Schily wrote: > If you have problems with burning the data you should send the output > from cdrecord -v to allow to understand what happened. > I think we may need to move this new issue (bug?) elsewhere as the original bug appears to be resolved.
I plugged a Plextor firewire burner into my PPC Mac mini and the burn completed successfully. Is this a Matshita incompatibility problem? The Matshita is a common OEM drive in Macs. Thanks again! > [EMAIL PROTECTED]:/opt/schily/bin$ sudo ./cdrecord -v dev=0,0,0 -speed=4 > ~/dvd.iso > ./cdrecord: No write mode specified. > ./cdrecord: Asuming -sao mode. > ./cdrecord: If your drive does not accept -sao, try -tao. > ./cdrecord: Future versions of cdrecord may have different drive dependent > defaults. > Cdrecord-ProDVD-ProBD-Clone 2.01.01a35 (powerpc-unknown-linux-gnu) Copyright > (C) 1995-2007 J�rg Schilling > TOC Type: 1 = CD-ROM > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.5.27 > Using libscg version 'schily-0.9'. > SCSI buffer size: 64512 > atapi: 0 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'PLEXTOR ' > Identifikation : 'DVDR PX-708A2 ' > Revision : '1.03' > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. > Current: DVD+R > Profile: DVD+R (current) > Profile: DVD+RW > Profile: DVD-RW sequential recording > Profile: DVD-RW restricted overwrite > Profile: DVD-R sequential recording > Profile: DVD-ROM > Profile: CD-RW > Profile: CD-R > Profile: CD-ROM > Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr). > Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE > Supported modes: PACKET SAO > Drive buf size : 6684672 = 6528 KB > Drive pbuf size: 8388608 = 8192 KB > Drive DMA Speed: 18753 kB/s 106x CD 13x DVD 4x BD > FIFO size : 4194304 = 4096 KB > Track 01: data 4479 MB > Total size: 4479 MB = 2293754 sectors > Current Secsize: 2048 > Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 1350 > Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... input buffer ready. > Starting new track at sector: 0 > Track 01: 4479 of 4479 MB written (fifo 100%) [buf 98%] 4.2x. > Track 01: Total bytes read/written: 4697608192/4697608192 (2293754 sectors). > Writing time: 860.134s > Average write speed 3.9x. > Min drive buffer fill was 97% > Fixating... > Fixating time: 25.167s > ./cdrecord: fifo had 73993 puts and 73993 gets. > ./cdrecord: fifo was 0 times empty and 34413 times full, min fill was 59%. -- mkisofs can't handle files over 2^32 bytes https://bugs.launchpad.net/bugs/30033 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
