Public bug reported: I have an Intel D201GLY motherboard with on-board sound running Ubuntu 7.04 Feisty. The sound components are identified as SI7012 with an Analog Devices AD1888 chip. The sound components appear to recognized by the OS, and it acts like all is well, but no sound ever comes out the speakers no matter with "speaker-test", "xmms", "rhythmbox", or whatever.
I have run every combination of "alsamixer" settings, done everything outlined on: http://ubuntuforums.org/showthread.php?t=205449 and tried all of the "options" that I could find for the snd-intel8x0 driver in /etc/modprobe.d/alsa-base. I have tried multiple speakers, headphones, etc., and I am very sure that the sound is not muted or volume turned down in alsamixer and also the GUI Volume Control. The output from the various commands follows: ============================================ CONFIGURATION: OS: Ubuntu 7.04 Fiesty Fawn Motherboard: Intel D201GLY with 1Gb memory Kernel: 2.6.20-16-generic Synaptic says: alsa-base Version 1.0.13-3ubuntu1 is installed uname -r reports: 2.6.20-16-generic ============================================ No sound output from Speaker Test: speaker-test -Dplug:surround51 -c6 -twav ============================================ aplay -l says: card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012] Subdevices: 1/1 Subdevice #0: subdevice #0 ============================================ lspci -v says: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) Subsystem: Intel Corporation Unknown device d61f Flags: bus master, medium devsel, latency 32, IRQ 21 I/O ports at 2100 [size=256] I/O ports at 2200 [size=128] Capabilities: <access denied> ============================================ lsmod | grep snd says: snd_intel8x0 34332 1 snd_ac97_codec 98464 1 snd_intel8x0 ac97_bus 3200 1 snd_ac97_codec snd_pcm_oss 44544 0 snd_mixer_oss 17408 1 snd_pcm_oss snd_pcm 79876 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 4740 0 snd_seq_oss 32896 0 snd_seq_midi 9600 0 snd_rawmidi 25472 1 snd_seq_midi snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 23684 2 snd_pcm,snd_seq snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 54020 12 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8672 1 snd snd_page_alloc 10888 2 snd_intel8x0,snd_pcm ============================================ cat /dev/sndstat says: Sound Driver:3.8.1a-980706 (ALSA v1.0.14rc1 emulation code) Kernel: Linux tweety 2.6.20-16-generic #2 SMP Fri Aug 31 00:55:27 UTC 2007 i686 Config options: 0 Installed drivers: Type 10: ALSA emulation Card config: SiS SI7012 with AD1888 at 0x2100, irq 21 Audio devices: 0: SiS SI7012 (DUPLEX) Synth devices: NOT ENABLED IN CONFIG Midi devices: NOT ENABLED IN CONFIG Timers: 31: system timer Mixers: 0: Analog Devices AD1888 ============================================ cat /proc/asound/cards says: 0 [SI7012 ]: ICH - SiS SI7012 SiS SI7012 with AD1888 at 0x2100, irq 21 ============================================ asoundconf list says: Names of available sound cards: SI7012 ============================================ dmesg reports: [ 0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007 (Ubuntu 2.6.20-16.31-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003d049000 end: 000000003d149000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003d149000 size: 0000000000101000 end: 000000003d24a000 type: 4 [ 0.000000] copy_e820_map() start: 000000003d24a000 size: 0000000000bab000 end: 000000003ddf5000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003ddf5000 size: 0000000000002000 end: 000000003ddf7000 type: 2 [ 0.000000] copy_e820_map() start: 000000003ddf7000 size: 0000000000085000 end: 000000003de7c000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003de7c000 size: 000000000007c000 end: 000000003def8000 type: 4 [ 0.000000] copy_e820_map() start: 000000003def8000 size: 0000000000001000 end: 000000003def9000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003def9000 size: 0000000000006000 end: 000000003deff000 type: 3 [ 0.000000] copy_e820_map() start: 000000003deff000 size: 0000000000001000 end: 000000003df00000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003d149000 (usable) [ 0.000000] BIOS-e820: 000000003d149000 - 000000003d24a000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003d24a000 - 000000003ddf5000 (usable) [ 0.000000] BIOS-e820: 000000003ddf5000 - 000000003ddf7000 (reserved) [ 0.000000] BIOS-e820: 000000003ddf7000 - 000000003de7c000 (usable) [ 0.000000] BIOS-e820: 000000003de7c000 - 000000003def8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003def8000 - 000000003def9000 (usable) [ 0.000000] BIOS-e820: 000000003def9000 - 000000003deff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003deff000 - 000000003df00000 (usable) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 95MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000fe200 [ 0.000000] Entering add_active_range(0, 0, 253696) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 