I moved all the info into an attachment. Ideally each thing should be
moved to its own attachment properly named. I also updated the subject
to something more descriptive (although not much better).

** Summary changed:

- Sound not working properly
+ xine was unable to initialize any audio drivers

** Description changed:

  I just upgrades my music juke box to Feisty, I have two sound cards in
  the machine and both were working fine before the upgrade.  I use Amorak
  to manage my collection.  Now when I try to play a track with amarok
  using using the ALSA output plugin i get the following message: "xine
  was unable to initialize any audio drivers."  When I switch the plug in
  to autodetect, sound play but the sound now alternates between my two
  cards. One track play out one card then the other track in the playlist
  play out the other.  Also when I change sound driver in the GNOME Sound
  settings from Autodetect to ALSA, I am no longer able to hear the test
  sound.
- 
- Here are some outputs:
- 
- [EMAIL PROTECTED]:/var/log$ tail -2 /proc/asound/oss/sndstat
- 0: SigmaTel STAC9708,11
- 1: Analog Devices AD1981A
- 
- [EMAIL PROTECTED]:/var/log$ amixer
- Simple mixer control 'Master',0
-   Capabilities: pvolume pswitch pswitch-joined
-   Playback channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Mono:
-   Front Left: Playback 12 [39%] [-28.50dB] [on]
-   Front Right: Playback 12 [39%] [-28.50dB] [on]
- Simple mixer control 'Master Mono',0
-   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
-   Playback channels: Mono
-   Limits: Playback 0 - 31
-   Mono: Playback 0 [0%] [-46.50dB] [off]
- Simple mixer control '3D Control - Switch',0
-   Capabilities: pswitch pswitch-joined
-   Playback channels: Mono
-   Mono: Playback [off]
- Simple mixer control '3D Control Sigmatel - Depth',0
-   Capabilities: volume volume-joined
-   Playback channels: Mono
-   Capture channels: Mono
-   Limits: 0 - 3
-   Mono: 0 [0%]
- Simple mixer control '3D Control Sigmatel - Rear Depth',0
-   Capabilities: volume volume-joined
-   Playback channels: Mono
-   Capture channels: Mono
-   Limits: 0 - 3
-   Mono: 0 [0%]
- Simple mixer control 'PCM',0
-   Capabilities: pvolume pswitch pswitch-joined
-   Playback channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Mono:
-   Front Left: Playback 20 [65%] [-4.50dB] [on]
-   Front Right: Playback 20 [65%] [-4.50dB] [on]
- Simple mixer control 'Surround',0
-   Capabilities: pvolume pswitch
-   Playback channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Mono:
-   Front Left: Playback 0 [0%] [-46.50dB] [off]
-   Front Right: Playback 0 [0%] [-46.50dB] [off]
- Simple mixer control 'Line',0
-   Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
-   Capture exclusive group: 0
-   Playback channels: Front Left - Front Right
-   Capture channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
-   Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
- Simple mixer control 'CD',0
-   Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
-   Capture exclusive group: 0
-   Playback channels: Front Left - Front Right
-   Capture channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Front Left: Playback 27 [87%] [6.00dB] [on] Capture [off]
-   Front Right: Playback 27 [87%] [6.00dB] [on] Capture [off]
- Simple mixer control 'Mic',0
-   Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch 
cswitch-exclusive
-   Capture exclusive group: 0
-   Playback channels: Mono
-   Capture channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Mono: Playback 0 [0%] [-34.50dB] [off]
-   Front Left: Capture [on]
-   Front Right: Capture [on]
- Simple mixer control 'Mic Boost (+20dB)',0
-   Capabilities: pswitch pswitch-joined
-   Playback channels: Mono
-   Mono: Playback [off]
- Simple mixer control 'Mic Select',0
-   Capabilities: enum
-   Items: 'Mic1' 'Mic2'
-   Item0: 'Mic1'
- Simple mixer control 'Video',0
-   Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
-   Capture exclusive group: 0
-   Playback channels: Front Left - Front Right
-   Capture channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
-   Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
- Simple mixer control 'Phone',0
-   Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch 
cswitch-exclusive
-   Capture exclusive group: 0
-   Playback channels: Mono
-   Capture channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Mono: Playback 0 [0%] [-34.50dB] [off]
-   Front Left: Capture [off]
-   Front Right: Capture [off]
- Simple mixer control 'PC Speaker',0
-   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
-   Playback channels: Mono
-   Limits: Playback 0 - 15
-   Mono: Playback 0 [0%] [-45.00dB] [off]
- Simple mixer control 'Aux',0
-   Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
