I verified that this bug is *NOT* fixed by trying the exact identical
configuration (which is as minimal as possible) both with Ubuntu Trusty
and with Scientific Linux 6 (RHEL6 clone). The test machine is a Cisco
B200M2 blade server, using the Cisco VIC FCoE HBA (fnic.ko driver). The
storage array is an EMC VNX5300, which is reached via FCoE (inside the
Cisco UCS infrastructure) and then traditional FC fabric.
The following console output is taken with Trusty installed. Note that
it was fully upgraded. After creating /etc/multipath.conf with the
indicated contents, update-initramfs was run and the system rebooted,
just to make sure the settings had taken effect. As you can see from the
output, the dev_loss_tmo and fast_io_fail_tmo settings are *NOT*
applied:
=-=-=-=-=-=-=-=
tore@ucstest-osl2:~$ cat /etc/multipath.conf
devices {
device {
vendor ".*"
product ".*"
fast_io_fail_tmo 3
dev_loss_tmo 2147483647
}
}
multipaths {
multipath {
wwid 3600601603a71320022967e0a1f38e411
alias bootvolume
}
}
tore@ucstest-osl2:~$ sudo multipath -ll
bootvolume (3600601603a71320022967e0a1f38e411) dm-0 DGC,VRAID
size=50G features='1 queue_if_no_path' hwhandler='1 emc' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| |- 0:0:1:0 sdb 8:16 active ready running
| `- 1:0:1:0 sdd 8:48 active ready running
`-+- policy='round-robin 0' prio=0 status=enabled
|- 1:0:0:0 sdc 8:32 active ready running
`- 0:0:0:0 sda 8:0 active ready running
tore@ucstest-osl2:~$ grep . /sys/class/fc_remote_ports/rport-*/*tmo
/sys/class/fc_remote_ports/rport-0:0-0/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-0:0-0/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-0:0-1/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-0:0-1/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-0:0-2/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-0:0-2/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-1:0-0/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-1:0-0/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-1:0-1/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-1:0-1/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-1:0-2/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-1:0-2/fast_io_fail_tmo:off
tore@ucstest-osl2:~$ uname -r
3.13.0-62-generic
tore@ucstest-osl2:~$ md5sum /etc/multipath.conf
27a62898e80a0bcd7e62b5f2e8d675ff /etc/multipath.conf
tore@ucstest-osl2:~$ echo 3 | sudo tee
/sys/class/fc_remote_ports/rport-*/fast_io_fail_tmo
3
tore@ucstest-osl2:~$ echo 2147483647 | sudo tee
/sys/class/fc_remote_ports/rport-*/dev_loss_tmo
2147483647
tore@ucstest-osl2:~$ grep . /sys/class/fc_remote_ports/rport-*/*tmo
/sys/class/fc_remote_ports/rport-0:0-0/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-0:0-0/fast_io_fail_tmo:3
/sys/class/fc_remote_ports/rport-0:0-1/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-0:0-1/fast_io_fail_tmo:3
/sys/class/fc_remote_ports/rport-0:0-2/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-0:0-2/fast_io_fail_tmo:3
/sys/class/fc_remote_ports/rport-1:0-0/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-1:0-0/fast_io_fail_tmo:3
/sys/class/fc_remote_ports/rport-1:0-1/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-1:0-1/fast_io_fail_tmo:3
/sys/class/fc_remote_ports/rport-1:0-2/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-1:0-2/fast_io_fail_tmo:3
tore@ucstest-osl2:~$ dpkg -l multipath-tools
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version
Architecture Description
+++-======================================-========================-========================-=================================================================================
ii multipath-tools 0.4.9-3ubuntu7.4 amd64
maintain multipath block
=-=-=-=-=-=-=-=
This shows the exact same multipath.conf file being used on SL6, and in
this case the sysfs settings *ARE* applied when the multipath map is
registered (no reboot required):
=-=-=-=-=-=-=-=
[root@ucstest-osl2 ~]# uname -r
2.6.32-358.23.2.el6.x86_64
[root@ucstest-osl2 ~]# rpm -qa device-mapper-multipath
device-mapper-multipath-0.4.9-80.el6.x86_64
[root@ucstest-osl2 ~]# grep . /sys/class/fc_remote_ports/rport-*/*tmo
/sys/class/fc_remote_ports/rport-1:0-0/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-1:0-0/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-1:0-1/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-1:0-1/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-1:0-2/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-1:0-2/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-2:0-0/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-2:0-0/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-2:0-1/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-2:0-1/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-2:0-2/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-2:0-2/fast_io_fail_tmo:off
[root@ucstest-osl2 ~]# md5sum /etc/multipath.conf
27a62898e80a0bcd7e62b5f2e8d675ff /etc/multipath.conf
[root@ucstest-osl2 ~]# multipath -v 2
Aug 26 07:06:34 | 35000c50042a362cb: ignoring map
create: bootvolume (3600601603a71320022967e0a1f38e411) undef DGC,VRAID
size=50G features='0' hwhandler='0' wp=undef
|-+- policy='round-robin 0' prio=1 status=undef
| `- 1:0:0:0 sdb 8:16 undef ready running
|-+- policy='round-robin 0' prio=1 status=undef
| `- 1:0:1:0 sdc 8:32 undef ready running
|-+- policy='round-robin 0' prio=1 status=undef
| `- 2:0:0:0 sdd 8:48 undef ready running
`-+- policy='round-robin 0' prio=1 status=undef
`- 2:0:1:0 sde 8:64 undef ready running
[root@ucstest-osl2 ~]# grep . /sys/class/fc_remote_ports/rport-*/*tmo
/sys/class/fc_remote_ports/rport-1:0-0/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-1:0-0/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-1:0-1/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-1:0-1/fast_io_fail_tmo:3
/sys/class/fc_remote_ports/rport-1:0-2/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-1:0-2/fast_io_fail_tmo:3
/sys/class/fc_remote_ports/rport-2:0-0/dev_loss_tmo:30
/sys/class/fc_remote_ports/rport-2:0-0/fast_io_fail_tmo:off
/sys/class/fc_remote_ports/rport-2:0-1/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-2:0-1/fast_io_fail_tmo:3
/sys/class/fc_remote_ports/rport-2:0-2/dev_loss_tmo:2147483647
/sys/class/fc_remote_ports/rport-2:0-2/fast_io_fail_tmo:3
=-=-=-=-=-=-=-=
Tore
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1435706
Title:
DevLossTO, FastIoFailTO settings do not match multipath.conf expected
values
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/1435706/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
