Public bug reported:
Binary package hint: dmraid
I have an Asus m2n-sli motherboard with nvidia raid chipset. I have
setup my 2 seagate harddrives to mirror in the raid setup. I am
dualbooting between windows xp and feisty. I installed successfully
using the fakeraid howto. Here are some outputs of commands to get an
idea of my layout.
[EMAIL PROTECTED]:~# dmraid -s
*** Active Set
name : nvidia_ajafeffc
size : 625142400
stride : 128
type : mirror
status : ok
subsets: 0
devs : 2
spares : 0
[EMAIL PROTECTED]:~# dmraid -l
asr : Adaptec HostRAID ASR (0,1,10)
ddf1 : SNIA DDF1 (0,1,4,5,linear)
hpt37x : Highpoint HPT37X (S,0,1,10,01)
hpt45x : Highpoint HPT45X (S,0,1,10)
isw : Intel Software RAID (0,1)
jmicron : JMicron ATARAID (S,0,1)
lsi : LSI Logic MegaRAID (0,1,10)
nvidia : NVidia RAID (S,0,1,10,5)
pdc : Promise FastTrack (S,0,1,10)
sil : Silicon Image(tm) Medley(tm) (0,1,10)
via : VIA Software RAID (S,0,1,10)
dos : DOS partitions on SW RAIDs
[EMAIL PROTECTED]:~# fdisk -l /dev/mapper/nvidia_ajafeffc
Disk /dev/mapper/nvidia_ajafeffc: 320.0 GB, 320072932352 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id
System
/dev/mapper/nvidia_ajafeffc1 * 1 5099 40957686 7
HPFS/NTFS
/dev/mapper/nvidia_ajafeffc2 5100 9969 39118275 8e
Linux LVM
/dev/mapper/nvidia_ajafeffc3 9970 9982 97656+ 83 Linux
/dev/mapper/nvidia_ajafeffc4 9983 38913 232388257+ 7
HPFS/NTFS
[EMAIL PROTECTED]:~# fdisk -l /dev/sda
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 5099 40957686 7 HPFS/NTFS
/dev/sda2 5100 9969 39118275 8e Linux LVM
/dev/sda3 9970 9982 97656+ 83 Linux
/dev/sda4 9983 38913 232388257+ 7 HPFS/NTFS
[EMAIL PROTECTED]:~# fdisk -l /dev/sdb
Disk /dev/sdb: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 5099 40957686 7 HPFS/NTFS
/dev/sdb2 5100 9969 39118275 8e Linux LVM
/dev/sdb3 9970 9982 97656+ 83 Linux
/dev/sdb4 9983 38913 232388257+ 7 HPFS/NTFS
[EMAIL PROTECTED]:~# cat /etc/fstab
# UNCONFIGURED FSTAB FOR BASE SYSTEM
proc /proc proc rw 0 0
/dev/volgroup/root / ext3 defaults,errors=remount-ro 0 1
/dev/volgroup/swap none swap sw 0 0
/dev/mapper/nvidia_ajafeffc3 /boot ext3 defaults 0 2
/dev/mapper/nvidia_ajafeffc4 /media/storage ntfs-3g defaults 0 0
[EMAIL PROTECTED]:~# dmraid -ay
RAID set "nvidia_ajafeffc" already active
ERROR: opening "/dev/.static/dev/mapper/nvidia_ajafeffc"
output of revelant menu.lst from grub
title Ubuntu, kernel 2.6.20-16-generic
root (hd0,2)
kernel /vmlinuz-2.6.20-16-generic root=/dev/mapper/volgroup-root ro
quiet splash
initrd /initrd.img-2.6.20-16-generic
title Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root (hd0,2)
kernel /vmlinuz-2.6.20-16-generic root=/dev/mapper/volgroup-root ro
single
initrd /initrd.img-2.6.20-16-generic
title Ubuntu, memtest86+
root (hd0,2)
kernel /memtest86+.bin
title Windows XP
rootnoverify (hd0,0)
chainloader +1
[EMAIL PROTECTED]:~# lvdisplay
--- Logical volume ---
LV Name /dev/volgroup/root
VG Name volgroup
LV UUID 6NjirO-b8ap-Dgqp-9LlS-zIuZ-jB0W-UgjoAc
LV Write Access read/write
LV Status available
# open 1
LV Size 36.43 GB
Current LE 9325
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:0
--- Logical volume ---
LV Name /dev/volgroup/swap
VG Name volgroup
LV UUID fg5ubR-Okhe-6Ezy-sNx2-JwOd-pYpY-hPXC4Q
LV Write Access read/write
LV Status available
# open 1
LV Size 900.00 MB
Current LE 225
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:1
[EMAIL PROTECTED]:~# pvdisplay
--- Physical volume ---
PV Name /dev/mapper/nvidia_ajafeffc2
VG Name volgroup
PV Size 37.30 GB / not usable 0
Allocatable yes (but full)
PE Size (KByte) 4096
Total PE 9550
Free PE 0
Allocated PE 9550
PV UUID eonDPR-9lMv-88T5-v92e-gOh7-eL40-obvWBz
And now for a description of the bug. After I did my install. I
rebooted off the livecd and went about installing all my applications,
configuring my settings ,etc. Rebooted a couple of times and everything
was fine. Then I rebooted once and all of a sudden I'm booted into the
same environment I was in post install and none of my files are there?
I'm confused as to what could have happened. I reboot again and I boot
back into my setup that I previously had. Right now it's 50/50 as to
which installation I will boot to when I reboot. I am at a loss for how
this is occuring. Windows is behaving properly in the mirror, and all
the commands seem to point to the mirror working in linux yet it seems
that there are 2 seperate installs and no mirroring taking place.
Please let me know if you need any clarification or any more output from
commands. I am at a loss for how this is occuring.
** Affects: dmraid (Ubuntu)
Importance: Undecided
Status: New
--
dmraid says mirroring but isn't
https://bugs.launchpad.net/bugs/129285
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