-   Capture exclusive group: 0
-   Playback channels: Front Left - Front Right
-   Capture channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
-   Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
- Simple mixer control 'Mono Output Select',0
-   Capabilities: enum
-   Items: 'Mix' 'Mic'
-   Item0: 'Mix'
- Simple mixer control 'Capture',0
-   Capabilities: cvolume cswitch cswitch-joined
-   Capture channels: Front Left - Front Right
-   Limits: Capture 0 - 15
-   Front Left: Capture 0 [0%] [0.00dB] [on]
-   Front Right: Capture 0 [0%] [0.00dB] [on]
- Simple mixer control 'Mix',0
-   Capabilities: cswitch cswitch-exclusive
-   Capture exclusive group: 0
-   Capture channels: Front Left - Front Right
-   Front Left: Capture [off]
-   Front Right: Capture [off]
- Simple mixer control 'Mix Mono',0
-   Capabilities: cswitch cswitch-exclusive
-   Capture exclusive group: 0
-   Capture channels: Front Left - Front Right
-   Front Left: Capture [off]
-   Front Right: Capture [off]
- Simple mixer control 'Analog/Digital Output Jack',0
-   Capabilities: pswitch pswitch-joined
-   Playback channels: Mono
-   Mono: Playback [off]
- Simple mixer control 'External Amplifier',0
-   Capabilities: pswitch pswitch-joined
-   Playback channels: Mono
-   Mono: Playback [on]
- Simple mixer control 'Sigmatel 4-Speaker Stereo',0
-   Capabilities: pswitch pswitch-joined
-   Playback channels: Mono
-   Mono: Playback [off]
- Simple mixer control 'Sigmatel Output Bias',0
-   Capabilities: pswitch pswitch-joined
-   Playback channels: Mono
-   Mono: Playback [off]
- Simple mixer control 'Sigmatel Surround',0
-   Capabilities: pvolume pswitch pswitch-joined
-   Playback channels: Front Left - Front Right
-   Limits: Playback 0 - 31
-   Mono:
-   Front Left: Playback 0 [0%] [-46.50dB] [off]
-   Front Right: Playback 0 [0%] [-46.50dB] [off]
- Simple mixer control 'Sigmatel Surround Phase Inversion Playback ',0
-   Capabilities: pswitch pswitch-joined
-   Playback channels: Mono
-   Mono: Playback [off]
- 
- [EMAIL PROTECTED]:/var/log$ lspci -nv
- 00:00.0 0600: 8086:2560 (rev 01)
-         Subsystem: 1028:0142
-         Flags: bus master, fast devsel, latency 0
-         Memory at e0000000 (32-bit, prefetchable) [size=128M]
-         Capabilities: <access denied>
- 
- 00:01.0 0604: 8086:2561 (rev 01) (prog-if 00 [Normal decode])
-         Flags: bus master, 66MHz, fast devsel, latency 64
-         Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
-         I/O behind bridge: 0000e000-0000efff
-         Memory behind bridge: ff800000-ff9fffff
-         Prefetchable memory behind bridge: e8000000-f7ffffff
- 
- 00:1d.0 0c03: 8086:24c2 (rev 01) (prog-if 00 [UHCI])
-         Subsystem: 1028:0142
-         Flags: bus master, medium devsel, latency 0, IRQ 17
-         I/O ports at ff80 [size=32]
- 
- 00:1d.1 0c03: 8086:24c4 (rev 01) (prog-if 00 [UHCI])
-         Subsystem: 1028:0142
-         Flags: bus master, medium devsel, latency 0, IRQ 18
-         I/O ports at ff60 [size=32]
- 
- 00:1d.2 0c03: 8086:24c7 (rev 01) (prog-if 00 [UHCI])
-         Subsystem: 1028:0142
-         Flags: bus master, medium devsel, latency 0, IRQ 19
-         I/O ports at ff40 [size=32]
- 
- 00:1d.7 0c03: 8086:24cd (rev 01) (prog-if 20 [EHCI])
-         Subsystem: 1028:0142
-         Flags: bus master, medium devsel, latency 0, IRQ 20
-         Memory at ffa10800 (32-bit, non-prefetchable) [size=1K]
-         Capabilities: <access denied>
- 
- 00:1e.0 0604: 8086:244e (rev 81) (prog-if 00 [Normal decode])
-         Flags: bus master, fast devsel, latency 0
-         Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
-         I/O behind bridge: 0000d000-0000dfff
-         Memory behind bridge: ff600000-ff7fffff
- 
- 00:1f.0 0601: 8086:24c0 (rev 01)
-         Flags: bus master, medium devsel, latency 0
- 
- 00:1f.1 0101: 8086:24cb (rev 01) (prog-if 8a [Master SecP PriP])
-         Subsystem: 1028:0142
-         Flags: bus master, medium devsel, latency 0, IRQ 19
-         I/O ports at 01f0 [size=8]
-         I/O ports at 03f4 [size=1]
-         I/O ports at 0170 [size=8]
-         I/O ports at 0374 [size=1]
-         I/O ports at ffa0 [size=16]
-         Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
- 
- 00:1f.3 0c05: 8086:24c3 (rev 01)
-         Subsystem: 1028:0142
-         Flags: medium devsel, IRQ 11
-         I/O ports at cc80 [size=32]
- 
- 00:1f.5 0401: 8086:24c5 (rev 01)
-         Subsystem: 1028:0142
-         Flags: bus master, medium devsel, latency 0, IRQ 22
-         I/O ports at c800 [size=256]
-         I/O ports at cc40 [size=64]
-         Memory at ffa10400 (32-bit, non-prefetchable) [size=512]
-         Memory at ffa10000 (32-bit, non-prefetchable) [size=256]
-         Capabilities: <access denied>
- 
- 01:00.0 0300: 1002:5960 (rev 01) (prog-if 00 [VGA])
