]
[ 34.224377] input: Power Button (CM) as /class/input/input5
[ 34.224406] ACPI: Power Button (CM) [PWRB]
[ 35.735288] ppdev: user-space parallel port driver
[ 36.065227] audit(1191091425.433:3): type=1503 operation="inode_permission"
requested_mask="a" denied_mask="a" name="/dev/tty" pid=5254
profile="/usr/sbin/cupsd"
[ 36.183427] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 36.183434] apm: disabled - APM is not SMP safe.
[ 36.356079] Failure registering capabilities with primary security module.
[ 36.535081] Bluetooth: Core ver 2.11
[ 36.535401] NET: Registered protocol family 31
[ 36.535406] Bluetooth: HCI device and connection manager initialized
[ 36.535412] Bluetooth: HCI socket layer initialized
[ 36.575543] Bluetooth: L2CAP ver 2.8
[ 36.575549] Bluetooth: L2CAP socket layer initialized
[ 36.623114] Bluetooth: RFCOMM socket layer initialized
[ 36.623403] Bluetooth: RFCOMM TTY layer initialized
[ 36.623409] Bluetooth: RFCOMM ver 1.8
[ 43.385680] eth0: no IPv6 routers present
** Affects: ubuntu
Importance: Undecided
Status: New
--
Gusty: cannot switch to virtual consoles
https://bugs.launchpad.net/bugs/146912
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
