When I upgraded from 6.06 to 7.04, I'm having errors burning CDRs. The hardware hasn't changed at all between version upgrades, so I don't think hardware is the issue. At first I thought it might be wodim, since that's replaced cdrecord. However, I switched to cdrdao and am still having problems.
===== Error report from K3b using cdrdao ===== System ----------------------- K3b Version: 1.0 KDE Version: 3.5.6 QT Version: 3.3.7 Kernel: 2.6.20-16-generic Devices ----------------------- ATAPI CD-RW 48X24 D.LC (/dev/hdc, ) [CD-R, CD-RW, CD-ROM] [CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R] BENQ DVD LS DW1655 BCDB (/dev/hdd, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R16, RAW/R96R, Restricted Overwrite, Layer Jump] Used versions ----------------------- cdrdao: 1.2.2 cdrdao: 1.2.2 cdrdao ----------------------- Cdrdao version 1.2.2 - (C) Andreas Mueller <[EMAIL PROTECTED]> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'ubuntu-0.8ubuntu1' /dev/hdd: BENQ DVD LS DW1655 Rev: BCDB Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010) Starting write at speed 48... Process can be aborted with QUIT signal (usually CTRL-\). WARNING: No super user permission to setup real time scheduling. Turning BURN-Proof on Executing power calibration... Power calibration successful. Writing track 01 (mode MODE1/MODE1 )... Wrote 1 of 757 MB (Buffers 100% 96%). Wrote 2 of 757 MB (Buffers 100% 90%). Wrote 3 of 757 MB (Buffers 100% 93%). Wrote 4 of 757 MB (Buffers 100% 88%). Wrote 5 of 757 MB (Buffers 100% 91%). Wrote 6 of 757 MB (Buffers 100% 95%). <cut out unnecessary lines> Wrote 751 of 757 MB (Buffers 100% 96%). Wrote 752 of 757 MB (Buffers 100% 90%). Wrote 753 of 757 MB (Buffers 100% 94%). Wrote 754 of 757 MB (Buffers 100% 88%). Wrote 755 of 757 MB (Buffers 100% 95%). Wrote 756 of 757 MB (Buffers 100% 90%). Wrote 757 of 757 MB (Buffers 100% 93%). Wrote 337802 blocks. Buffer fill min 90%/max 100%. Flushing cache... Writing finished successfully. Cdrdao version 1.2.2 - (C) Andreas Mueller <[EMAIL PROTECTED]> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'ubuntu-0.8ubuntu1' /dev/hdd: BENQ DVD LS DW1655 Rev: BCDB Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010) Starting write at speed 48... Process can be aborted with QUIT signal (usually CTRL-\). WARNING: No super user permission to setup real time scheduling. Turning BURN-Proof on Executing power calibration... Power calibration successful. Writing track 01 (mode MODE1/MODE1 )... Wrote 1 of 757 MB (Buffers 100% 96%). Wrote 2 of 757 MB (Buffers 100% 90%). Wrote 3 of 757 MB (Buffers 100% 93%). Wrote 4 of 757 MB (Buffers 90% 88%). Wrote 5 of 757 MB (Buffers 93% 70%). Wrote 6 of 757 MB (Buffers 100% 83%). Wrote 7 of 757 MB (Buffers 100% 95%). Wrote 8 of 757 MB (Buffers 100% 90%). Wrote 9 of 757 MB (Buffers 100% 93%). Wrote 10 of 757 MB (Buffers 100% 96%). Wrote 11 of 757 MB (Buffers 100% 82%). Wrote 12 of 757 MB (Buffers 100% 85%). Wrote 13 of 757 MB (Buffers 100% 88%). Wrote 14 of 757 MB (Buffers 100% 92%). Wrote 15 of 757 MB (Buffers 100% 95%). Wrote 16 of 757 MB (Buffers 100% 90%). Wrote 17 of 757 MB (Buffers 93% 93%). Wrote 18 of 757 MB (Buffers 100% 87%). Wrote 19 of 757 MB (Buffers 100% 91%). /usr/bin/cdrdao: Success. : scsi sendcmd: no error CDB: 2A 00 00 00 21 66 00 00 1A 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 00 00 00 00 12 00 00 00 00 0C 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 53248 cmd finished after 3.902s timeout 180s ERROR: Write data failed. ERROR: Writing failed - buffer under run? ERROR: Writing failed. cdrdao command: ----------------------- /usr/bin/cdrdao write --device /dev/hdd --driver generic-mmc:0x00000010 --speed 48 -n -v 2 --force --eject --remote 18 /tmp/kde-mark/k3br5BBybtoc /usr/bin/cdrdao write --device /dev/hdd --driver generic-mmc:0x00000010 --speed 48 -n -v 2 --force --eject --remote 15 /tmp/kde-mark/k3baTcajctoc ==== Error in K3b using wodim ==== System ----------------------- K3b Version: 1.0 KDE Version: 3.5.6 QT Version: 3.3.7 Kernel: 2.6.20-16-generic Devices ----------------------- ATAPI CD-RW 48X24 D.LC (/dev/hdc, ) [CD-R, CD-RW, CD-ROM] [CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R] BENQ DVD LS DW1655 BCDB (/dev/hdd, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R16, RAW/R96R, Restricted Overwrite, Layer Jump] Used versions ----------------------- cdrecord: 1.1.2 cdrecord ----------------------- scsidev: '/dev/hdd' devname: '/dev/hdd' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.2 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'BENQ ' Identification : 'DVD LS DW1655 ' Revision : 'BCDB' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) Profile: 0xFFFF () Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R Drive buf size : 1073152 = 1048 KB FIFO size : 12582912 = 12288 KB Speed set to 8467 KB/s Track 01: data 659 MB Total size: 757 MB (75:04.02) = 337802 sectors Lout start: 758 MB (75:06/02) = 337802 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359846 Blocks current: 359846 Blocks remaining: 22044 Starting to write CD/DVD at speed 48.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Errno: 0 (Success), read track info scsi sendcmd: no error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 28 cmd finished after 0.002s timeout 240s /usr/bin/wodim: Cannot get next writable address for 'invisible' track. /usr/bin/wodim: This means that we are checking recorded media. /usr/bin/wodim: This media cannot be written in streaming mode anymore. /usr/bin/wodim: If you like to write to 'preformatted' RW media, try to blank the media first. Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 659 MB written. Track 01: 1 of 659 MB written (fifo 100%) [buf 92%] 26.2x. Track 01: 2 of 659 MB written (fifo 100%) [buf 92%] 21.3x. Track 01: 3 of 659 MB written (fifo 99%) [buf 95%] 22.6x. Track 01: 4 of 659 MB written (fifo 98%) [buf 95%] 14.0x. Track 01: 5 of 659 MB written (fifo 99%) [buf 95%] 21.0x. Track 01: 6 of 659 MB written (fifo 100%) [buf 85%] 19.7x. Track 01: 7 of 659 MB written (fifo 100%) [buf 88%] 14.4x. Track 01: 8 of 659 MB written (fifo 100%) [buf 88%] 21.2x. Track 01: 9 of 659 MB written (fifo 100%) [buf 91%] 23.5x. Track 01: 10 of 659 MB written (fifo 100%) [buf 91%] 21.7x. Track 01: 11 of 659 MB written (fifo 99%) [buf 94%] 23.0x. Track 01: 12 of 659 MB written (fifo 99%) [buf 94%] 21.6x. Track 01: 13 of 659 MB written (fifo 100%) [buf 88%] 21.5x. Track 01: 14 of 659 MB written (fifo 100%) [buf 87%] 21.8x. Track 01: 15 of 659 MB written (fifo 100%) [buf 91%] 23.4x. Errno: 0 (Success), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 1E 84 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 00 00 00 00 12 00 00 00 00 0C 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 7.276s timeout 200s /usr/bin/wodim: A write error occured. /usr/bin/wodim: Please properly read the error message above. write track data: error after 15998976 bytes Writing time: 25.335s Average write speed 248.6x. Min drive buffer fill was 85% Fixating... Fixating time: 0.006s cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/hdd speed=48 -dao driveropts=burnfree -eject -data -tsize=337802s - -- Burner not working in 7,04 https://bugs.launchpad.net/bugs/114122 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
