** Description changed:

  Feisty 20070415 CD Live "can't access tty" will not boot.
  
  Dapper's running great on same system, 1280x960 LCD, Intel 82845G
  graphics so I didn't understand the "tty" failure.
  
  Tried booting a bunch of times chasing around mulititude of boot options and 
got dozens of screenfulls of errors.  Most significant:
  "...device sda Write cache enabled Read cache enabled doesn't support DPO or 
FUA."  No idea what that means.
  More tweaking on boot commands see lots of "sector errors".  Looks bad.
  Finally saw a "fsck failed, see /var/log/checkfs" buried in the middle of the 
messages that roar up the screen. When the messages stop there's not much 
running so I can't look at or save anything with anything I tried.
  
  The hard drive is  an IDE, WDC AC143006.  I disconnected it and Feisty
  booted right up, no hard drive installed on the computer.  If I'm
  running CD Live, it would be nice to get an "fsck fail" message and boot
  on up so I could look at it.  Evidently Feisty CD Live won't run if it
  has errors with the hard drive, which obviously it doesn't even need
  since it will run without it.
  
  Whatever code Feisty is using to support this IDE drive doesn't work.  I
  plugged the hard drive back in and Dapper booted right up beautifully,
  and Feisty boot still fails.  Any chance of a package to put hard drive
  IDE code into Feisty instead of SATA?  Otherwise this system's staying
  with Dapper.  (Runs great, by the way!).
  
  The error message is misleading: from the "can't access tty" I was
  chasing screen drivers and graphics modes.  If the error had been
  reported as "fsck error" in the first place it would be more to the
  point.
  
- So there are three Feisty CD Live bugs here: 
+ So there are three Feisty CD Live bugs here:
  1.  Feisty won't boot with a hard drive that runs fine on Dapper.
  2.  Feisty error message is misleading pointing to tty instead of hard drive.
  3.  Feisty boot failed on hardware it didn't need to run.
  
  Cheers, Jerry

-- 
Feisty boot fail "can't access tty" IDE SATA problem
https://bugs.launchpad.net/bugs/106864
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to