-         Subsystem: 148c:2094
-         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
-         Memory at f0000000 (32-bit, prefetchable) [size=128M]
-         I/O ports at ec00 [size=256]
-         Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
-         Expansion ROM at ff800000 [disabled] [size=128K]
-         Capabilities: <access denied>
- 
- 01:00.1 0380: 1002:5940 (rev 01)
-         Subsystem: 148c:2095
-         Flags: bus master, 66MHz, medium devsel, latency 64
-         Memory at e8000000 (32-bit, prefetchable) [size=128M]
-         Memory at ff8e0000 (32-bit, non-prefetchable) [size=64K]
-         Capabilities: <access denied>
- 
- 02:01.0 0703: 14e4:4212 (rev 02) (prog-if 00 [Generic])
-         Subsystem: 1028:0001
-         Flags: bus master, fast devsel, latency 64, IRQ 16
-         Memory at ff6ff000 (32-bit, non-prefetchable) [size=4K]
-         I/O ports at dcf0 [size=16]
-         Capabilities: <access denied>
- 
- 02:02.0 0401: 1102:0006
-         Subsystem: 1102:1003
-         Flags: bus master, medium devsel, latency 64, IRQ 19
-         I/O ports at dcc0 [size=32]
-         Capabilities: <access denied>
- 
- 02:02.1 0980: 1102:7004
-         Subsystem: 1102:1003
-         Flags: bus master, medium devsel, latency 64
-         I/O ports at dce8 [size=8]
-         Capabilities: <access denied>
- 
- 02:08.0 0200: 8086:1039 (rev 81)
-         Subsystem: 1028:0142
-         Flags: bus master, medium devsel, latency 64, IRQ 21
-         Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]
-         I/O ports at dc80 [size=64]
-         Capabilities: <access denied>
- 
- [EMAIL PROTECTED]:/var/log$ asoundconf list
- Names of available sound cards:
- Live
- I82801DBICH4
- [EMAIL PROTECTED]:/var/log$ 
- 
- [EMAIL PROTECTED]:/var/log$ cat /etc/asound.conf ~/.asoundrc*
- cat: /etc/asound.conf: No such file or directory
- # ALSA library configuration file
- 
- # Include settings that are under the control of asoundconf(1).
- # (To disable these settings, comment out this line.)
- </home/richard/.asoundrc.asoundconf>
- 
- # ALSA library configuration file managed by asoundconf(1).
- #
- # MANUAL CHANGES TO THIS FILE WILL BE OVERWRITTEN!
- #
- # Manual changes to the ALSA library configuration should be implemented
- # by editing the ~/.asoundrc file, not by editing this file.
- !defaults.pcm.card Live
- defaults.ctl.card Live
- defaults.pcm.device 0
- defaults.pcm.subdevice -1
- defaults.pcm.nonblock 1
- defaults.pcm.ipc_key 5678293
- defaults.pcm.ipc_gid audio
- defaults.pcm.ipc_perm 0660
- defaults.pcm.dmix_max_periods 0
- defaults.rawmidi.card 0
- defaults.rawmidi.device 0
- defaults.rawmidi.subdevice -1
- defaults.hwdep.card 0
- defaults.hwdep.device 0
- defaults.timer.class 2
- defaults.timer.sclass 0
- defaults.timer.card 0
- defaults.timer.device 0
- defaults.timer.subdevice 0
- 
- 
- [EMAIL PROTECTED]:/var/log$ dmesg
- [    0.000000] Linux version 2.6.20-12-generic ([EMAIL PROTECTED]) (gcc 
version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Mar 18 03:07:14 UTC 2007 
(Ubuntu 2.6.20-12.19-generic)
- [    0.000000] BIOS-provided physical RAM map:
- [    0.000000] sanitize start
- [    0.000000] sanitize end
- [    0.000000] copy_e820_map() start: 0000000000000000 size: 00000000000a0000 
end: 00000000000a0000 type: 1
- [    0.000000] copy_e820_map() type is E820_RAM
- [    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 
end: 0000000000100000 type: 2
- [    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fe75000 
end: 000000003ff75000 type: 1
- [    0.000000] copy_e820_map() type is E820_RAM
- [    0.000000] copy_e820_map() start: 000000003ff75000 size: 0000000000002000 
end: 000000003ff77000 type: 4
- [    0.000000] copy_e820_map() start: 000000003ff77000 size: 0000000000021000 
end: 000000003ff98000 type: 3
- [    0.000000] copy_e820_map() start: 000000003ff98000 size: 0000000000068000 
end: 0000000040000000 type: 2
- [    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 
end: 00000000fec10000 type: 2
- [    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000010000 
end: 00000000fee10000 type: 2
- [    0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 
end: 0000000100000000 type: 2
- [    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
- [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [    0.000000]  BIOS-e820: 0000000000100000 - 000000003ff75000 (usable)
- [    0.000000]  BIOS-e820: 000000003ff75000 - 000000003ff77000 (ACPI NVS)
- [    0.000000]  BIOS-e820: 000000003ff77000 - 000000003ff98000 (ACPI data)
- [    0.000000]  BIOS-e820: 000000003ff98000 - 0000000040000000 (reserved)
- [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
- [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
- [    0.000000] 127MB HIGHMEM available.
- [    0.000000] 896MB LOWMEM available.
- [    0.000000] found SMP MP-table at 000fe710
- [    0.000000] Entering add_active_range(0, 0, 262005) 0 entries of 256 used
- [    0.000000] Zone PFN ranges:
- [    0.000000]   DMA             0 ->     4096
- [    0.000000]   Normal       4096 ->   229376
- [    0.000000]   HighMem    229376 ->   262005
- [    0.000000] early_node_map[1] active PFN ranges
- [    0.000000]     0:        0 ->   262005
- [    0.000000] On node 0 totalpages: 262005
- [    0.000000]   DMA zone: 32 pages used for memmap
- [    0.000000]   DMA zone: 0 pages reserved
- [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
- [    0.000000]   Normal zone: 1760 pages used for memmap
- [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
- [    0.000000]   HighMem zone: 254 pages used for memmap
- [    0.000000]   HighMem zone: 32375 pages, LIFO batch:7
- [    0.000000] DMI 2.3 present.
- [    0.000000] ACPI: RSDP (v000 DELL                                  ) @ 
0x000feb90
- [    0.000000] ACPI: RSDT (v001 DELL    4550    0x00000007 ASL  0x00000061) @ 
0x000fd4f6
- [    0.000000] ACPI: FADT (v001 DELL    4550    0x00000007 ASL  0x00000061) @ 
0x000fd52e
- [    0.000000] ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 
0xfffd0a4d
- [    0.000000] ACPI: MADT (v001 DELL    4550    0x00000007 ASL  0x00000061) @ 
0x000fd5a2
- [    0.000000] ACPI: BOOT (v001 DELL    4550    0x00000007 ASL  0x00000061) @ 
0x000fd60e
- [    0.000000] ACPI: ASF! (v016 DELL    4550    0x00000007 ASL  0x00000061) @ 
0x000fd636
- [    0.000000] ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 
0x00000000
- [    0.000000] ACPI: PM-Timer IO Port: 0x808
- [    0.000000] ACPI: Local APIC address 0xfee00000
- [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [    0.000000] Processor #0 15:2 APIC version 20
- [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
- [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
- [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
- [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [    0.000000] ACPI: IRQ0 used by override.
- [    0.000000] ACPI: IRQ2 used by override.
- [    0.000000] ACPI: IRQ9 used by override.
- [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
- [    0.000000] Using ACPI (MADT) for SMP configuration information
- [    0.000000] Allocating PCI resources starting at 50000000 (gap: 
40000000:bec00000)
- [    0.000000] Detected 1993.596 MHz processor.
- [   12.335739] Built 1 zonelists.  Total pages: 259959
- [   12.335746] Kernel command line: 
root=UUID=b1bf2df9-dc6c-4e44-ac36-bc5654f60124 ro quiet splash
- [   12.335960] mapped APIC to ffffd000 (fee00000)
- [   12.335963] mapped IOAPIC to ffffc000 (fec00000)
- [   12.335968] Enabling fast FPU save and restore... done.
- [   12.335972] Enabling unmasked SIMD FPU exception support... done.
- [   12.335991] Initializing CPU#0
- [   12.336107] PID hash table entries: 4096 (order: 12, 16384 bytes)
- [   12.337462] Console: colour VGA+ 80x25
- [   12.338451] Dentry cache hash table entries: 131072 (order: 7, 524288 
bytes)
- [   12.339442] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [   12.378161] Memory: 1027968k/1048020k available (1990k kernel code, 19384k 
reserved, 890k data, 328k init, 130516k highmem)
- [   12.378176] virtual kernel memory layout:
- [   12.378178]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
- [   12.378179]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
- [   12.378181]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
- [   12.378182]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
- [   12.378184]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
- [   12.378185]       .data : 0xc02f1b24 - 0xc03d06d4   ( 890 kB)
- [   12.378187]       .text : 0xc0100000 - 0xc02f1b24   (1990 kB)
- [   12.378191] Checking if this processor honours the WP bit even in 
supervisor mode... Ok.