253696 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 253696 [ 0.000000] On node 0 totalpages: 253696 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 190 pages used for memmap [ 0.000000] HighMem zone: 24130 pages, LIFO batch:3 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v000 INTEL ) @ 0x000fe020 [ 0.000000] ACPI: RSDT (v001 INTEL DG965CO 0x0000004a 0x01000013) @ 0x3defe038 [ 0.000000] ACPI: FADT (v001 INTEL DG965CO 0x0000004a MSFT 0x01000013) @ 0x3defd000 [ 0.000000] ACPI: MADT (v001 INTEL DG965CO 0x0000004a MSFT 0x01000013) @ 0x3def9000 [ 0.000000] ACPI: DSDT (v001 INTEL DG965CO 0x0000004a MSFT 0x01000013) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3df00000:c2080000) [ 0.000000] Detected 1333.408 MHz processor. [ 20.146772] Built 1 zonelists. Total pages: 251714 [ 20.146778] Kernel command line: root=UUID=6b161e94-d2f6-4af4-a8c3-2d9e1c07be43 ro quiet splash [ 20.146984] mapped APIC to ffffd000 (fee00000) [ 20.146987] mapped IOAPIC to ffffc000 (fec00000) [ 20.146991] Enabling fast FPU save and restore... done. [ 20.146994] Enabling unmasked SIMD FPU exception support... done. [ 20.147005] Initializing CPU#0 [ 20.147071] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 20.148156] Console: colour VGA+ 80x25 [ 20.148599] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 20.149207] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 20.185293] Memory: 993384k/1014784k available (1993k kernel code, 19216k reserved, 900k data, 328k init, 95724k highmem) [ 20.185305] virtual kernel memory layout: [ 20.185307] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 20.185309] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 20.185310] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 20.185312] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 20.185314] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) [ 20.185315] .data : 0xc02f2434 - 0xc03d36d4 ( 900 kB) [ 20.185317] .text : 0xc0100000 - 0xc02f2434 (1993 kB) [ 20.185321] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 20.262935] Calibrating delay using timer specific routine.. 2668.55 BogoMIPS (lpj=5337104) [ 20.262992] Security Framework v1.0.0 initialized [ 20.263005] SELinux: Disabled at boot. [ 20.263027] Mount-cache hash table entries: 512 [ 20.263228] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000 [ 20.263241] monitor/mwait feature present. [ 20.263244] using mwait in idle threads. [ 20.263250] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.263253] CPU: L2 cache: 512K [ 20.263257] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002940 0000c109 00000000 00000000 [ 20.263272] Compat vDSO mapped to ffffe000. [ 20.263278] Remapping vsyscall page to ffffe000 [ 20.263296] Checking 'hlt' instruction... OK. [ 20.279069] SMP alternatives: switching to UP code [ 20.279363] Freeing SMP alternatives: 11k freed [ 20.279620] Early unpacking initramfs... done [ 20.699792] ACPI: Core revision 20060707 [ 20.701240] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 20.716360] CPU0: Intel(R) Celeron(R) CPU 215 @ 1.33GHz stepping 08 [ 20.716388] Total of 1 processors activated (2668.55 BogoMIPS). [ 20.716489] ENABLING IO-APIC IRQs [ 20.716674] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 20.862262] Brought up 1 CPUs [ 20.862559] Booting paravirtualized kernel on bare hardware [ 20.862652] Time: 21:26:40 Date: 08/04/107 [ 20.862690] NET: Registered protocol family 16 [ 20.862810] EISA bus registered [ 20.862817] ACPI: bus type pci registered [ 20.865578] PCI: Using configuration type 1 [ 20.865580] Setting up standard PCI resources [ 20.888699] ACPI: Interpreter enabled [ 20.888704] ACPI: Using IOAPIC for interrupt routing [ 20.890001] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.890014] PCI: Probing PCI hardware (bus 00) [ 20.890971] Boot video device is 0000:01:00.0 [ 20.891139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.903449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 20.904006] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) [ 20.904274] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 20.904540] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15) [ 20.904808] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15) [ 20.905078] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15) [ 20.905342] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15) [ 20.905607] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) [ 20.905920] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15) [ 20.906057] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.906080] pnp: PnP ACPI init [ 20.908679] pnp: PnP ACPI: found 11 devices [ 20.908685] PnPBIOS: Disabled by ACPI PNP [ 20.908757] PCI: Using ACPI for IRQ routing [ 20.908761] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.908847] NET: Registered protocol family 8 [ 20.908850] NET: Registered protocol family 20 [ 20.909060] pnp: 00:08: ioport range 0x800-0x8fe could not be