Using hdparm 9.37-0ubuntu3 on Precise :
oem@oem-desktop:~$ sudo hdparm -i /dev/sda
/dev/sda:
Model=ST3120026AS, FwRev=3.05, SerialNo=3JT169W6
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1,2,3,4,5,6
* signifies the current active mode
oem@oem-desktop:~$ sudo hdparm -i /dev/sdb
[sudo] password for oem:
/dev/sdb:
Model=ST3160023A, FwRev=3.01, SerialNo=3LJ06087
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=312579695
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1,2,3,4,5,6
* signifies the current active mode
oem@oem-desktop:~$ sudo hdparm -i /dev/sdc
/dev/sdc:
Model=HDT722516DLAT80, FwRev=V43OA70A, SerialNo=VD071CTCDA8EBN
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=51
BuffType=DualPortCache, BuffSize=7674kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=321672960
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 1: ATA/ATAPI-2,3,4,5,6,7
* signifies the current active mode
So the buffersize is corectly set. I've not found the changelog for this
but it seems fixed now, at least with these 3 hdds.
** Changed in: hdparm (Ubuntu)
Status: Triaged => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/31072
Title:
Hard drive BuffSize=0kB
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/hdparm/+bug/31072/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