- [   12.455966] Calibrating delay using timer specific routine.. 3990.96 
BogoMIPS (lpj=7981926)
- [   12.456038] Security Framework v1.0.0 initialized
- [   12.456056] SELinux:  Disabled at boot.
- [   12.456080] Mount-cache hash table entries: 512
- [   12.456348] CPU: After generic identify, caps: bfebfbff 00000000 00000000 
00000000 00000400 00000000 00000000
- [   12.456366] CPU: Trace cache: 12K uops, L1 D cache: 8K
- [   12.456370] CPU: L2 cache: 512K
- [   12.456374] CPU: Hyper-Threading is disabled
- [   12.456377] CPU: After all inits, caps: bfebfbff 00000000 00000000 
00003080 00000400 00000000 00000000
- [   12.456397] Compat vDSO mapped to ffffe000.
- [   12.456405] Remapping vsyscall page to ffffe000
- [   12.456425] Checking 'hlt' instruction... OK.
- [   12.472152] SMP alternatives: switching to UP code
- [   12.472558] Freeing SMP alternatives: 11k freed
- [   12.472849] Early unpacking initramfs... done
- [   12.857319] ACPI: Core revision 20060707
- [   12.863555] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml 
not found.
- [   12.887694] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 07
- [   12.887750] Total of 1 processors activated (3990.96 BogoMIPS).
- [   12.887898] ENABLING IO-APIC IRQs
- [   12.888107] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- [   13.035311] Brought up 1 CPUs
- [   13.035642] Booting paravirtualized kernel on bare hardware
- [   13.035733] Time:  3:15:34  Date: 02/20/107
- [   13.035773] NET: Registered protocol family 16
- [   13.035900] EISA bus registered
- [   13.035907] ACPI: bus type pci registered
- [   13.062607] PCI: PCI BIOS revision 2.10 entry at 0xfbe6d, last bus=2
- [   13.062610] PCI: Using configuration type 1
- [   13.062612] Setting up standard PCI resources
- [   13.092141] ACPI: Interpreter enabled
- [   13.092146] ACPI: Using IOAPIC for interrupt routing
- [   13.097228] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [   13.097240] PCI: Probing PCI hardware (bus 00)
- [   13.097266] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
- [   13.097765] * The chipset may have PM-Timer Bug. Due to workarounds for a 
bug,
- [   13.097767] * this clock source is slow. If you are sure your timer does 
not have
- [   13.097769] * this bug, please use "acpi_pm_good" to disable the workaround
- [   13.097823] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
- [   13.097828] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
- [   13.098116] Boot video device is 0000:01:00.0
- [   13.098489] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, 
disabling
- [   13.098572] PCI: Transparent bridge - 0000:00:1e.0
- [   13.098606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [   13.144569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
- [   13.164925] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
- [   13.165747] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
- [   13.166572] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
- [   13.167406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
- [   13.168239] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15)
- [   13.169077] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) 
*0, disabled.
- [   13.169898] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 15)
- [   13.170715] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
- [   13.170908] Linux Plug and Play Support v0.97 (c) Adam Belay
- [   13.170923] pnp: PnP ACPI init
- [   13.202209] pnp: PnP ACPI: found 12 devices
- [   13.202217] PnPBIOS: Disabled by ACPI PNP
- [   13.202290] PCI: Using ACPI for IRQ routing
- [   13.202295] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
- [   13.212858] NET: Registered protocol family 8
- [   13.212862] NET: Registered protocol family 20
- [   13.220320] pnp: 00:0b: ioport range 0x800-0x85f could not be reserved
- [   13.220324] pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved
- [   13.220328] pnp: 00:0b: ioport range 0x860-0x8ff could not be reserved
- [   13.220743] PCI: Bridge: 0000:00:01.0
- [   13.220748]   IO window: e000-efff
- [   13.220756]   MEM window: ff800000-ff9fffff
- [   13.220762]   PREFETCH window: e8000000-f7ffffff
- [   13.220769] PCI: Bridge: 0000:00:1e.0
- [   13.220773]   IO window: d000-dfff
- [   13.220780]   MEM window: ff600000-ff7fffff
- [   13.220785]   PREFETCH window: disabled.
- [   13.220807] PCI: Setting latency timer of device 0000:00:1e.0 to 64
- [   13.220844] NET: Registered protocol family 2
- [   13.259102] IP route cache hash table entries: 32768 (order: 5, 131072 
bytes)
- [   13.259397] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
- [   13.260689] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [   13.261573] TCP: Hash tables configured (established 131072 bind 65536)
- [   13.261580] TCP reno registered
- [   13.271216] checking if image is initramfs... it is
- [   14.028075] Freeing initrd memory: 6699k freed
- [   14.028380] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
- [   14.028384] Simple Boot Flag at 0x7a set to 0x1
- [   14.028710] audit: initializing netlink socket (disabled)
- [   14.028731] audit(1174360534.776:1): initialized
- [   14.028855] highmem bounce pool size: 64 pages
- [   14.028935] VFS: Disk quotas dquot_6.5.1
- [   14.028965] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [   14.029042] io scheduler noop registered
- [   14.029046] io scheduler anticipatory registered
- [   14.029050] io scheduler deadline registered
- [   14.029063] io scheduler cfq registered (default)
- [   14.029455] isapnp: Scanning for PnP cards...
