@hanynowsky:
I 've been looking at both logs from you, the one from 0.5 and the one
from 0.6, and the main difference I find is just in the APN being used
to connect. With MM 0.5 you're using:
debug_log(): (ttyUSB0): --> 'ATD*99***1#<CR>'
debug_log(): (ttyUSB0): <-- '<CR><LF>CONNECT 7200000<CR><LF>'
mm_port_set_connected(): (ttyUSB0): port now connected
CID '1' corresponds to the "internet1.meditel.ma" APN.
While in the failing MM 0.6 you're using:
debug_log(): (ttyUSB0): --> 'ATD*99***2#<CR>'
debug_log(): (ttyUSB0): <-- '<CR><LF>ERROR<CR><LF>'
CID '2' corresponds to the "internet2.meditel.ma" APN.
This info comes directly from the NM settings used. In the 0.5 case you used:
simple_connect(): (ttyUSB0): number => "*99#"
simple_connect(): (ttyUSB0): username => "MEDINET"
simple_connect(): (ttyUSB0): password => "MEDINET"
simple_connect(): (ttyUSB0): apn => "internet1.meditel.ma"
simple_connect(): (ttyUSB0): network_mode => 6
simple_connect(): (ttyUSB0): allowed_mode => 2
While in the failing 0.6 case you used:
simple_connect(): (ttyUSB0): number => "*99#"
simple_connect(): (ttyUSB0): username => "MEDINET"
simple_connect(): (ttyUSB0): password => "MEDINET"
simple_connect(): (ttyUSB0): apn => "internet2.meditel.ma"
simple_connect(): (ttyUSB0): network_mode => 0
simple_connect(): (ttyUSB0): allowed_mode => 0
In addition to these differences, I can see that in the MM06 run I get 4 ttyUSB
ports (ttyUSB0 to ttyUSB3), while in the MM05 run I only see 2 (ttyUSB0 and
ttyUSB1). This is very very weird, as it is the kernel the one making the ports
show up, not MM. So if the test is done in exactly the same setup just with 2
different MM versions, this should never happen.
More weird things: GETPORTMODE in MM 06 tells us that the PCUI port is
the one with usbif 2; and also it doesn't report any MDM (modem) port.
At the end it ends up being useless as of the 4 serial ports found only
one of them (ttyUSB0) responds to AT. A wrong ttyUSB port used is
probably not the issue here as in both runs ttyUSB0 is being used.
So, no clear idea the reason for the issue.
@hanynowsky or anyone else: can you run MM in debug mode in *exactly*
the same setup but just with different MM versions (0.5 and 0.6)?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1057186
Title:
Modem Huawei E173 works in 12.04 but not in 12.10
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1057186/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
