Alfredo J. Fabretti, thank you for reporting this and helping make Ubuntu better. Hardy desktop reached EOL on May 12, 2011. Please see this document for currently supported Ubuntu releases: https://wiki.ubuntu.com/Releases
We were wondering if this is still an issue on a supported release? If so, can you try with the latest development release of Ubuntu? ISO CD images are available from http://cdimage.ubuntu.com/releases/ . If it remains an issue, could you run the following command in a supported release from a Terminal (Applications->Accessories->Terminal). It will automatically gather and attach updated debug information to this report. apport-collect -p linux <replace-with-bug-number> Also, if you could test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the upstream kernel, please remove the 'needs-upstream- testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs-upstream-testing' text. Please let us know your results. Thanks in advance. ** Tags removed: 150 audio hauppauge ivtv ** Tags added: hardy kernel-sound needs-bisect needs-upstream-testing regression-release ** Description changed: - After upgrading from Gutsy to Hardy, my PVR 150 has no sound at all. Everything else seems to work OK (I have sound in KDE4, Gnome, mp3 with mplayer, video with mplayer, etc). + After upgrading from Gutsy to Hardy, my PVR 150 has no sound at all. Everything else seems to work OK (I have sound in KDE4, Gnome, mp3 with mplayer, video with mplayer, etc). I tried Mythtv, mplayer and output to a mpg (later reproduced with mplayer) and I can't hear any sound, so I think the problem could be in IVTV. DMESG output: [ 57.292983] ivtv: Start initialization, version 1.1.0 [ 57.293038] ivtv0: Initializing card #0 [ 57.293040] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 57.315388] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 57.395533] tveeprom 0-0050: Hauppauge model 26152, rev E5B2, serial# 10294928 [ 57.395536] tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50) [ 57.395538] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) [ 57.395540] tveeprom 0-0050: audio processor is CX25843 (idx 37) [ 57.395541] tveeprom 0-0050: decoder processor is CX25843 (idx 30) [ 57.395543] tveeprom 0-0050: has no radio, has IR receiver, has IR transmitter [ 57.395545] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 57.395546] ivtv0: Reopen i2c bus for IR-blaster support [ 57.486249] pwc: Philips webcam module version 10.0.13 loaded. [ 57.486252] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [ 57.486254] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [ 57.486255] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [ 57.486280] pwc: Logitech QuickCam Notebook Pro USB webcam detected. [ 57.486301] pwc: Registered as /dev/video0. [ 57.488589] usbcore: registered new interface driver Philips webcam [ 57.585086] Driver 'sr' needs updating - please use bus_type methods [ 57.597362] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 57.632823] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 57.632826] Uniform CD-ROM driver Revision: 3.20 [ 57.632869] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 57.919618] cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 57.965041] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 57.973787] tuner-simple 0-0061: type set to 50 (TCL 2002N) [ 57.973790] tuner 0-0061: type set to TCL 2002N [ 57.973985] ivtv0: Registered device video1 for encoder MPG (4096 kB) [ 57.973999] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 57.974012] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 57.974025] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 57.974027] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 [ 57.974037] ivtv: End initialization Sound was working BEFORE the upgrade to 8.04 lsb_release -rd: Description: Ubuntu 8.04 Release: 8.04 - apt-cache policy ivtv-utils: ivtv-utils: - Installed: 1.0.3-2 - Candidate: 1.0.3-2 - Version table: - *** 1.0.3-2 0 - 500 http://ar.archive.ubuntu.com hardy/multiverse Packages - 100 /var/lib/dpkg/status + Installed: 1.0.3-2 + Candidate: 1.0.3-2 + Version table: + *** 1.0.3-2 0 + 500 http://ar.archive.ubuntu.com hardy/multiverse Packages + 100 /var/lib/dpkg/status - - Any ideas? + WORKAROUND: /usr/bin/v4l2-ctl -d /dev/video1 --set-audio-input=0 ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/228363 Title: Hauppauge PVR-150 with no audio after upgrading to Hardy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/228363/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