- [   14.383259] isapnp: No Plug & Play device found
- [   14.417396] Real Time Clock Driver v1.12ac
- [   14.417462] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ 
sharing enabled
- [   14.417657] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [   14.418670] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [   14.418939] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> 
IRQ 16
- [   14.419571] mice: PS/2 mouse device common for all mice
- [   14.420378] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
- [   14.420722] input: Macintosh mouse button emulation as /class/input/input0
- [   14.420771] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- [   14.420776] ide: Assuming 33MHz system bus speed for PIO modes; override 
with idebus=xx
- [   14.421074] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 
irq 1,12
- [   14.424827] serio: i8042 KBD port at 0x60,0x64 irq 1
- [   14.424837] serio: i8042 AUX port at 0x60,0x64 irq 12
- [   14.425065] EISA: Probing bus 0 at eisa.0
- [   14.425111] EISA: Detected 0 cards.
- [   14.455209] TCP cubic registered
- [   14.455220] NET: Registered protocol family 1
- [   14.455250] Using IPI No-Shortcut mode
- [   14.455344] ACPI: (supports S0 S1 S3 S4 S5)
- [   14.455406]   Magic number: 15:517:260
- [   14.455462]   hash matches device ttyx2
- [   14.456119] Freeing unused kernel memory: 328k freed
- [   14.457505] Time: tsc clocksource has been installed.
- [   14.470366] input: AT Translated Set 2 keyboard as /class/input/input1
- [   15.755117] Capability LSM initialized
- [   15.921780] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor 
Device is not present [20060707]
- [   16.660155] usbcore: registered new interface driver usbfs
- [   16.660193] usbcore: registered new interface driver hub
- [   16.660226] usbcore: registered new device driver usb
- [   16.661437] USB Universal Host Controller Interface driver v3.0
- [   16.661508] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> 
IRQ 17
- [   16.661524] PCI: Setting latency timer of device 0000:00:1d.0 to 64
- [   16.661530] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [   16.661712] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 1
- [   16.661743] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80
- [   16.661904] usb usb1: configuration #1 chosen from 1 choice
- [   16.661940] hub 1-0:1.0: USB hub found
- [   16.661951] hub 1-0:1.0: 2 ports detected
- [   16.762935] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> 
IRQ 18
- [   16.762952] PCI: Setting latency timer of device 0000:00:1d.1 to 64
- [   16.762957] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [   16.762988] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 2
- [   16.763020] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
- [   16.763148] usb usb2: configuration #1 chosen from 1 choice
- [   16.763186] hub 2-0:1.0: USB hub found
- [   16.763198] hub 2-0:1.0: 2 ports detected
- [   16.797164] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
- [   16.797169] e100: Copyright(c) 1999-2006 Intel Corporation
- [   16.866855] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 19
- [   16.866871] PCI: Setting latency timer of device 0000:00:1d.2 to 64
- [   16.866877] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [   16.866910] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 3
- [   16.866942] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ff40
- [   16.867070] usb usb3: configuration #1 chosen from 1 choice
- [   16.867106] hub 3-0:1.0: USB hub found
- [   16.867117] hub 3-0:1.0: 2 ports detected
- [   16.906189] Floppy drive(s): fd0 is 1.44M
- [   16.944911] FDC 0 is a post-1991 82077
- [   16.971013] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> 
IRQ 20
- [   16.971035] PCI: Setting latency timer of device 0000:00:1d.7 to 64
- [   16.971040] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [   16.971080] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus 
number 4
- [   16.971127] ehci_hcd 0000:00:1d.7: debug port 1
- [   16.971135] PCI: cache line size of 128 is not supported by device 
0000:00:1d.7
- [   16.971149] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa10800
- [   16.975037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
- [   16.975145] usb usb4: configuration #1 chosen from 1 choice
- [   16.975179] hub 4-0:1.0: USB hub found
- [   16.975191] hub 4-0:1.0: 6 ports detected
- [   17.086742] SCSI subsystem initialized
- [   17.093754] libata version 2.20 loaded.
