[Bug 1436269] Re: When you select Analog Output or Speakers as port in Output Devices tab of pavucontrol, headphone levels are raised

[Raymond]

first you have to fix pcm playback volume in line out jack


Node 0x05 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
  Control: name="PCM Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="PCM Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Line Out Jack", index=0, device=0
  Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x2f 0x2f]
  Pincap 0x00000017: OUT Detect Trigger ImpSense
  Pin Default 0x01014010: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=02, enabled=1
  Connection: 2
     0x03* 0x0e


pulseaudio need to use line out jack to determine the availability instead of 
unknown


analog-output: Analog Output (priority 9900, latency offset 0 usec, available: 
unknown)
                        properties:

        active profile: <output:analog-stereo+input:analog-stereo>
        sinks:
                alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio 
Analog Stereo
        sources:
                alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor 
of Built-in Audio Analog Stereo
                alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio 
Analog Stereo
        ports:
                analog-input-microphone: Microphone (priority 8700, latency 
offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-linein: Line In (priority 8100, latency offset 0 
usec, available: no)
                        properties:
                                
                analog-output: Analog Output (priority 9900, latency offset 0 
usec, available: unknown)
                        properties:
                                
                analog-output-speaker: Speakers (priority 10000, latency offset 
0 usec, available: no)
                        properties:
                                device.icon_name = "audio-speakers"
                analog-output-headphones: Headphones (priority 9000, latency 
offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "audio-headphones"


** Changed in: pulseaudio (Ubuntu)
       Status: New => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1436269

Title:
  When you select Analog Output or Speakers as port in Output Devices
  tab of pavucontrol, headphone levels are raised

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1436269/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs