Public bug reported: On ConnectX3 device we try to run self-test and it’s failed, also seen that cause a FW reset.
Steps to reproduce: ~# ethtool -t ens2 The test result is FAIL The test extra info: Interrupt Test -16 Link Test 0 Speed Test 0 Register Test 0 Loopback Test 0 ~# dmesg [341548.619799] mlx4_core 0000:07:00.0: command 0x31 timed out (go bit not cleared) [341548.803801] mlx4_core 0000:07:00.0: command 0x49 timed out (go bit not cleared) [341548.803808] mlx4_core 0000:07:00.0: device is going to be reset [341549.816587] mlx4_core 0000:07:00.0: device was reset successfully [341549.823425] mlx4_en 0000:07:00.0: Internal error detected, restarting device ~# cat /etc/os-release NAME="Ubuntu" VERSION="15.10 (Wily Werewolf)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu Wily Werewolf (development branch)" VERSION_ID="15.10" HOME_URL="http://www.ubuntu.com/"; SUPPORT_URL="http://help.ubuntu.com/"; BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"; ~# uname -r 4.2.0-7-generic ~# ethtool -i ens2 driver: mlx4_en version: 2.2-1 (Feb 2014) firmware-version: 2.34.5000 bus-info: 0000:07:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1507482 Title: ethtool self-test failed and creates a FW reset. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1507482/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