- [   17.098583] ata_piix 0000:00:1f.1: version 2.10ac1
- [   17.098603] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
- [   17.098612] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> 
IRQ 19
- [   17.098636] PCI: Setting latency timer of device 0000:00:1f.1 to 64
- [   17.098705] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 
0x0001ffa0 irq 14
- [   17.098751] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 
0x0001ffa8 irq 15
- [   17.098777] scsi0 : ata_piix
- [   17.486092] ata1.00: ATA-6: ST3120023A, 3.33, max UDMA/100
- [   17.486098] ata1.00: 234441648 sectors, multi 8: LBA 
- [   17.494084] ata1.01: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
- [   17.494090] ata1.01: 625142448 sectors, multi 8: LBA48 
- [   17.502065] ata1.00: configured for UDMA/33
- [   17.510055] ata1.01: configured for UDMA/100
- [   17.510071] scsi1 : ata_piix
- [   17.829671] ata2.00: ATAPI, max UDMA/33
- [   17.993468] ata2.01: ATAPI, max UDMA/33
- [   18.157273] ata2.00: configured for UDMA/33
- [   18.321072] ata2.01: configured for UDMA/33
- [   18.321239] scsi 0:0:0:0: Direct-Access     ATA      ST3120023A       3.33 
PQ: 0 ANSI: 5
- [   18.321727] scsi 0:0:1:0: Direct-Access     ATA      Hitachi HDT72503 V54O 
PQ: 0 ANSI: 5
- [   18.325743] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A102 
PQ: 0 ANSI: 5
- [   18.326280] scsi 1:0:1:0: CD-ROM            HL-DT-ST CD-RW GCE-8400B  B104 
PQ: 0 ANSI: 5
- [   18.326752] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> 
IRQ 21
- [   18.350148] e100: eth0: e100_probe: addr 0xff6fe000, irq 21, MAC addr 
00:07:E9:D6:B5:E0
- [   18.376443] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
- [   18.376483] sda: Write Protect is off
- [   18.376487] sda: Mode Sense: 00 3a 00 00
- [   18.376511] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
- [   18.376594] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
- [   18.376608] sda: Write Protect is off
- [   18.376611] sda: Mode Sense: 00 3a 00 00
- [   18.376634] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
- [   18.376638]  sda: sda1 sda2 < sda5 > sda3 sda4
- [   18.402287] sd 0:0:0:0: Attached scsi disk sda
- [   18.403168] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
- [   18.403187] sdb: Write Protect is off
- [   18.403190] sdb: Mode Sense: 00 3a 00 00
- [   18.403214] SCSI device sdb: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
- [   18.403275] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
- [   18.403290] sdb: Write Protect is off
- [   18.403292] sdb: Mode Sense: 00 3a 00 00
- [   18.403315] SCSI device sdb: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
- [   18.403320]  sdb: sdb1
- [   18.413618] sd 0:0:1:0: Attached scsi disk sdb
- [   18.419085] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [   18.419119] sd 0:0:1:0: Attached scsi generic sg1 type 0
- [   18.419144] scsi 1:0:0:0: Attached scsi generic sg2 type 5
- [   18.419167] scsi 1:0:1:0: Attached scsi generic sg3 type 5
- [   18.474834] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 
cdda tray
- [   18.474843] Uniform CD-ROM driver Revision: 3.20
- [   18.475132] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [   18.477852] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
- [   18.478060] sr 1:0:1:0: Attached scsi CD-ROM sr1
- [   18.779146] Attempting manual resume
- [   18.779151] swsusp: Resume From Partition 8:5
- [   18.779154] PM: Checking swsusp image.
- [   18.779505] PM: Resume from disk failed.
- [   18.805445] kjournald starting.  Commit interval 5 seconds
- [   18.805461] EXT3-fs: mounted filesystem with ordered data mode.
- [   27.361985] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
- [   28.500557] NET: Registered protocol family 10
- [   28.500694] lo: Disabled Privacy Extensions
- [   29.545293] Linux agpgart interface v0.101 (c) Dave Jones
- [   29.548419] agpgart: Detected an Intel 845G Chipset.
- [   29.556015] agpgart: AGP aperture is 128M @ 0xe0000000
- [   29.571826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [   29.623166] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [   30.311637] iTCO_vendor_support: vendor-support=0
- [   30.377224] gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xdce8, 
speed 1011kHz
- [   30.557092] logips2pp: Detected unknown logitech mouse model 101
- [   30.574496] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
- [   30.761890] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> 
IRQ 19
- [   30.761926] Model 1003 Rev 00000000 Serial 10031102
- [   31.018722] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> 
IRQ 22
- [   31.018758] PCI: Setting latency timer of device 0000:00:1f.5 to 64
- [   31.035694] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
- [   31.037891] parport: PnPBIOS parport detected.
- [   31.037947] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO 
[PCSPP,TRISTATE,COMPAT,ECP]
- [   31.039059] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
- [   31.039110] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [   31.050947] input: PC Speaker as /class/input/input3
- [   31.071289] intel_rng: Firmware space is locked read-only. If you can't or
- [   31.071292] intel_rng: don't want to disable this in firmware setup, and if
- [   31.071294] intel_rng: you are certain that your system has a functional
- [   31.071296] intel_rng: RNG, try using the 'no_fwh_detect' option.