reserved [ 20.909465] PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 [ 20.909469] PCI: Bridge: 0000:00:01.0 [ 20.909472] IO window: 1000-1fff [ 20.909478] MEM window: fa000000-fa0fffff [ 20.909484] PREFETCH window: f0000000-f7ffffff [ 20.909490] PCI: Bridge: 0000:00:1f.0 [ 20.909492] IO window: disabled. [ 20.909498] MEM window: fa200000-fa2fffff [ 20.909503] PREFETCH window: disabled. [ 20.909518] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 20.909539] PCI: Enabling device 0000:00:1f.0 (0000 -> 0002) [ 20.909547] PCI: Setting latency timer of device 0000:00:1f.0 to 64 [ 20.909581] NET: Registered protocol family 2 [ 20.946204] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 20.946364] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 20.947690] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 20.948453] TCP: Hash tables configured (established 131072 bind 65536) [ 20.948460] TCP reno registered [ 20.958305] checking if image is initramfs... it is [ 21.790722] Freeing initrd memory: 6780k freed [ 21.791419] audit: initializing netlink socket (disabled) [ 21.791438] audit(1188941200.716:1): initialized [ 21.791527] highmem bounce pool size: 64 pages [ 21.791612] VFS: Disk quotas dquot_6.5.1 [ 21.791639] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.791706] io scheduler noop registered [ 21.791710] io scheduler anticipatory registered [ 21.791713] io scheduler deadline registered [ 21.791725] io scheduler cfq registered (default) [ 21.791935] PCI: Setting latency timer of device 0000:00:1f.0 to 64 [ 21.791987] assign_interrupt_mode Found MSI capability [ 21.791991] Allocate Port Service[0000:00:1f.0:pcie00] [ 21.792196] isapnp: Scanning for PnP cards... [ 22.145637] isapnp: No Plug & Play device found [ 22.205913] Real Time Clock Driver v1.12ac [ 22.205976] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.206352] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 22.207552] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 22.207928] mice: PS/2 mouse device common for all mice [ 22.208723] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.209043] input: Macintosh mouse button emulation as /class/input/input0 [ 22.209089] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 22.209095] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 22.209370] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 22.212192] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.212199] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.212383] EISA: Probing bus 0 at eisa.0 [ 22.212396] Cannot allocate resource for EISA slot 1 [ 22.212399] Cannot allocate resource for EISA slot 2 [ 22.212425] EISA: Detected 0 cards. [ 22.242508] TCP cubic registered [ 22.242518] NET: Registered protocol family 1 [ 22.242548] Using IPI No-Shortcut mode [ 22.242641] ACPI: (supports S0 S1 S4 S5) [ 22.242695] Magic number: 7:919:448 [ 22.243038] Freeing unused kernel memory: 328k freed [ 22.244541] Time: tsc clocksource has been installed. [ 22.256886] input: AT Translated Set 2 keyboard as /class/input/input1 [ 23.543653] Capability LSM initialized [ 23.595821] ACPI: Processor [CPU0] (supports 8 throttling states) [ 23.595833] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 23.595841] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 23.595851] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 24.236502] SCSI subsystem initialized [ 24.243444] libata version 2.20 loaded. [ 24.245374] pata_sis 0000:00:02.5: version 0.5.1 [ 24.245494] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012280 irq 14 [ 24.245525] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012288 irq 15 [ 24.245546] scsi0 : pata_sis [ 24.284467] usbcore: registered new interface driver usbfs [ 24.284501] usbcore: registered new interface driver hub [ 24.284534] usbcore: registered new device driver usb [ 24.355821] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 24.378939] sis900.c: v1.08.10 Apr. 2 2006 [ 24.445451] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 [ 24.445458] ata1.00: ATA-7: ST3120814A, 3.AAE, max UDMA/100 [ 24.445462] ata1.00: 234441648 sectors, multi 16: LBA48 [ 24.511901] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648 [ 24.511911] ata1.00: configured for UDMA/100 [ 24.513430] scsi1 : pata_sis [ 24.665911] scsi 0:0:0:0: Direct-Access ATA ST3120814A 3.AA PQ: 0 ANSI: 5 [ 24.670854] PCI: Enabling device 0000:00:03.0 (0100 -> 0102) [ 24.670872] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 24.670893] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 24.671081] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 24.671105] ohci_hcd 0000:00:03.0: irq 16, io mem 0xfa104000 [ 24.727766] usb usb1: configuration #1 chosen from 1 choice [ 24.727803] hub 1-0:1.0: USB hub found [ 24.727815] hub 1-0:1.0: 3 ports detected [ 24.829639] PCI: Enabling device 0000:00:03.1 (0100 -> 0102) [ 24.829655] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17 [ 