- [   31.333049] intel8x0_measure_ac97_clock: measured 54087 usecs
- [   31.333056] intel8x0: clocking to 48000
- [   31.687898] lp0: using parport0 (interrupt-driven).
- [   31.753098] Adding 746980k swap on 
/dev/disk/by-uuid/c95dce39-8c71-4f47-86bc-74df05ad07b6.  Priority:-1 extents:1 
across:746980k
- [   31.881258] EXT3 FS on sda3, internal journal
- [   39.287382] eth0: no IPv6 routers present
- [  201.356300] kjournald starting.  Commit interval 5 seconds
- [  201.356539] EXT3 FS on sda1, internal journal
- [  201.356546] EXT3-fs: mounted filesystem with ordered data mode.
- [  201.401630] kjournald starting.  Commit interval 5 seconds
- [  201.401966] EXT3 FS on sda4, internal journal
- [  201.401973] EXT3-fs: mounted filesystem with ordered data mode.
- [  201.407631] kjournald starting.  Commit interval 5 seconds
- [  201.407986] EXT3 FS on sdb1, internal journal
- [  201.407992] EXT3-fs: mounted filesystem with ordered data mode.
- [  205.106053] input: Power Button (FF) as /class/input/input4
- [  205.106344] ACPI: Power Button (FF) [PWRF]
- [  205.134032] input: Power Button (CM) as /class/input/input5
- [  205.134338] ACPI: Power Button (CM) [VBTN]
- [  205.178108] Using specific hotkey driver
- [  205.293869] No dock devices found.
- [  205.391675] ibm_acpi: ec object not found
- [  205.562635] pcc_acpi: loading...
- [  212.655048] NET: Registered protocol family 17
- [  213.241457] ppdev: user-space parallel port driver
- [  213.489555] [drm] Initialized drm 1.1.0 20060810
- [  213.517496] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> 
IRQ 17
- [  213.518743] [drm] Initialized radeon 1.25.0 20060524 on minor 0
- [  216.530942] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
- [  216.531136] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
- [  216.531329] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
- [  216.894837] [drm] Setting GART location based on new memory map
- [  216.894852] [drm] Loading R200 Microcode
- [  216.894908] [drm] writeback test succeeded in 1 usecs
- [  222.960306] eth0: no IPv6 routers present
- [  225.062186] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
- [  225.062194] apm: overridden by ACPI.
- [  225.663359] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
- [  225.807207] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state 
recovery directory
- [  225.808038] NFSD: starting 90-second grace period
- [  228.075916] Bluetooth: Core ver 2.11
- [  228.075999] NET: Registered protocol family 31
- [  228.076002] Bluetooth: HCI device and connection manager initialized
- [  228.076007] Bluetooth: HCI socket layer initialized
- [  228.161326] Bluetooth: L2CAP ver 2.8
- [  228.161333] Bluetooth: L2CAP socket layer initialized
- [  228.302932] Bluetooth: RFCOMM socket layer initialized
- [  228.302954] Bluetooth: RFCOMM TTY layer initialized
- [  228.302957] Bluetooth: RFCOMM ver 1.8
- [EMAIL PROTECTED]:/var/log$ 
- 
- 
- [EMAIL PROTECTED]:/var/log$ cat /proc/interrupts
-            CPU0       
-   0:     769244   IO-APIC-edge      timer
-   1:       3240   IO-APIC-edge      i8042
-   6:          5   IO-APIC-edge      floppy
-   7:          0   IO-APIC-edge      parport0
-   8:          3   IO-APIC-edge      rtc
-   9:          1   IO-APIC-fasteoi   acpi
-  12:     298607   IO-APIC-edge      i8042
-  14:     133069   IO-APIC-edge      libata
-  15:      47173   IO-APIC-edge      libata
-  17:     172397   IO-APIC-fasteoi   uhci_hcd:usb1, [EMAIL 
PROTECTED]:0000:01:00.0
-  18:          0   IO-APIC-fasteoi   uhci_hcd:usb2
-  19:      35258   IO-APIC-fasteoi   uhci_hcd:usb3, EMU10K1X
-  20:          0   IO-APIC-fasteoi   ehci_hcd:usb4
-  21:       4808   IO-APIC-fasteoi   eth0
-  22:      16816   IO-APIC-fasteoi   Intel 82801DB-ICH4
- NMI:          0 
- LOC:     769081 
- ERR:          0
- MIS:          0
- [EMAIL PROTECTED]:/var/log$ 
- 
- Hope this bug can be fixed soon or i am pointed in the right direction
- to reslove it.
- 
- Thanks

** Attachment added: "lots of information provided by richard"
   http://launchpadlibrarian.net/9444252/richard_attachment

-- 
xine was unable to initialize any audio drivers
https://bugs.launchpad.net/bugs/93979
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to