24.829678] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 24.829707] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 24.829731] ohci_hcd 0000:00:03.1: irq 17, io mem 0xfa103000 [ 24.887556] usb usb2: configuration #1 chosen from 1 choice [ 24.887593] hub 2-0:1.0: USB hub found [ 24.887605] hub 2-0:1.0: 3 ports detected [ 24.989454] PCI: Enabling device 0000:00:03.2 (0100 -> 0102) [ 24.989470] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 18 [ 24.989493] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 24.989524] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 24.989545] ohci_hcd 0000:00:03.2: irq 18, io mem 0xfa102000 [ 25.047356] usb usb3: configuration #1 chosen from 1 choice [ 25.047392] hub 3-0:1.0: USB hub found [ 25.047403] hub 3-0:1.0: 2 ports detected [ 25.149400] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 25.150721] 0000:00:04.0: SiS 900 on Foxconn 661 7MI transceiver found at address 1. [ 25.161438] 0000:00:04.0: Using transceiver found at address 1 as default [ 25.162755] eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 19, 00:19:d1:82:a6:b9. [ 25.163158] PCI: Enabling device 0000:00:03.3 (0100 -> 0102) [ 25.163169] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 20 [ 25.163188] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 25.163242] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 [ 25.163292] ehci_hcd 0000:00:03.3: irq 20, io mem 0xfa101000 [ 25.163302] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.163404] usb usb4: configuration #1 chosen from 1 choice [ 25.163443] hub 4-0:1.0: USB hub found [ 25.163451] hub 4-0:1.0: 8 ports detected [ 25.278586] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [ 25.278617] sda: Write Protect is off [ 25.278620] sda: Mode Sense: 00 3a 00 00 [ 25.278637] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.278716] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [ 25.278726] sda: Write Protect is off [ 25.278729] sda: Mode Sense: 00 3a 00 00 [ 25.278744] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.278748] sda: sda1 sda2 < sda5 > [ 25.322196] sd 0:0:0:0: Attached scsi disk sda [ 25.328630] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.538637] Attempting manual resume [ 25.538643] swsusp: Resume From Partition 8:5 [ 25.538645] PM: Checking swsusp image. [ 25.538852] PM: Resume from disk failed. [ 25.592187] kjournald starting. Commit interval 5 seconds [ 25.592204] EXT3-fs: mounted filesystem with ordered data mode. [ 34.817084] NET: Registered protocol family 17 [ 35.429526] eth0: Media Link On 100mbps full-duplex [ 35.591408] Linux agpgart interface v0.102 (c) Dave Jones [ 35.599265] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.601578] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.857268] input: PC Speaker as /class/input/input2 [ 36.054810] agpgart: Unsupported SiS chipset (device id: 0662) [ 36.103486] parport: PnPBIOS parport detected. [ 36.103540] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 36.545683] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 21 [ 36.749051] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 [ 36.903074] AC'97 0 analog subsections not ready [ 36.967000] intel8x0_measure_ac97_clock: measured 52664 usecs [ 36.967004] intel8x0: clocking to 48000 [ 37.131850] fuse init (API version 7.8) [ 37.165054] lp0: using parport0 (interrupt-driven). [ 37.204438] Adding 2923788k swap on /dev/disk/by-uuid/ea283df5-bb29-4f89-a97c-2baca38a4f45. Priority:-1 extents:1 across:2923788k [ 37.336884] EXT3 FS on sda1, internal journal [ 37.642850] NET: Registered protocol family 10 [ 37.642967] lo: Disabled Privacy Extensions [ 43.126092] ibm_acpi: ec object not found [ 43.190961] No dock devices found. [ 43.207988] Using specific hotkey driver [ 43.410180] input: Power Button (FF) as /class/input/input4 [ 43.415264] ACPI: Power Button (FF) [PWRF] [ 43.456769] input: Power Button (CM) as /class/input/input5 [ 43.461797] ACPI: Power Button (CM) [PWRB] [ 43.568881] pcc_acpi: loading... [ 48.493607] ppdev: user-space parallel port driver [ 49.273899] apm: BIOS not found. [ 49.473377] Bluetooth: Core ver 2.11 [ 49.474110] NET: Registered protocol family 31 [ 49.474116] Bluetooth: HCI device and connection manager initialized [ 49.474121] Bluetooth: HCI socket layer initialized [ 49.522261] Bluetooth: L2CAP ver 2.8 [ 49.522267] Bluetooth: L2CAP socket layer initialized [ 49.890475] Bluetooth: RFCOMM socket layer initialized [ 49.890586] Bluetooth: RFCOMM TTY layer initialized [ 49.890589] Bluetooth: RFCOMM ver 1.8 [ 65.357117] eth0: no IPv6 routers present ============================================== Whew, I'm sorry if I have overdone what I sent you; I have never entered a bug report before. Thanks, Steve O'Brien [EMAIL PROTECTED] ** Affects: ubuntu Importance: Undecided Status: New -- No Sound from onboard Analog Devices AD1888 SI7012 https://bugs.launchpad.net/bugs/137389 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
